tcfialho Posted April 25, 2014 Share Posted April 25, 2014 Prema, I have one Sager NP9150 (P9150EM) with Intel HD 4000 + 7970M ATI after try some graphic cards drivers that broken some games I decide format my pc to install Windows 8.1 with Update 1 but after do all windows updates my laptop start to freeze sometimes blue screen that are not directly relacted to ATI dlls... Then I format again end again trying different OS versions and drivers but now without sucess in make my ATI work again. When ATI drivers are uninstalled everything work good but after install ATI drivers sometimes screen is black during install, sometimes after install, sometimes not black screen but system freeze after start some benchmark app to test graphic card... So I don´t no what to do... Now I am with Windows 7 and drivers that come from Sager website the driver installation are OK but after restart system stuck in windows logo screen... I already try flash PREMA 2T again and get the same result... Please Help ME!I am using windows 7 with old sager drivers and Prema Mod V2 2T with latest Intel ME, Intel Me drivers are not installed, but i think i already try with drivers installed and nothing change. The driver update that start with some problems (battlefield 4 sometimes crash and show DX11 error message) is leekm mod for enduro powerexpress... but it´s only a driver and the pc is working with them only some crashes in games because drivers are beta but now I cant install any other driver even formating and trying different versions...Please Help Me! Link to comment Share on other sites More sharing options...
belliash Posted April 26, 2014 Share Posted April 26, 2014 Is it possible to disable dGPU with Prema Mod on P170SM? Im planning to use it under Linux as a KVM passthrough device to Windows 8. Actually, unfortunately, Windows complains the device cannot start. I think thats because dGPY gets initialized while powering on and dGPU led is always on for me. I miss BIOS option allowing to set higher priority on iGPU (like on desktop boards), so that it could use it only, while still powering (but not initializing dGPU). Link to comment Share on other sites More sharing options...
HighBounce Posted April 26, 2014 Share Posted April 26, 2014 has anyone had problems with overclocking on their p170em? i just got mine back from repair (surge destroyed mobo) and installed prema bios. i cant get anything above 4.0ghz. be for when i was running it i was able to hold 4.4ghz on all cores. anyone have any ideas on how i can achieve this again? Link to comment Share on other sites More sharing options...
Khenglish Posted April 26, 2014 Share Posted April 26, 2014 has anyone had problems with overclocking on their p170em? i just got mine back from repair (surge destroyed mobo) and installed prema bios. i cant get anything above 4.0ghz. be for when i was running it i was able to hold 4.4ghz on all cores. anyone have any ideas on how i can achieve this again?Do you mean you can't set over 4, or over 4 crashes? Link to comment Share on other sites More sharing options...
HighBounce Posted April 26, 2014 Share Posted April 26, 2014 Do you mean you can't set over 4, or over 4 crashes?it will start throwing out qril errors or just shut off Link to comment Share on other sites More sharing options...
Guest Posted April 26, 2014 Share Posted April 26, 2014 Prema, I have one Sager NP9150 (P9150EM) with Intel HD 4000 + 7970M ATI after try some graphic cards drivers that broken some games I decide format my pc to install Windows 8.1 with Update 1 but after do all windows updates my laptop start to freeze sometimes blue screen that are not directly relacted to ATI dlls... Then I format again end again trying different OS versions and drivers but now without sucess in make my ATI work again. When ATI drivers are uninstalled everything work good but after install ATI drivers sometimes screen is black during install, sometimes after install, sometimes not black screen but system freeze after start some benchmark app to test graphic card... So I don´t no what to do... Now I am with Windows 7 and drivers that come from Sager website the driver installation are OK but after restart system stuck in windows logo screen... I already try flash PREMA 2T again and get the same result... Please Help ME!I am using windows 7 with old sager drivers and Prema Mod V2 2T with latest Intel ME, Intel Me drivers are not installed, but i think i already try with drivers installed and nothing change. The driver update that start with some problems (battlefield 4 sometimes crash and show DX11 error message) is leekm mod for enduro powerexpress... but it´s only a driver and the pc is working with them only some crashes in games because drivers are beta but now I cant install any other driver even formating and trying different versions...Please Help Me!Doesn't sound good for that AMD card...make sure to have chipset and Intel GPU drivers installed before installing AMD driver...Is it possible to disable dGPU with Prema Mod on P170SM? Im planning to use it under Linux as a KVM passthrough device to Windows 8. Actually, unfortunately, Windows complains the device cannot start. I think thats because dGPY gets initialized while powering on and dGPU led is always on for me. I miss BIOS option allowing to set higher priority on iGPU (like on desktop boards), so that it could use it only, while still powering (but not initializing dGPU).YES, you can disable the dGPU entirely. But the option you should use for Linux is:Change Advanced > Switchable Graphics > PX 5.0 Mode > BACOhas anyone had problems with overclocking on their p170em? i just got mine back from repair (surge destroyed mobo) and installed prema bios. i cant get anything above 4.0ghz. be for when i was running it i was able to hold 4.4ghz on all cores. anyone have any ideas on how i can achieve this again?What did the repair report say? Did they change the mobo or have fun soldering on it? I once got 5 times the same broken mobo from a Clevo Service Center until I decided to buy a used board on eBay and fixed it myself. Link to comment Share on other sites More sharing options...
belliash Posted April 27, 2014 Share Posted April 27, 2014 YES, you can disable the dGPU entirely. But the option you should use for Linux is:Change Advanced > Switchable Graphics > PX 5.0 Mode > BACOWhat does this option really do?I have noticed that if i disable dGPU then its completely powered off and not discovered by OS. Link to comment Share on other sites More sharing options...
Guest Posted April 27, 2014 Share Posted April 27, 2014 What does this option really do?I have noticed that if i disable dGPU then its completely powered off and not discovered by OS.BACO (Bus Active Card Off) dGPU power off (lowest power state).BACO keeps the GPU "warm" so it is at least still reporting temps so it helps with Linux and also prevents the fan getting "stuck high".Then there is another option to entirely disable the dGPU, this is helpful for OS X. Link to comment Share on other sites More sharing options...
HighBounce Posted April 27, 2014 Share Posted April 27, 2014 Doesn't sound good for that AMD card...make sure to have chipset and Intel GPU drivers installed before installing AMD driver...YES, you can disable the dGPU entirely. But the option you should use for Linux is:Change Advanced > Switchable Graphics > PX 5.0 Mode > BACOWhat did the repair report say? Did they change the mobo or have fun soldering on it? I once got 5 times the same broken mobo from a Clevo Service Center until I decided to buy a used board on eBay and fixed it myself.i am pretty sure its a new mobo. i got my laptop from Malibal. they told me all of my ssd's were destroyed but when i got the laptop back all i had to do was reflash the firmware and now they all work great. if they couldnt figure that out i dont think they could solder a mobo and it still be working lol Link to comment Share on other sites More sharing options...
rich123321 Posted April 27, 2014 Share Posted April 27, 2014 Hello Prema. Do you have any ETA when the NP8268-S P150SMA Bios will be modded? Cannot wait! Link to comment Share on other sites More sharing options...
Guest Posted April 30, 2014 Share Posted April 30, 2014 Prema Mod v1 for W230SS released and now in the OP. ENJOY! Link to comment Share on other sites More sharing options...
deadsmiley Posted April 30, 2014 Share Posted April 30, 2014 I don't have one of those but I do appreciate very much your work.Sent with love from my Galaxy S4 1 Link to comment Share on other sites More sharing options...
DMC Posted May 1, 2014 Share Posted May 1, 2014 Hi Prema Looking forward to testing/using the BIOS on my new shiny P150SM-A (although it will be after 5 posts! i always get stuck after the first post with what to say , ill try and think of 4 jokes). I'm assuming we need to backup the old bios/download it (although i cannot find it anywhere on the Clevo website (seems a very basic website to me!). Just in case of me doing something wrong! Sorry if this has been asked before, just 165 pages to read through!! Many Thanks Link to comment Share on other sites More sharing options...
Guest Posted May 2, 2014 Share Posted May 2, 2014 Hi PremaLooking forward to testing/using the BIOS on my new shiny P150SM-A (although it will be after 5 posts! i always get stuck after the first post with what to say , ill try and think of 4 jokes). I'm assuming we need to backup the old bios/download it (although i cannot find it anywhere on the Clevo website (seems a very basic website to me!). Just in case of me doing something wrong! Sorry if this has been asked before, just 165 pages to read through!! Many Thanks Latest stock BIOS & EC are in the OP, too. Link to comment Share on other sites More sharing options...
DMC Posted May 2, 2014 Share Posted May 2, 2014 Latest stock BIOS & EC are in the OP, too.Brilliant, many thanks Perma Link to comment Share on other sites More sharing options...
iggymoo Posted May 2, 2014 Share Posted May 2, 2014 Hello everyone, I have a clevo w230ss and i've installed the prema bios mod and i have been trying to install osx without success so far. I have followed the instructions in the tutorials for disabling the dgpu, cfg lock and setting uefi to other, and I have tried to atleast see the osx install screen by 3 different ways: osx with clover, the myhack method, and unibeast. Nothing works, I olnly get a kernal panic like in this pic: http://picbug.ru/image-375B_5363A623.jpg In my clevo i have a i7 4810mq. Any ideas on what to do to get osx working? Link to comment Share on other sites More sharing options...
skdubg Posted May 2, 2014 Share Posted May 2, 2014 Prema Mod v1 for W230SS released and now in the OP.ENJOY! hi, which changes you have made for us? greetings Link to comment Share on other sites More sharing options...
Guest Posted May 3, 2014 Share Posted May 3, 2014 Hello everyone, I have a clevo w230ss and i've installed the prema bios mod and i have been trying to install osx without success so far. I have followed the instructions in the tutorials for disabling the dgpu, cfg lock and setting uefi to other, and I have tried to atleast see the osx install screen by 3 different ways: osx with clover, the myhack method, and unibeast. Nothing works, I olnly get a kernal panic like in this pic: http://picbug.ru/image-375B_5363A623.jpg In my clevo i have a i7 4810mq. Any ideas on what to do to get osx working? Try with Mavericks 10.9 (13A603) MD5: 6179a219e1bf7634fb321fabb8d3288d hi,which changes you have made for us? greetings All changes of the W230ST and then some, will put up the changelog during the weekend... Still tweaking some stuff for the W230SS: Link to comment Share on other sites More sharing options...
Khenglish Posted May 3, 2014 Share Posted May 3, 2014 wtf 1400mhz on the core? Maxwell is an insane clocker. That takes LN2 on kepler. Link to comment Share on other sites More sharing options...
Guest Posted May 3, 2014 Share Posted May 3, 2014 Though they are 'eating' voltage like crazy a lot translates into raw processing power with very little loss into heat...some do 1500Mhz...power draw remains at about 50-60W. Though there is a larger spread of quality with those chips...it's like NVIDIA's tes-trun. http://www.3dmark.com/3dm/2994950 Link to comment Share on other sites More sharing options...
Khenglish Posted May 3, 2014 Share Posted May 3, 2014 Again that's crazy. My 7970m is only 21% faster with double the memory bandwidth, 43% more die area, and twice the power draw.Hopefully the big GM104 chip clocks sky high as well (and runs on a P150EM). Link to comment Share on other sites More sharing options...
iaTa Posted May 3, 2014 Share Posted May 3, 2014 Intel Management Engine Interface (MEI) Version 10.0.1.1000 WHQL (1.5MB) Link to comment Share on other sites More sharing options...
POWER Posted May 3, 2014 Share Posted May 3, 2014 Hey Prema, any progress on P1xxEM and 780M? Link to comment Share on other sites More sharing options...
Cadder Posted May 3, 2014 Share Posted May 3, 2014 Hey i just installed premamod on my w230ss. I wanted to tweak my cpu- can anyone tell me what value shall i put under |Processor Current (Limit 1/8 Amp). My cpu is 4810mq Link to comment Share on other sites More sharing options...
HighBounce Posted May 3, 2014 Share Posted May 3, 2014 any one having a problem with Kernel power 41 errors? i keep getting these any time i run my p170em over 4ghz Link to comment Share on other sites More sharing options...
Recommended Posts