LeeT Posted January 2, 2013 Share Posted January 2, 2013 Thanks man i'll buy you a bottel of beer but you should come to Russia first Quote Link to comment Share on other sites More sharing options...
Tonrac Posted January 2, 2013 Share Posted January 2, 2013 Did a test using the latest two Clevo vBIOS.1050V and 1025VHowever, the 1050V version gave me some issues and when flashing, it would give the "unidentified device" issue and not give me proper runs.The 1025V vBIOS allowed me to run at my GPU's physical max (993MHz, no higher and is hardcapped there even when set to 1000) and did several tests.Core/MEM (MHz) : Performance Score 3DMark11993/2350: P8004993/2360: P8046993/2380: P8050993/2400: P8038Seems 993/2380 is the best in terms of points and will be finding one setting stable for gaming without too high of temps (though my max temp was low at 59C; don't ask how).Guess I'll do my end of bargain and give the man another round. @svl7EDIT: Should be from m******[email protected] for $10 USDI got this issue with MSI_FD vbios, related to nvidia driver. (got this issue on driver > to 306.23)The gpu stay at 993Mhz on the Overclocking range of 993Mhz-1005Mhz, but if you OC @1006Mhz it must keep this frequencies. Quote Link to comment Share on other sites More sharing options...
svl7 Posted January 2, 2013 Author Share Posted January 2, 2013 Yeah, that's driver related. I can only adjust in single MHz steps with 306.23 or lower. Else it's 13MHz. Quote Link to comment Share on other sites More sharing options...
naldor Posted January 2, 2013 Share Posted January 2, 2013 Sold my 3920 xm(qs) to get myself an iphone 5, so back on my 3610qm now, got NVIDIA GeForce GTX 680M video card benchmark result - Intel Core i7-3610QM Processor,Alienware M17xR4 score: P7984 3DMarks with 1045/2349 my memory cnat go higher, coz it will make it crash - - - Updated - - - using 1.05v bios - - - Updated - - - Could upload the log if interested?from hwinfio Quote Link to comment Share on other sites More sharing options...
minominti Posted January 2, 2013 Share Posted January 2, 2013 My GPU behaves so weird lately after I flashed new BIOS for my whitebook ms1762 because the core and memory clocks are fixed at 324 Mhz. I was so dumb that I didn't make a backup BIOS Everytime I run a program that uses my GPU my system always ends up with BSOD. Nvdkllm.sys was blamed to be cause in the BSOD. I've tried everything from doing clean install driver to flashing old vbios but without any success. I am currently using svl7 latest vbios for MSI. Could flashing BIOS get me this GPU problem ? Or there is something wrong with my driver and GPU ? I've been searching in google to sort this problem out but I never read flashing BIOS did this to GPU before. Quote Link to comment Share on other sites More sharing options...
CooleRnax Posted January 3, 2013 Share Posted January 3, 2013 can I use Clevo OV BIOS on MSI gtx680m? Quote Link to comment Share on other sites More sharing options...
sirana Posted January 3, 2013 Share Posted January 3, 2013 Sold my 3920 xm(qs) to get myself an iphone 5 Well one could have done better, but I'm not going to start a fight The 1025 Clevo vbios works great so far, stable and doesn't run much hotter. Quote Link to comment Share on other sites More sharing options...
naldor Posted January 3, 2013 Share Posted January 3, 2013 Well one could have done better, but I'm not going to start a fight The 1025 Clevo vbios works great so far, stable and doesn't run much hotter. Well, since my iphone 4 died and I am just a poor student I needed a new phone , will pick up an extreme processor later this year probably an 2920xm/2960xm for the upcomming m18x r1 I am buying (I can buy one extremely cheap , then will sell my R4(with equiping an gtx580m, and use that money to fund the 600 euro costing m18, and with the remaining money buy anohter gtx680m, and buy later this year an r2 motherboard when they get cheaper )) Quote Link to comment Share on other sites More sharing options...
Wei Lu Posted January 3, 2013 Share Posted January 3, 2013 using 1.05v biosHi naldor, the DELL 1.05v bios is stable @1045/2349 in the game? no throttling? what's the temperature? Quote Link to comment Share on other sites More sharing options...
CooleRnax Posted January 3, 2013 Share Posted January 3, 2013 What about MSI 1.05v and 1.025v mods vBIOS? Can't wait to try it. Quote Link to comment Share on other sites More sharing options...
naldor Posted January 3, 2013 Share Posted January 3, 2013 Hi naldor, the DELL 1.05v bios is stable @1045/2349 in the game? no throttling? what's the temperature? hej 10 I am sorry I should have said I am using an clevo gtx680m, if you clock down to like 1023 its stable in game(skyrim,bf3,witcher played em all 3 houres straight with no problem). update, temperature around 68-72 degrees, sometimes even lower Quote Link to comment Share on other sites More sharing options...
anos Posted January 3, 2013 Share Posted January 3, 2013 it's possible to have 80.04.67.00.01 with OV too? because it's the only clevo vBios that support UEFI + secureboot under Win8 also, is actually nibitor open & save trick working to fix vBios checksum? i cannot test since i have no backup notebook to flash Quote Link to comment Share on other sites More sharing options...
svl7 Posted January 4, 2013 Author Share Posted January 4, 2013 I only modified the legacy part. If you want to use a modified vbios, you need to have secureboot and fastboot disabled. I'll put up the new one as well when I get around to do so.Regarding the checksum, no idea whether it would do it properly on the current vbios, but anyway, you can't make a broken vbios working by just adjusting the checksum, so forget that. Quote Link to comment Share on other sites More sharing options...
grechie Posted January 4, 2013 Share Posted January 4, 2013 @svl7 I have just read from page 1 all the way to this very last page, I can tell you what and that is that my head hurts! So much information going on!Yourself, John, fox etc are gods! I'm planning on flashing to the dell 680m vbios (own an M17xR4 now) in your very first post to see how that goes. I'm going to donate to you bosses because this place is truly awesome. Keep up this damn good work!might I just ask, if one was to flash to a dell 680m vbios, would you recommend the bios from your very first post, OR one of the experimental OV ones from your second post? I would be chasing P8000. I do understand that every cards different so I may not be able to achieve this however would love to give it a red hot go! If unsure I may just flash them all! 1 Quote Link to comment Share on other sites More sharing options...
Wei Lu Posted January 4, 2013 Share Posted January 4, 2013 @grechieI have tried the dell vbios at storage voltage and the one with v1.05. With storage voltage, I can OC until 1006/2250, 3d11 GPU score P8100, with v1.05 version. I can OC until 1045/2250 and GPU score P8400. As I am using 17R3 CPU i7 2760QM is not so good so the I got less CPU score and Combined Score. The general score is between P7600 - P7800 can't pass P8000. I will do more test with v1.05 to see the limits of my card.Anyway, there is no throttling at all. All versions work stably. 2 Quote Link to comment Share on other sites More sharing options...
svl7 Posted January 4, 2013 Author Share Posted January 4, 2013 might I just ask, if one was to flash to a dell 680m vbios, would you recommend the bios from your very first post, OR one of the experimental OV ones from your second post? I would be chasing P8000. I do understand that every cards different so I may not be able to achieve this however would love to give it a red hot go! If unsure I may just flash them all!Second post is not just experimental, it's also just some more versions with additional tweaks, e.g. voltage. If you want to go for P8000 GPU score in 2dM11 then you'll need at least 1.025-1.05V. Quote Link to comment Share on other sites More sharing options...
Stev Master Posted January 4, 2013 Share Posted January 4, 2013 the new clevo bios 1.05V works greate. 3DMark11 score:8146 Grafikscore: 8577 Physikscore: 7492 Well done,thx svl7 for the great work Quote Link to comment Share on other sites More sharing options...
grechie Posted January 4, 2013 Share Posted January 4, 2013 @grechieI have tried the dell vbios at storage voltage and the one with v1.05. With storage voltage, I can OC until 1006/2250, 3d11 GPU score P8100, with v1.05 version. I can OC until 1045/2250 and GPU score P8400. As I am using 17R3 CPU i7 2760QM is not so good so the I got less CPU score and Combined Score. The general score is between P7600 - P7800 can't pass P8000. I will do more test with v1.05 to see the limits of my card.Anyway, there is no throttling at all. All versions work stably.Thanks for the information Wei Lu i believe you've answered my question. Thank you :-) Quote Link to comment Share on other sites More sharing options...
Wei Lu Posted January 4, 2013 Share Posted January 4, 2013 Thanks for the information Wei Lu i believe you've answered my question. Thank you :-)Hi grechie, here is the highest score for my DELL 680M with v1.05 vbios. The limit is 1088/2300 max temperature during test is 76°GPU 8703 Physic 7044 Combined 6035. Finally the general score P8061NVIDIA GeForce GTX 680M video card benchmark result - Intel Core i7-2760QM Processor,Alienware M17xR3 score: P8061 3DMarks 1 Quote Link to comment Share on other sites More sharing options...
omega939 Posted January 4, 2013 Share Posted January 4, 2013 @svl7when can msi gt users get the the 1.025- 1.05v vbios mod? tnx Quote Link to comment Share on other sites More sharing options...
Clevorr Posted January 5, 2013 Share Posted January 5, 2013 Well, now running the overvolted 680m vbios on my SLI 680m,s in the new M18x.. All went smooth and no problems at all. We right in summer atm, so just need some cooler nights and will have some fun and see how we go.. @svl7 you are a legend! Quote Link to comment Share on other sites More sharing options...
grechie Posted January 5, 2013 Share Posted January 5, 2013 @svl7 flashed to 1050v bios from the second post, and successfully achieved P8030 3D marks! (only upped core clock for starters) Thanks man I appreciate it! Temperatures are only around 68-70c in BF3 on ultra. Curious...is there more Vcore to be had? or is 1050v the limit? :-) Cheers Quote Link to comment Share on other sites More sharing options...
anseem Posted January 5, 2013 Share Posted January 5, 2013 thanks. but the Dell 680m (80.04.33.00.32) 'OCedition' revised v00 not work in my alineware m18x r2 Quote Link to comment Share on other sites More sharing options...
naldor Posted January 5, 2013 Share Posted January 5, 2013 @svl7 flashed to 1050v bios from the second post, and successfully achieved P8030 3D marks! (only upped core clock for starters) Thanks man I appreciate it! Temperatures are only around 68-70c in BF3 on ultra. Curious...is there more Vcore to be had? or is 1050v the limit? :-) Cheers 1.05v is already a big overvolt tbh, but if we'd go up to 1.075v or 1.1v u greatly increase the risk on destorying your card . - - - Updated - - - Plus the amount of heat will be stupid, no way you ccan play bf3 long on 1.1v. Quote Link to comment Share on other sites More sharing options...
MooNiSLe Posted January 5, 2013 Share Posted January 5, 2013 @svl7 Since you are busy to tweak the GTX 680M VBIOS I decide to modify my GTX 670MX VBIOS by myself Read the thread from the first floor to the last one and finally I succeed! Very thanks for your contribution to the 680M VBIOS! See what I've done All based on my ALIENWARE M15x! Stock Frequency: 600MHz/2800MHz and this one got 1006MHz/4010MHz! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.