Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

As it got pretty difficult for me to keep track of all the mod requests I decided to make a separate thread for bios / vbios modification requests. I hope it will make it easier for me to fulfill as many requests as possible.

If you want to request a mod make sure you read through the following guidelines / rules, posts that do not comply with them will be deleted without further notice.

Rules:

  • You need to have a minimum of five approved posts (or 'T|I elite' status) in order to request a mod.
  • Make sure I didn't already modify the corresponding bios / vbios.
  • When posting a request you agree to flash and test the mod once it's done and post some feedback. (If you don't plan on using the mod then don't bother posting.)
  • I only modify stock firmware. I don't work on anything that has already been tampered with.
    .
  • For BIOS mods I need a link to an original BIOS update directly from the vendor (no mirror link) and most likely a dump of your BIOS (see instructions below).
    I only work on the latest BIOS versions unless there's a very specific reason for using an older one (in this case you need to specify so).
    In addition to this I need a dump of your BIOS as well as some additional information, read the "BIOS backup" section below, provide all the specified files.
    .
  • For VBIOS mods I need a copy of your original vbios. (Only as attachment in a post here or per link to cloud storage such as dropbox, gdrive etc. per PM, filehosters are not accepted).
  • No custom GPU clock requests unless it is for some reason not possible to overclock the corresponding system / GPU per software.
  • No Windows activation mods. Check MDL for this kind of request.

I can't guarantee that I will be able to fulfill a request.

While I will try to keep it fair and consider the order of the requests at least up to a certain degree I will generally work on what I want and feel up to. Popular requests might be treated with higher priority.

BIOS backup:

For Intel 7 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment).

Also grab this tool, run the backup.bat and send me created file. You will need to run it as administrator. If it reports and issue with the PCIe driver you have a crappy AV software and need to disable it temporarily.

If you don't use Windows let me know and I will provide a different tool.

For systems using the 8 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment) and wait for further instructions.

- Thread under construction, more information will be added -

flashChk.zip

Fptw64_(8_series).zip

Fpt_DOS_(8_series).zip

Edited by BAKED
  • Thumbs Up 19

Share this post


Link to post
Share on other sites

Hey svl7,

I´m looking for a VBIOS for my 7970m with Enduro (p170em) to overvolt it.

The stock voltage is 1.05 and I would like to increase it to 1.075v.

My default VBIOS and GPU data (via AMD-Z):

VBIOS version: 015.018.000.000

VBIOS part number: P150EMPX.001

VBIOS date: 2012/03/26 05:22

Thank you very munch in advance

OMAs

P.S. I will donate your help.

Share this post


Link to post
Share on other sites

Hi Slv7, please could you take a look at this 8970m vbios if time allows.

WOuld that be possible to reduce 3D voltage on it please ?

I heard in 3D it is running at 1.025

and 0.975 would be nice to reduce power draw in R2.

Thanks as usual !

HD8970 vbios gpuz.zip

Share this post


Link to post
Share on other sites

Hi Svl7,

First of all thank you for your hard work on the custom vBios you provide! I would like to ask if it's possible for you to customize the GTX 680M vBios in attachment, with adjustable voltage like the vBios you made for 780M?

Thank you,

Best Regards to all

Clevo 680m - 80.04.67.00.01 'OCedition' revised_01.zip

Clevo 680m - 80.04.67.00.01 'OCedition' revised_01.zip

Share this post


Link to post
Share on other sites
Hi, svl7) Could you please modify the GTX 770M from Sager NP8250 (Clevo P157SM)? Tnx

Let me know if everything's working as intended.

Also: I cleaned up that thread. @all who wonder about where their posts are - read the rules in the first post.

Trim discussion got moved to the AW section.

Hey svl7, could you please unlock the voltage and OC limit of the MSI GT60 770m? Thanks.

Let me know if all is working as it should.

I´m looking for a VBIOS for my 7970m with Enduro (p170em) to overvolt it.

The stock voltage is 1.05 and I would like to increase it to 1.075v.

My default VBIOS and GPU data (via AMD-Z):

VBIOS version: 015.018.000.000

VBIOS part number: P150EMPX.001

VBIOS date: 2012/03/26 05:22

Here you go.

EDIT: 770m versions moved to the Kepler mod thread.

Clevo 7970m - 015.018 - P150EM - 1.075v.zip

Clevo 7970m - 015.018 - P150EM - 1.075v.zip

  • Thumbs Up 4

Share this post


Link to post
Share on other sites

Clevo sucks when it comes to MXM support. I think you have to use atiwinflash.

  • Thumbs Up 2

Share this post


Link to post
Share on other sites
Clevo sucks when it comes to MXM support. I think you have to use atiwinflash.

yes it works - thank you and donation is on the way.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

For systems using the 8 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment) and wait for further instructions.

Share this post


Link to post
Share on other sites
GimP;68057']As requested' date=' this is from asus G750JX. [ATTACH']9185[/ATTACH][ATTACH]9186[/ATTACH]

Trying to get access to modifiy BCLK and maybe memory timings, in a perfect world I would love to find a way to force the higher haswell bclk boot strap clocks, and then drop my multi. Every little bit helps when compiling. Also, GTX770m vbios attached, trying to get past +135mhz offset, increase power budget

Can you run the flashChk tool as well please?

Share this post


Link to post
Share on other sites

Is the above 7970m 150/170em vbios something that will work for anyone with a 150em or is this custom for the requester only? Curious because not only can I not download it, I didn't want to presume anything without asking first! :)

Thank you in advance. I've tried leading myself to the trough so to speak but that thread with the information on how to edit your vbios yourself always locks up my browser (chrome) if I try to open page 1. Pages 2 to the end work fine, but they do not contain the important information!

Share this post


Link to post
Share on other sites

Is it possible to unlock the voltage for

Asus G75VX gtx670mx? I already unlocked core and memory overclock, I am running @888mhz core and 2350mhz memory(unless my nvidia inspector is glitched, it could be 1350??)

Share this post


Link to post
Share on other sites
Let me know if everything's working as intended.

Also: I cleaned up that thread. @all who wonder about where their posts are - read the rules in the first post.

Trim discussion got moved to the AW section.

Let me know if all is working as it should.

Here you go.

<fieldset class="postcontent" style="margin: 6px 0px; padding: 0px; border: 0px; word-wrap: break-word;"><legend style="margin: 0px; padding: 0px; color: rgb(0, 0, 0);">paperclip.png.pagespeed.ce.nFUOVIz3Ty.png Attached Files</legend>

</fieldset>

.

Are either of these 770m bios safe for the Asus G750JX or should I just wait? Thanks in advance.

Share this post


Link to post
Share on other sites

That will most likely cause a brick, Asus uses a different (to be more precise crippled) board.

I'll see that I can put up the Asus stuff tomorrow.

Share this post


Link to post
Share on other sites
That will most likely cause a brick, Asus uses a different (to be more precise crippled) board.

I'll see that I can put up the Asus stuff tomorrow.

Share this post


Link to post
Share on other sites

Hello svl7,

Could you change Subsystem ID GTX770M Clevo vbios to MSI vbios?

Hardware ID Clevo vbios

PCI\VEN_10DE&DEV_11E0&SUBSYS_10081462&REV_A1

PCI\VEN_10DE&DEV_11E0&SUBSYS_10081462

VGA Bios Collection: Clevo GTX 770M 3072 MB | techPowerUp

Hardware ID MSI vbios

PCI\VEN_10DE&DEV_11E0&SUBSYS_10E81462&REV_A1

PCI\VEN_10DE&DEV_11E0&SUBSYS_10E81462

https://www.dropbox.com/s/w2vzetjckqgqdoc/11E0-MSI.zip

Here is Clevo_V4 vbios from Svet (En-MSI) with some weird I explain below.

https://www.dropbox.com/s/2dn5ji9cli84gym/11E0V4.rar

In nvflash before flashing, subsystem ID changed to 10E81462, but it showed hardware ID to 0000 in Windows .

PCI\VEN_10DE&DEV_11E0&SUBSYS_00001462&REV_A1

PCI\VEN_10DE&DEV_11E0&SUBSYS_00001462

When flashing back to other vbios it shown 0000 too.

flash MSI to V4 (normal)

http://i1176.photobucket.com/albums/x334/kiba208/MSI_vbios.jpg

flash V4 to MSI (00001462)

http://i1176.photobucket.com/albums/x334/kiba208/MSIV4_to_MSI.jpg

Thank you in advance.

Share this post


Link to post
Share on other sites

Hello!

I have an alienware m15x with a gtx 770m. The only way to get into windows 7 is to disable my onboard sound in bios.

Is there anyway I can fix this like a modified vbios?:83: Because I really like to have sound!

Thanks for your help!

Kenzo

Share this post


Link to post
Share on other sites
Guest
GimP;68706']...<edit> no success in getting the laptop screen to play along.

NVIDIA makes Notebook manufactures pay for licensing 3D VISION per Notebook and per GPU model...the driver checks for motherboard ID, GPU ID, presence of license and "correct" HW ID of internal emitter as well as the HW ID of the internal screen...if for example we brake the line by just changing the internal screen to another revision 3D screen from the same manufacturer, BAM no 3D...

It is possible to get stuff working, but that's not something you just hex in during the lunch brake. ;)

</edit>

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Vincent_8149
      Bonjour, serait-il possible de débloquer les menus cachés dans mon BIOS ? Je dois changer le comportement du ventilateur et désactiver l'option IntelSpeedStep... 
      Lien BIOS 1.8.0 au format .rcv : https://mega.nz/folder/BwsHDIyD#z4k5O7UHSa_lqqDlplC4WA
      Lien :  https://www.sendspace.com/file/lp7yrw
      Je vous serai infiniment reconnaissant si vous répondez à ma demande !
    • By Andrew2009
      Please could you check if it is possible to unlock my A17 BIOS? I have Alienware 17 R5(2013). 120 Ghz 3D. gtx 980 m. I want upgrade to 1070 but I have dark picture. Turns on but does not start with 1070. 980m-All good. What could it be?
    • By spiderthink
      Hi,
      I am looking to remove the bios wifi whitelist restriction for a Lenovo G700 version 7ACN89WW . This is version 3.07
      I have used a programmer to read direclly from bios chip but it has failed. Is there any other method available to remove bios restriction from this laptop?
       
       
       
    • By PepoJ
      Hello there!
      I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
      I wonder if you could help me or give me some advice.
      Thanks in advance.
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.