Bios Release Version – v2.0.0
Updated or Modded Items:
A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it. (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
Here are ALL the things I've added, modded, and enhanced on this bios -
I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI). You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's!
This is a MAJOR breakthrough!
LEGACY SUPPORT Confirmed. Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v184.108.40.2066 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v220.127.116.116 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 18.104.22.168 to v22.214.171.124 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly. I've updated a few more modules that I didn't realize could be updated. (It's only 3 modules, but it's still an update!) It should be released in about a week. Hope this helps ya'll!
Instructions to flash:
Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS! (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!
Be on the lookout as I do plan to release newer version with more updates in the future. However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems. So please be patient!
Thread link for more information and discussion:
I was wondering is there a way to boot into UEFI or EFI with stock bios, and or does the modded Bios allow for Windows 10 to install under UEFI /EFI conditions?
I've installed W10 a few times, and don't seem to be able to get the R1 board to boot via USB, so I'm hoping for a way to install via BD with drivers on a USB thumb-drive for raid and such... I figure this is the best way to do this, but how does UEFI play into the mix? Are there any ways to get UEFI going without it hindering the performance of the computer?
Hello. I'm currently running windows 10 on bios version 1.00 and want to upgrade to 1.03 but cannot boot Ms dos flash in uefi. There is no option to enable Legacy mode and the option to disable uefi in bios is greed out. When I try booting from flash in bios, it shows black screen and returns back to bios screen. My rig is a p157sm. Any help will be appreciated as I'm looking to install prema bios mod.
I need to be able to access the chipset, south bridge, and other advanced settings in my bios.
The stock bios locks out almost everything other than boot order.
I think the BIOS is Aptio V and I've got this dump with fptw64: https://drive.google.com/file/d/0B4ozRmHOIQm-RFRYV2hlTjl6eHM/view?usp=sharing
Never needed to do this just to access some settings before so don't really know what I'm doing.
As with the title, is there any way to get a m17x r3 to use UEFI or is this just a pipe dream? I read over the internet that this requires Dell company itself to refactor the BIOS and release it to the public. Well if that's the case many believe it would be easier to land a man on Mars then to get Dell's help on this issue. Does the hardware itself plays a roll in updating to UEFI ? Well if the motherboard itself doesn't support UEFI and its more of a hardware limitation rather than a software, please let me know and I'll let this dream go, once and for all. Well if not, does anyone else knows of any other way to get a m17x r3 to UEFI-capable ? Imagine fast-booting into win10 and more importantly, a chance to get a 980M working in a m17x r3. (from my understanding 880M is as far as the m17x r3 can go as the 980M requires UEFI-capabilities)
I know my laptop is approaching 7 years old and by now most m17xr3 are phrased out but i still believe there are some owners out there still kicking about with their madly modded-out r3s (like me).
Thanks for the read