bloodhawk Posted July 6, 2016 Share Posted July 6, 2016 Sup, fellas bloodhawk here from the NBR forums. Some of the members from there might have seen my obnoxious posts 1 Quote Link to comment Share on other sites More sharing options...
Trondyne Posted July 6, 2016 Share Posted July 6, 2016 I'm from an alien planet.... Nice to finally land.... Trying to d/l a vbios and it seems like this site never lets me d/l or tell me why I can't..... Take me to your leader please. Quote Link to comment Share on other sites More sharing options...
Draekris Posted July 8, 2016 Share Posted July 8, 2016 Hey everyone! I'm a computer science student and have been lurking TI for a few years for a taste of hardware. Finally signed up for an account. And @Trondyne you can't DL files until you've been a member for a week and have 5 quality posts (you probably got a new user message with some useful information). 1 Quote Link to comment Share on other sites More sharing options...
DjSpammer Posted July 11, 2016 Share Posted July 11, 2016 Hello everyone, I'm about a week late on my introduction. But I found this site when searching about white listed WiFi cards and found out that there is a lot of really good information here. So just call me DJ and just want to thank all the different users who help with modifications. 1 Quote Link to comment Share on other sites More sharing options...
SoftReaper Posted July 14, 2016 Share Posted July 14, 2016 Hi everybody, my name is Mickael and i come from the east of the france, i'm a nbr defector as my major reason to join them 5 years ago was the awesome work done by nando with the eGPU and elitbook ownerlounge threads, and now i've saw what it become without him i've decided to move here. hope i'll bring some usefull stuff in the future best regards 1 Quote Link to comment Share on other sites More sharing options...
Trondyne Posted July 15, 2016 Share Posted July 15, 2016 (edited) On 7/8/2016 at 5:08 PM, Draekris said: Hey everyone! I'm a computer science student and have been lurking TI for a few years for a taste of hardware. Finally signed up for an account. And @Trondyne you can't DL files until you've been a member for a week and have 5 quality posts (you probably got a new user message with some useful information). Yes, I found out about that wonderful policy.... So I have to find a reason to post a few more times.... Sounds totally reasonable to me... :/ I particularly like how after 2 posts it says I have zero... Very nice. Edited July 15, 2016 by Trondyne Quote Link to comment Share on other sites More sharing options...
ddscentral Posted July 17, 2016 Share Posted July 17, 2016 Found this while googling for mods for my Asus G751JY. I see you have a nice forum here. Although I'm a software developer by profession, I like to tinker with hardware as well (including some embedded stuff, such as tablets and routers). 1 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 17, 2016 Share Posted July 17, 2016 Been registered here a while it seems but never had the chance to check the place out fully until today... This place is pretty cool, I was deep into the Reflow and Reball scene of all BGA chips until around 6 months ago when I got bored of it, I know quite a bit o the subject and have helped may people start-up and repair boards over the years on other forums. The software side has always intrigued me as a failed student of programming, if you guys have any questions about reballs or reflows hit me up. Quote Link to comment Share on other sites More sharing options...
Founder Brian Posted July 17, 2016 Founder Share Posted July 17, 2016 1 minute ago, drunkenninaj said: Been registered here a while it seems but never had the chance to check the place out fully until today... This place is pretty cool, I was deep into the Reflow and Reball scene of all BGA chips until around 6 months ago when I got bored of it, I know quite a bit o the subject and have helped may people start-up and repair boards over the years on other forums. The software side has always intrigued me as a failed student of programming, if you guys have any questions about reballs or reflows hit me up. Hey @drunkenninajwelcome to the community and I think @Khenglish @Mr. Fox and @johnksss would definitely be happy to have another hardware enthusiast on board that can help w/projects they come up with. Khenglish as you noticed is embarking on core swaps so if you have any tips that could assist him, definitely get in touch here on the forums. 2 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 17, 2016 Share Posted July 17, 2016 5 minutes ago, Brian said: Hey @drunkenninajwelcome to the community and I think @Khenglish @Mr. Fox and @johnksss would definitely be happy to have another hardware enthusiast on board that can help w/projects they come up with. Khenglish as you noticed is embarking on core swaps so if you have any tips that could assist him, definitely get in touch here on the forums. More than happy to help out, I have a lot of tricks I used to do when repairing board traces and reseating BGA tips. I'm still the 2nd highest poster over at BGA Mods on 1,636 posts, wrote quite a few guides there as well before stepping down as a Mod to try new things. Thanks for the warm welcome by the way!!!! 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted July 17, 2016 Share Posted July 17, 2016 Welcome, bro. Glad you're here @drunkenninaj. Quote Link to comment Share on other sites More sharing options...
johnksss Posted July 17, 2016 Share Posted July 17, 2016 Welcome to possibly your new home.:) 1 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 17, 2016 Share Posted July 17, 2016 (edited) 40 minutes ago, Brian said: Hey @drunkenninajwelcome to the community and I think @Khenglish @Mr. Fox and @johnksss would definitely be happy to have another hardware enthusiast on board that can help w/projects they come up with. Khenglish as you noticed is embarking on core swaps so if you have any tips that could assist him, definitely get in touch here on the forums. I just noticed my username is spelt wrong xD. Do you think you I could abuse you admin privileges and ask you to change it to drunkenninja. 23 minutes ago, Mr. Fox said: Welcome, bro. Glad you're here @drunkenninaj. 12 minutes ago, johnksss said: Welcome to possibly your new home.:) Thanks so much, msg me anytime, I'll keep an eye out for posts I might be able to help on... Edited July 17, 2016 by drunkenninaj Quote Link to comment Share on other sites More sharing options...
Khenglish Posted July 18, 2016 Share Posted July 18, 2016 7 hours ago, Brian said: Hey @drunkenninajwelcome to the community and I think @Khenglish @Mr. Fox and @johnksss would definitely be happy to have another hardware enthusiast on board that can help w/projects they come up with. Khenglish as you noticed is embarking on core swaps so if you have any tips that could assist him, definitely get in touch here on the forums. Brian be careful when telling professional BGA people what I do... they tend to cringe at my toaster oven use and proceed to vomit. A toaster oven works more than never though. Using the thermocouple to tell me when I need to crack the door open gives me better temperature regulation than any bga station under $1k. 2 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 18, 2016 Share Posted July 18, 2016 1 hour ago, Khenglish said: Brian be careful when telling professional BGA people what I do... they tend to cringe at my toaster oven use and proceed to vomit. A toaster oven works more than never though. Using the thermocouple to tell me when I need to crack the door open gives me better temperature regulation than any bga station under $1k. Chill man, I'm not here to judge, and your right, you work with what you have to hand and hope for the best. I started out as a hobbyist like most people in that particular field and only bought equipment when the profits made it viable, it looks like you have done a really great job with the tools available to you. Glad you read up on some stuff. Any rework station is better than none; certainly for motherboard work to isolate the heat and not hit reflow temps on every BGA on the board especially the tiny RAM chips, all the same, if I'm not wanted here I can go straight through the same door I came in from. Why you so Salty? Again though looks like you did a good job with the tools to hand, pads looked intact and flush to the board, Reball looked fine also, it has a decent/good chance of success. Quote Link to comment Share on other sites More sharing options...
Khenglish Posted July 18, 2016 Share Posted July 18, 2016 (edited) 18 minutes ago, drunkenninja said: Chill man, I'm not here to judge, and your right, you work with what you have to hand and hope for the best. I started out as a hobbyist like most people in that particular field and only bought equipment when the profits made it viable, it looks like you have done a really great job with the tools available to you. Glad you read up on some stuff. Any rework station is better than none; certainly for motherboard work to isolate the heat and not hit reflow temps on every BGA on the board especially the tiny RAM chips, all the same, if I'm not wanted here I can go straight through the same door I came in from. Why you so Salty? Again though looks like you did a good job with the tools to hand, pads looked intact and flush to the board, Reball looked fine also, it has a decent/good chance of success. It was a joke. I did not mean to be salty. My first few posts on BGA Mods got some skepticism. I was a bit worried that you immediately seeing the toaster would make you disinterested. The first few replies I got on BGA mods told me to stop trying this stuff. Edited July 18, 2016 by Khenglish 2 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 18, 2016 Share Posted July 18, 2016 (edited) 20 minutes ago, Khenglish said: It was a joke. I did not mean to be salty. My first few posts on BGA Mods got some skepticism. I havn't been on BGA Mods for over a year probably, I knew the old owner from years back and when he sold the business I lost interest (just coincidence really). I have no idea what shit those guy are talking over there now, when I was a mod there I banned anyone that was rude or derogatory towards anyone interested in this field, I had zero tolerance because there used to be another website (cvxgameconsolerepair I think it was) where they flamed the new members constantly, a pointless exercise to inflate the ego's of the senior members. Not very different to most forums in that respect, but this place seems cool so I wanna hang around for a while and offer any help I can. If you link me in PM to your BGA Mods post I will log in for the first time in years and give you my support, everything I learnt in this field I either learnt from others or was done by my own practical tests, by the end I pretty much knew everything there was to know and was sharing that information with others. I might grab some of my guides from over there and see if I can get them posted over here. Edited July 18, 2016 by drunkenninja 1 Quote Link to comment Share on other sites More sharing options...
Khenglish Posted July 18, 2016 Share Posted July 18, 2016 31 minutes ago, drunkenninja said: I havn't been on BGA Mods for over a year probably, I knew the old owner from years back and when he sold the business I lost interest (just coincidence really). I have no idea what shit those guy are talking over there now, when I was a mod there I banned anyone that was rude or derogatory towards anyone interested in this field, I had zero tolerance because there used to be another website (cvxgameconsolerepair I think it was) where they flamed the new members constantly, a pointless exercise to inflate the ego's of the senior members. Not very different to most forums in that respect, but this place seems cool so I wanna hang around for a while and offer any help I can. If you link me in PM to your BGA Mods post I will log in for the first time in years and give you my support, everything I learnt in this field I either learnt from others or was done by my own practical tests, by the end I pretty much knew everything there was to know and was sharing that information with others. I might grab some of my guides from over there and see if I can get them posted over here. Again sorry if I offended you. Its great to have you here. Not sure what core swap I will try next, but there's bound to be one. 1 Quote Link to comment Share on other sites More sharing options...
drunkenninja Posted July 18, 2016 Share Posted July 18, 2016 6 minutes ago, Khenglish said: Again sorry if I offended you. Its great to have you here. Not sure what core swap I will try next, but there's bound to be one. Thank you, really appreciate that, I posted one quick guide to trace repairs, (not sure it's the right section though) I still need to get used to the sections. Honestly if you need any advise just PM me, I'm happy to help. 1 Quote Link to comment Share on other sites More sharing options...
strikers Posted July 24, 2016 Share Posted July 24, 2016 Hi all, strikers here. I came across this site looking up information on my alienware 17x laptop. Looks like a great community with lots of knowledgeable people. Hope I can help others too. Quote Link to comment Share on other sites More sharing options...
matteoumb Posted August 3, 2016 Share Posted August 3, 2016 ciao ciao Quote Link to comment Share on other sites More sharing options...
Sougo Posted August 6, 2016 Share Posted August 6, 2016 (edited) Hello to all. My name is Jeremy passionate manga, anime and especially of computers, hardware, software. I'm currently a full rebate on all levels about computer techno. So much for my little presentation. Sincerely Sougo. Edited August 6, 2016 by Sougo Quote Link to comment Share on other sites More sharing options...
MATRIXAD Posted August 15, 2016 Share Posted August 15, 2016 Hi all i have been doing computers since the early ninties up till the present day, I now build my own towers but love the Alienware flexibility. At present i have the m17x rev 3 and rev 4 anf if truthfull i was drawn here by the un locked bios for the rev 4 unfortunatly my excitment was smashed when i was told i could not download until i had made several posts over a week understandable i suppose, Anyway thanks for having me and i will do my best to help where i can. Quote Link to comment Share on other sites More sharing options...
OverTallman Posted August 15, 2016 Share Posted August 15, 2016 (edited) Hello folks, it's OverTallman the Otaku Racer putting my foot onto the Inferno. Some may recognize me in NBR, most known as the one who still use a decade-old D420 as a daily driver, and recently purchased a 2570p. Since I've got my quad core 2570p up and running, I thought I may as well contribute a bit on this matter. Hope to make friends here, too My current workhorses From top to bottom, left to right: Dell Latitude E5510, HP EliteBook 2570p, HP EliteBook 2740p, Dell Latitude D420 P.S. Also have a number of other laptops in my collection. Edited August 16, 2016 by OverTallman 1 Quote Link to comment Share on other sites More sharing options...
johnksss Posted August 16, 2016 Share Posted August 16, 2016 Welcome to the fold! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.