Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

NVIDIA makes Notebook manufactures pay for licensing 3D VISION per Notebook and per GPU model...the driver checks for motherboard ID, GPU ID, presence of license and "correct" HW ID of internal emitter as well as the HW ID of the internal screen...if for example we brake the line by just changing the internal screen to another revision 3D screen from the same manufacturer, BAM no 3D...

It is possible to get stuff working, but that's not something you just hex in during the lunch brake. ;)

Like I said, I'm all ears to get it going. And yes, I remember reading a post of a gentlemen who upgraded his video card in an alienware laptop only to be violated by that "unsupported panel" message after.

The only thing I can trade in kind is being a guinea pig :D and cooking up some android firmware from source if you're interested.

I've been in I.T. for so long, but always put off programming, its a steep curve from zero. If only it was like the old days and I could fire up a nice TSR program to simply spoof all the info that the nvidia driver wanted to "hear"

Share this post


Link to post
Share on other sites
@-r.-GimP

Here's the vbios, Bios will follow soon.

Let me know if all is fine.

Flashes, boots, then fails at the driver level.

Bang in device manager permanently, occasionally says it requires a restart,

"windows has stopped this device because it has reported problems, code 43"

Tried adjusting a bit in bios, no go, clean install on drivers, different versions, nothing working.

Share this post


Link to post
Share on other sites
Whoops, my bad, this should fix it.

Everything seems to be functioning correctly, tested power target, increase and decrease throttle properly.

Tested thermal target, working as well.

Voltage plane seems to affect not only core clock stability but also very much impacts the ram, this isn't a bad thing in any way, just weird not having individual sliders, tho I know thats just a limitation of the graphics card design.

I haven't pushed it too far into insanity, but even at 100% power target, it takes significantly more clock+voltage+load to flag power as the limiter, so I guess it was nerfed pretty hard by Asus?

Either way, will keep pushing it around and report back, so far after the last 2 hours or so, it's good as gold svl7.

Thank you kindly.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

So I flashed the 1.075V clevo 7970m vBIOS linked earlier and 1040MHz tops out at only 81C with the fans on auto. Think you can make me a 1.1V version?

bup

Also please provide a checksum since I need to flash in windows.

Share this post


Link to post
Share on other sites

Again, @svl7, thank you for the vBIOS for my machine as well. Still looking on that mxm adapter but its bad times lately. I saw the one on ebay but it was only for type I and II, getting the 3a/b I'm coming up with nothing man =\

I found a chinese vendor but I'll have to send them some correspondence directly, as there are no buy links on their website (they are whole salers) but it may be just that simple to send them a message and have them put one on ebay for sale.

In case you want to take the lead, i'm referring to these guys:

Products - MXM TO PCIE,PCI-E TO MXM II -

Share this post


Link to post
Share on other sites
So I flashed the 1.075V clevo 7970m vBIOS linked earlier and 1040MHz tops out at only 81C with the fans on auto. Think you can make me a 1.1V version?

bup

Also please provide a checksum since I need to flash in windows.

I modded a P150EM 7970M vBIOS for another user here if you'd like to try it. It has 1100V version as well and checksum is in the post.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
I modded a P150EM 7970M vBIOS for another user here if you'd like to try it. It has 1100V version as well and checksum is in the post.

Works well!

AMD Radeon HD 7970M video card benchmark result - Genuine Intel® CPU 0 @ 2.40GHz,CLEVO P150EM

The checksum was F300 not F400 by the way. I downloaded and flashed multiple times before restarting to confirm.

This BIOS also seems to be a later version than what I was using. This BIOS does not artifact at the very start of some tests and more programs can read clocks and voltage.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Wow awesome score! :D

Hmmm that's checksum is weird. I downloaded it again and checked using HxD which I use to mod and the checksum is still F400. I normally use ATIflash in DOS and it always reflects the same checksum value that HxD reports.

Is OverDrive working correctly?

Share this post


Link to post
Share on other sites
Wow awesome score! :D

Hmmm that's checksum is weird. I downloaded it again and checked using HxD which I use to mod and the checksum is still F400. I normally use ATIflash in DOS and it always reflects the same checksum value that HxD reports.

Is OverDrive working correctly?

Weird. atiwinflash repeatedly reported a checksum of F300. I was checking by dumping the flash immediately after flashing it.

Overdrive is still not present, but precisionX works flawlessly like on the stock BIOS.

Share this post


Link to post
Share on other sites

OverDrive should work. If its not too much bother you could try re-installing your Catalysts to see if its detected.

Share this post


Link to post
Share on other sites

Need a Bios unlock for my G46VW. A GPU unlock please so I can overclock this thing further than +135 on the core.

Link to original bios: http://dlcdnet.asus.com/pub/ASUS/nb/G46VW/G46VWAS210.zip (note this is a javascript link asus does their downloads weird i will post a working link there is no other way to download this file other than from the link i post or from the asus support page.)

Link 1: G46VW - Notebooks & Ultrabooks - ASUS

Link 2: https://mega.co.nz/#!slVUlBgJ!JX18PlwbNibfQbjyIZRnAU_IMXZUK-nRt1GrsV-t8WY

Please and thank you slv

Edit: Cant run the dumping programs on 8.1 on my asus It says 'Cannot be run on the current platform.'

Share this post


Link to post
Share on other sites

For both requests above, check the "BIOS backup" section in the first post, I need some more information.

Share this post


Link to post
Share on other sites

Hi svl7,

is this MSI 770m - 80.06.54.00.11 'OC edition' - rev02.zip posted in the first page is compatible with MSI MS-16f4 whitebook with GTX 770m? I'm not sure if it can fix the "code 43" error on my video card. I haven't upgraded/changed the vBios of my card but a few weeks ago I'm not able to use it. I tried the usual solutions (reinstall windows, thermal paste, downgrade/upgrade drivers) but no luck. I'm thinking that I messed up with my card using OC apps.

Share this post


Link to post
Share on other sites

Hi svl7,

You posted this a while back, this is the 8.x beta driver that has the Secure Boot option. Windows 8.1 requires this and I'm already using a WLAN card that requires the modded bios that you made. I'm currently using the 2.07 modified bios that you made, and on the same thread, they were saying that it is safe to update to the 8.x? I'm not sure if that is true.

It would be great for the Y580 Windows 8.1 users could have this.

Thanks!

QIWY3090.zip

Share this post


Link to post
Share on other sites
Hi Svl7,

First of all thank you for your hard work on the custom vBios you provide! I would like to ask if it's possible for you to customize the GTX 680M vBios in attachment, with adjustable voltage like the vBios you made for 780M?

Thank you,

Best Regards to all

Hi again svl7,

Can you please give some feedback regarding my initial post? I know that this vBios is already customized by you, but in this version 80.04.67.00.01 you did not provide other voltages except stock :P

Thank you,

Best Regards to all

Share this post


Link to post
Share on other sites

Hey SVL

My 680m in SLI with 3D 120hz has the same identical issue to the 780m SLI 3D 120hz issue that you just fixed recently! (http://forum.techinferno.com/clevo-sager/4980-solved-fix-clevo-p370sm3-sager-np9380-s-120hz-3d-sli-flickering-scanlines.html)

I have uploaded my 680m stock vBIOS, could you please copy what you did to fix that vbios?

I have already tried Clevo 680m - 80.04.67.00.01 'OCedition' revised_01.zip however the issue is still there (voltage remains stock) and underclocking/overclocking does not resolve the problem.

Now I have tried the likes of Clevo 680m - 80.04.33.00.10_'OCedition'_revised_01 - OV 1050v.zip but because that vbios revision doesn't support UEFI/secure boot my OS wont boot...

STOCK.zip

Share this post


Link to post
Share on other sites
Hi Slv7, please could you take a look at this 8970m vbios if time allows.

WOuld that be possible to reduce 3D voltage on it please ?

I heard in 3D it is running at 1.025

and 0.975 would be nice to reduce power draw in R2.

Grab it here.

HD8970_0975v.zip

Share this post


Link to post
Share on other sites

Hello, svl7. Sorry for my English is not very good.

could you modified msi gtx680m?(laptop: gt70 old type..)

I know you have modified msi gtx680m in the post ---"NVIDIA Kepler VBIOS mods - Overclocking Editions, modified clocks, voltage tweaks"

and the vbios now I use is "MSI 680m - 80.04.33.00.24_'OCedition'_revised_02 - OV 1025v.zip " , it is a very good vbios.

But the little disadvantage is that if I want to set the gpu clock/memory to 1000/1200(this is the frequency I use usually), I must use some software as inspector etc..

And for now, another critical problem is that the newest nvidia driver is 331.58, and the driver sets the throttle temperature is 87 Celsius, i think it is a really low temperature, and in Inspecotor, you can't remove the check of the priorize temperature box.post-13866-14494996297225_thumb.jpg

So could you modified a new vbios that contains the feature:

1. Remove the throttle temperature or change it to 95 Celsius.

2. The default gpu clock/memory is 950/1050, and I could use Inspector to higher frequency if I want.

3. The turbo function could work, if the turbo mode is off, the frequency is the ordinary freq set by the manufacture, and if the turbo mode is on, the fre is 950/1050,(of course, if the function is too hard to realize, it doesn't matter.)

4. The voltage is 1.05v, (I have bought the 230w power adapter,haha)

In fact,only the 1st requested feature is important.(^_^), and the other requests is better and better...

And here is the ordinary msi vbios:

GK104.zip

Thanks a lot!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Vincent_8149
      Bonjour, serait-il possible de débloquer les menus cachés dans mon BIOS ? Je dois changer le comportement du ventilateur et désactiver l'option IntelSpeedStep... 
      Lien BIOS 1.8.0 au format .rcv : https://mega.nz/folder/BwsHDIyD#z4k5O7UHSa_lqqDlplC4WA
      Lien :  https://www.sendspace.com/file/lp7yrw
      Je vous serai infiniment reconnaissant si vous répondez à ma demande !
    • By Andrew2009
      Please could you check if it is possible to unlock my A17 BIOS? I have Alienware 17 R5(2013). 120 Ghz 3D. gtx 980 m. I want upgrade to 1070 but I have dark picture. Turns on but does not start with 1070. 980m-All good. What could it be?
    • By spiderthink
      Hi,
      I am looking to remove the bios wifi whitelist restriction for a Lenovo G700 version 7ACN89WW . This is version 3.07
      I have used a programmer to read direclly from bios chip but it has failed. Is there any other method available to remove bios restriction from this laptop?
       
       
       
    • By PepoJ
      Hello there!
      I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
      I wonder if you could help me or give me some advice.
      Thanks in advance.
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.