anos

bump! i tryed almost everting, i cannot manage to boot UEFI Linux or OSX (without secureboot UEFI is disabled, tryed to load default setting too; with secureboot enaled i can boot only pendrives, so i can install UEFI Linux/OSX, but hard disk is not showed anymore, so i can't boot them...) P370EM, bios V2

1)Load default setting, save and reboot 2)F7, still no UEFI USB device detected nor UEFI label (defaul setting is UEFI: enabled, and OS: Others (win8/secureboot disabled) If i set OS to Win 8 (secureboot enabled), i can boot UEFI USB device, and install UEFI Linux or UEFI OSX, but on restart OS is not loaded because HDD is not showed anymore in boot setting (secureboot disable them). Please, check this!

I trying to boot iAtkos ML3U using a pendrive, but Clevo is not recognizing it as bootable... I have a P370EM with V2 bios, UEFI Enabled, Windows8/SecureBoot Disabled It's a bios issue? EDIT: I tryed with both, removable disk and local disk (2 different pendrives), same problem.. i've noticed that with new V2 bios, "UEFI: " label in Boot Option is not showed anymore

I always had BIG problems booting with 4x8GB DDR3-1600 Geil CL10 on my P370EM (stock or modded bios). I also always used all version of Prema modded bios (always 1T version). Usually after a few of fake boot (it does reboot 10/20 times until it reach bios post and than notebook will work for future restars without problems). I just flashed Prema V2 1T (K1 edition) and after 50 autoreboot notebook still can't power on. So I removed 2x8GB and i flashed 2T version and i put all 32GB back. After many autoreboot, finally (after 2 hours), notebook started to works again... So, notebook works really good with 1T or 2T, but it can't start easily (the first time after a bios flash or a clear cmos) with 32GB of ram. Than, after the first starts it will works normally. Why? It's possible to fix this problem?

it's possible to have 80.04.67.00.01 with OV too? because it's the only clevo vBios that support UEFI + secureboot under Win8 also, is actually nibitor open & save trick working to fix vBios checksum? i cannot test since i have no backup notebook to flash

are new clevo vbios with fixed checksum or they will show as "invalid bios" with nvidiainspector? To fix checksum: open vbios with "nibitor", ignore all error because 680M is unsupported, save the vbios (it will fix checksum automatically), someone can test? i don't have any other card to test if i brick

is possible to have overvolted 80.04.33.00.10 clevo vbios?

ok, with an i7-3740QM with 41x 40x 39x 39x turbo multiplier and 60watt limit, (in full load they throttle from 3.6 to 3.9Ghz), 32GB 1600Mhz, and 2x680M with Clevo 80.04.33.00.10 bios oc revised by svl7 (freq are 954/2399) i can do 45k+ on vantage and 12k+ on 3dmark 11, not bad, but people on Alienware r18x2 can do even better on GPU score using Clevo cards, why? Is there an overvolted version for Clevo 80.04.33.00.10 bios?

Ok, I've flashed Clevo 680M 80.04.33.00.10 oc revised by slv7 for both cards It's normal that nvidiainspector show "INVALID BIOS"? ImageShack® - Online Photo and Video Hosting Also, the card still throttle (at stock speed too) ImageShack® - Online Photo and Video Hosting How it's possible to stop throttling? I tryed MSI ES FD bios but it show artifacts, it's not good for my card

thank you everyone for point me in the right direction, i'll try ASAP to flash a modded vbios and will report back! an other question: is 310.70 WHQL ok for overclocking? it seems that nvidiainspector oc is never activated (it show the max freq, but oc freq is never reached)

3D Mark Vantage is very high for me (P40k+) but 3DMark 11 is very very low (P9400). nVidia cards seems to be throttling when running this benchmark, how i can solve the problem? 310.70 WHQL Win8 x84 and 80.04.33.00.10 vbios i know there are 2 modded vbios for this card, it's possible to flash other version of vbios too? are them sli enabled? (80.04.6x.xx.xx or .01) how it's possible to manually mod the vbios? there is a tool?

Try killer wireless cleaner and an updated driver from killer site, or atheros drivers from atheros.cz ( less customization but much more stable for me )

hi all, i'm italian