matteoumb

v3 bios for P370EM?

already tryed i send my pc to ceg (clevo center repair) for soldering new pcb to both gpus,and for install 970m

yes atiflash is renamed m i use the exec in this way i heard first only beep sound so dos was started but flash dont work I do not know what I'm doing wrong

ok i tryed but not worked

ty so much for your help i'll try to flash it now i need the xfire cable connected?

yes i already removed all other devices my system boot from dos i can hear the beep from beep.bat obviously my system booting only i if use as primary the card with pcb disconnected my question now is if i upgrade my clevo p370em to nvidia 970m my screen should back to work?now i have a black screen

ok i have a clevo p370em tryed to flash the vbios br43595.003 stock ,taken from technopowerup unfortunately this vbios is corrupted and bricked my two gpus after the reboot my clevo wont boot i have a black screen and also my pc doesnt post (because of two corrupted vbios) so i tryed to reset cmos,switching the gpus but nothing worked,the only solution i found is this: in one 7970m i lifted pin 1 and 4 from pcb (in this way i can bypass the check and allow the system to boot) insert te other gpu to slave slot and trying to flash it but apparently it does not work because to run the flash graphics cards need to be active so recap;i cant pass the boot if i put the vga without pcb lifted pins in the master slot i cant flash the slave gpu from dos if I put the card with disconnected pcb in the master slot my system booting im able to enter in the bootable usb but it seems that atiflash doesnt detect any device. im using this autoexec,bat with a beep .bat that allow me to hear a sound when my pc boot from dos If hypothetically, I take off these two vga, I buy a 970m (clevo) my system should return to work normally even no need to do a blind-flash on the new nvidia card right? and there is a way to flash at least 1 amd gpu inserting in slave slot and flash it from windows or dos?

no one can help me?

I'm still trying to do the blind-flash, but it seems that the various vbios I tried are wrong. I tried these vbios: https://www.techpowerup.com/vgabios/128794/clevo-hd7970m-2048-120605 in this thread i tryed the vbios provided from svl7 and vbios provided by prema, none of these worked the stock vbios for my gpu is BR42768.008 the same that i tryed for do the first flash vbios attempt but maybe that vbios had enduro I do not know what to do, if someone knows and can help me I would be grateful

I'm still trying to do the blind-flash, but it seems that the various vbios I tried are wrong. I tried these vbios: https://www.techpowerup.com/vgabios/128794/clevo-hd7970m-2048-120605 in this thread i tryed the vbios provided from svl7 and vbios provided by prema, none of these worked the stock vbios for my gpu is BR42768.008 the same that i tryed for do the first flash vbios attempt but maybe that vbios had enduro I do not know what to do, if someone knows and can help me I would be grateful

ok after the flash of vbios, the screen is black and I can not see anything become probably my 7970M is bricked, I used this vbios: https://www.techpowerup.com/vgabios/177709/177709 obviously the wrong one for the flash I have used this guide:http://forum.notebookreview.com/threads/guide-blind-flashing-amd-7970m-modded-vbios-for-clevo-p1xxhm-laptops.688656/ I guess my only option is a blind-flash using the correct vbios for my 7970M but do not know where to find it and in any case the procedure would be the same? I could use autoexec.bat the linked guide? sorry for my english I hope is understandable, please helpme

.

.

ciao ciao

there is a way to verify this? the problem occurs even with battery power. still feel a slight whistle coming from the battery charger, but it was this noise even before the occurrence of the problem, what do you think?