Jump to content
EwinRacing Flash Series Gaming Chairs
svl7

NVIDIA Maxwell VBIOS mods - 900m series overclocking versions

Recommended Posts

2 months have passed and still there is no update any vbios mod...although there are so many FEEDBACKS written here..!

Share this post


Link to post
Share on other sites

Hi there I go a question concerning the GPU clock in realtion to the GPU usage.

I can use the highes bost state as long as the GPU Usage is belol a certain point (80%) if the GPU is used above this threshold the boost will not fully be available?

I always thought the boost state depended on the temperature of the system?!?

Would you be so kind as to tell me something about this. Especially: Why would I need a high boost state if the card is only Used to about 65%??

Best regards

phila

Share this post


Link to post
Share on other sites
Alright, gonna start trying overclocking on my 980ms little by little since the stock limit can be easily reached. Which vbios are "better" or what specs do they have? I have only seen GT80 users with prema vbios.

what is the recommended voltage? so far with stock +25mv I can get +135 core +350mhz memory. Higher than that seems unstable and cause artifacts at times/screen freezing etc.

Don't have MSI, but I use Asus GPU Tweak, setting is 1275 core and 5800 memory @ stock voltage. Stable playing hours of Crysis 3.

any news on a 4gb version for the g751 yet guys ? much appreciated

Friend's OC with Asus +135 and 5800 on memory with Asus Tweak is not very different from mine. You can ask and maybe they will be kind to work on it, it's really not a big deal, it's a good OC and the results are comparable to what I see Clevo users are getting with larger OC and over-volting.

Share this post


Link to post
Share on other sites
Don't have MSI, but I use Asus GPU Tweak, setting is 1275 core and 5800 memory @ stock voltage. Stable playing hours of Crysis 3.

Friend's OC with Asus +135 and 5800 on memory with Asus Tweak is not very different from mine. You can ask and maybe they will be kind to work on it, it's really not a big deal, it's a good OC and the results are comparable to what I see Clevo users are getting with larger OC and over-volting.

May be you can post here your result in 3D Mark2011 with stock and OC clocks?

Share this post


Link to post
Share on other sites

Is there an unlocked bios for the 3GB 970m Alienware 17 2015?

Or do I need to get with someone for a custom bios?

Share this post


Link to post
Share on other sites
Best results people have had with the 980m with 8GB on the 4790K?

I hit 11030 firestike with more headroom available.

Share this post


Link to post
Share on other sites
Is there an unlocked bios for the 3GB 970m Alienware 17 2015?

Or do I need to get with someone for a custom bios?

It looks like there's only the 6GB version of the 970M to download. On the first page of the thread svl7 said that he would mod a 3GB version if he had time - looks like he didn't do it. Prema has been doing vBIOS mods of the new Maxwell cards, and my understanding is that they will work on Alienwares too - see if you can find his threads on Tech Inferno & confirm that they're compatible with your Alienware.

Share this post


Link to post
Share on other sites

HI civlciv388a

may i can help u out. What kind of Notebook do u have? And which GPU / GPUs u have? I had the same problem and solved it, so give me/us more informations.

@svl7

I have a problem with ure vBios for the 980m Clevo cards. I got 2 x 980m and flashed both with ure vBios. The problem i have is, that both Cards never go in 3D Clock Mode, that means on 3D games like AC Unity or FC 4 they do not go in 3D mode. I tested the Prema mod for my cards, no problems! Do u have an idea?

Specs:

M18x R2

CPU: i73940XM

RAM: 32GB Corsair Vengance

HDD: 750GB SSD Raid0

Graphics: 2xGTX980m @ Prema OC mod

PSU: 330 Watt Dell

eQualize87

Share this post


Link to post
Share on other sites

Dear svl7

I want overclock my graphic memory clock to a higer frequency,but i can only overclock my GTX870M's memory clock to about 1550,or my GTX980M’s memory clock to about 1476,so is there any way to add the graphics memory voltage?thank you

Share this post


Link to post
Share on other sites

Hey 827270744

There is no way to control the memory voltage. Its not possible to add/unlock an option for that.

eQualize87

Share this post


Link to post
Share on other sites
[ATTACH=CONFIG]14123[/ATTACH]hi can anyone help me please, I have a asus G751JT with GTX970M and I can not flash, getting the error message at the end of the process

Hey, you need to use the nvidia vbios FLash that does not need signature. Just google it and you will find one

Share this post


Link to post
Share on other sites
I have 880m sli. Would it be worth the money to sell my old cards and buy 2 980ms?

No, it isnt worth the money. The performance boost is too low .

eQualize87

Share this post


Link to post
Share on other sites

General question about the 980M's vBIOS; is it GOP enabled? (if that's the right term?) As in, can you boot with a 980M as a discrete card on a system that boots via UEFI? I know you couldn't on some older GTX 660M's without updating the vBIOS.

Share this post


Link to post
Share on other sites
Is it possible to unlock overclocking in the 960m's vBIOS, as per Alienware 13?

Yes. Of course.

Share this post


Link to post
Share on other sites

OK, thank you, you did answer my question in the literal sense but what I'm really after here is a link, download, or a procedure. I mean I'm sure it CAN be done, but as yet I've been unable to come up with anything that works. nVidia has disabled overclocking at the vBIOS and/or driver level, and since this thread is about modded vBIOS for the 970m & 980m, I was hoping to inspire a mod for the 960m as well.

I can provide my stock vBIOS if necessary.

Share this post


Link to post
Share on other sites
OK, thank you, you did answer my question in the literal sense but what I'm really after here is a link, download, or a procedure. I mean I'm sure it CAN be done, but as yet I've been unable to come up with anything that works. nVidia has disabled overclocking at the vBIOS and/or driver level, and since this thread is about modded vBIOS for the 970m & 980m, I was hoping to inspire a mod for the 960m as well.

I can provide my stock vBIOS if necessary.

Upload ure Bios please, i'll give it a try.

eQualize87

- - - Updated - - -

General question about the 980M's vBIOS; is it GOP enabled? (if that's the right term?) As in, can you boot with a 980M as a discrete card on a system that boots via UEFI? I know you couldn't on some older GTX 660M's without updating the vBIOS.

Yes it is enabled. I Use UEFI with 2x980m SLI in my Alienware M18x R2, it works perfectly :-)

eQualize87

Share this post


Link to post
Share on other sites

Hey what is up. I've got an unlocked GTX970m for G751JT with higher clocks(up to 1800mghz core, 8000mghz mem) here is the video as well. All files are public

Share this post


Link to post
Share on other sites
Guest

@den007 please stop distributing the svl7 / Johnksss vBOS via your google drive / youtube channel.

Link people to this Forum instead. THX! :)

Share this post


Link to post
Share on other sites

Hey guys... I have a 980m and Alw17 and M15x.... In M15x the card works flawless, but in alienware 17 when a try to use mnvflash the program get so lazy and I have to be waiting and waiting until i give up and finish the work in Task manager. Had anyone that issue?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Hax
      I have tried to update nvidia drivers of my notebook ge72vr6rf apache pro. The only drivers that works are the ones provided by the msi. The problem is that they haven't updated those since 2016 and I can't play newer games. 
       
      Some say you need to mod your 1060 drivers, which I have no idea how to some says you need to update the flags in ini files. So please help me
       
      Thanks for your time.
    • By mx90
      Hello, I've got a Dell Precision M4700 with a 3940xm. I've read that in this particular CPU and laptop model, the bios is locked because the stock settings are considered an overclock. As-is, the core temps on the CPU do reach up to 90-100. They seem to spike up and down a bit when benchmarked with Intel's Extreme Tuning Utility, but they certainly do reach over 90C. Is there no way to unlock this bios (version a18, though a19 is released - I haven't updated yet, should I?) and even if there were, would my only option be a heatsink mod on top of that?
       
       
      edit: I've mistakenly posted this under Desktop & General Hardware, perhaps a mod could move or delete the thread? Apologies!
    • By mx90
      Hello, I've got a Quadro M2200 (GPU: GM206GL-A Revision A1, and MxM 3.0a Maxwell card) with the following bios: 84.06.76.00.1C
       
      I've read that this card is very similar to the GTX 965m, but that it has been underclocked considerably. It seems to be a good candidate for unlocking since I hardly see the temperature exceed 70C as-is. I'm requesting help with this - I'm not sure if it's possible to simply flash the vbios from a Dell GTX 965m (MxM 3.0a) or if some type of edit of the card's current vbios would do the trick. I'm hoping someone could help me out with the specifics of doing such an edit if that's the case. 
       
      Thanks!
    • By fibul
      Hello Everyone,
      I am an owner of MSI GT70-20C and my GTX770m gpu i now dead.
      I have a question and i hope someone will help.
       
      I have ordered GTX 970m 6GB DDR5 and i cannot find the exact vBios for that graphic card.
      My current bios version is: E1763IMS.51B
       
      Thanks in advance,
    • By victordenis99
      I own an Asus Fx504-gm laptop with an 8th gen i7 and nvidia gtx 1060. I ve been having issues with random hard freezes and I later found out that absolutely anyone with this exact model has the same issue and not even Asus service can fix it as they just replace every component and the problem persists so my guess is that this is software related.
      I ve been noticing that I Always hit power limit(I monitorised it with afterburner) and so I have power limit throttling. The thing is, for this laptop the power limit is locked and I cannot modify it.
      My last resort is to try a modified bios that can unlock the power limit slider. My question is: Is this possible? Are there any modified bioses that can unlock the power limit or the only way is to unlock it via the motherboard? If so, where can I get a reliable modified bios for my laptop and how can I check compatibility? Thx.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.