nitro_uk Posted September 6, 2013 Share Posted September 6, 2013 Hi Prema. I installed p370em k2 bios. All went well and it shows v2 into the bios info with your boot logo, but no custom options thats you added.... All the options are still the same, am i missing something? Link to comment Share on other sites More sharing options...
JPCM Posted September 6, 2013 Share Posted September 6, 2013 I wanted to say Thank You! Prema for your great work! After buying my first clevo i will be asking alot of questions ^^ I have been reading alot about the new clevo´s with 4700mq & 8970m but i cant find any post about someone successful overclocking the 4700mq. does someone have a link for me with overcloking results? Link to comment Share on other sites More sharing options...
jaykop Posted September 6, 2013 Share Posted September 6, 2013 Hello I am having problems trying to flash to the latest prema bios for the clevo p370em3 I have used Rufus set it to ms-dos and unrared the files to the usb stick but when I press f7 and enter the usb stick I type update.bat but keeps coming up with bad command can someone please advise me what I AM doing wrong thanx ... Link to comment Share on other sites More sharing options...
greg_p Posted September 6, 2013 Share Posted September 6, 2013 When you type dir on msdos cmd line, could you see the update.bat file in the root directory? Link to comment Share on other sites More sharing options...
Aloys Posted September 6, 2013 Share Posted September 6, 2013 I wanted to say Thank You! Prema for your great work! After buying my first clevo i will be asking alot of questions ^^I have been reading alot about the new clevo´s with 4700mq & 8970m but i cant find any post about someone successful overclocking the 4700mq. does someone have a link for me with overcloking results?I think, overclocking not so much high are 8970m, because it is update architecture 7970m? Link to comment Share on other sites More sharing options...
Khenglish Posted September 6, 2013 Share Posted September 6, 2013 Hello I am having problems trying to flash to the latest prema bios for the clevo p370em3 I have used Rufus set it to ms-dos and unrared the files to the usb stick but when I press f7 and enter the usb stick I type update.bat but keeps coming up with bad command can someone please advise me what I AM doing wrong thanx ...You want to run step1.bat, then after reboot step2.bat 1 Link to comment Share on other sites More sharing options...
M.D. Posted September 7, 2013 Share Posted September 7, 2013 Hey prema just wanted to ask you a quick question. Is there any update on getting the 770M working in the EM series of notebooks? I don't know if there is a better place to ask this question at so I just placed it here. Sorry for the clutter. Link to comment Share on other sites More sharing options...
sansuihai Posted September 8, 2013 Share Posted September 8, 2013 I bought the W230ST,and flashed the 05 bios,but the display driver always dumped .who have the old bios ,i want to flash back. Link to comment Share on other sites More sharing options...
Aloys Posted September 8, 2013 Share Posted September 8, 2013 i have а problem to flash guide.P170EM_17_12_Stock.rari was flash this versionP170EM_17_12_PM_v2.rarAfter a successful flash, i was downloaded attachment.after step2.bat, "not enough available memory!" what did wrong?And i cant go in reboot (ctrl+c not work)The problem was resolved.)I got to set BIOS, replacing the AFUDOS file:from the archive P170EM_17_12_Stock.rarand was pasted bios prema`s. P170EM_17_12_PM_v2.rar Link to comment Share on other sites More sharing options...
N3ST Posted September 9, 2013 Share Posted September 9, 2013 Hello Prema, a new ME firmware is available : Station-Drivers - Intel Management Engine version 8.1.50.1456 Link to comment Share on other sites More sharing options...
ManilaByNight Posted September 9, 2013 Share Posted September 9, 2013 Hello Prema, a new ME firmware is available : Station-Drivers - Intel Management Engine version 8.1.50.1456Unfortunately I don't understand French. Isn't there any English version for instructions on how to apply this update? Is this safe and official?Update: Never mind, I was able to figure it out. Link to comment Share on other sites More sharing options...
greg_p Posted September 10, 2013 Share Posted September 10, 2013 It's only for anti-theft and corporate security...Intel Active Management Technology - Wikipedia, the free encyclopedia Link to comment Share on other sites More sharing options...
moxalis Posted September 10, 2013 Share Posted September 10, 2013 Hello guys. I'm kind of new to flashing bios so I thought I'd ask more experienced people before doing anything.I just updated the bios to stock 1.02.17 from 1.02.14. Is it safe to flash the modded bios? And which one from the list is the latest?Thanks! Link to comment Share on other sites More sharing options...
Guest Posted September 10, 2013 Share Posted September 10, 2013 Hello prema, I have a couple of question about your bioses. Actually I have a P170em with a 3630qm, 8GB of 1866 corsair vengeance, a Crucial M4 256MB as primary and a 320GB as secondary, running W8 fine. My bios was 1.02.17 ans EC 1.02.12. I tried to update to you V2 bios K2/2T and couldn't manage to have it boot. Actually It seems that it cannot find the M4 SSD, and got BSOD. I think I tried all combinations of uefi, non uefi, ahci, ide mode... I have to revert to 1.02.17 stock that is working fine in ide mode, but this configuration is not working with your mod. Do you have any clue? I would be happy to run your bios for some reason, the unlocking of the BLK is one of them and more globally the XTU support. Thanks anyway for your work, clevo should retribute you for this work as it makes their laptop quite more enjoyable... Just select & set your M4 as first boot drive in BIOS once... Hi Prema. I installed p370em k2 bios. All went well and it shows v2 into the bios info with your boot logo, but no custom options thats you added.... All the options are still the same, am i missing something? All changes for P-EM series are "under the hood" and don't require you to change BIOS settings... I wanted to say Thank You! Prema for your great work! After buying my first clevo i will be asking alot of questions ^^I have been reading alot about the new clevo´s with 4700mq & 8970m but i cant find any post about someone successful overclocking the 4700mq. does someone have a link for me with overcloking results? Yo have 4 extra multis unlocked to go above stock, just use Intel XTU Software to set them... Hey prema just wanted to ask you a quick question. Is there any update on getting the 770M working in the EM series of notebooks? I don't know if there is a better place to ask this question at so I just placed it here. Sorry for the clutter. The 770M should also work in P1x0EMs once I am done with the Mod... Hello Prema, a new ME firmware is available : Station-Drivers - Intel Management Engine version 8.1.50.1456 THX! Was traveling, will update the OP with the easy flash tool soon... EDIT: DONE >>> ME firmware v8.1.50.1456 now in the OP. PW: premamod.com (Mind that an 8 Series ME Firmware is only for 2012 systems (P-EM, W-Ex) and not 2013 systems (P-SM, W-Sx) It's only for anti-theft and corporate security...Intel Active Management Technology - Wikipedia, the free encyclopedia That's Intel AMT. Intel ME firmware is an essential part of the system residing on it's own flash-chip on the motherboard. It controls voltage levels and clock-rates etc... Hello guys. I'm kind of new to flashing bios so I thought I'd ask more experienced people before doing anything.I just updated the bios to stock 1.02.17 from 1.02.14. Is it safe to flash the modded bios? And which one from the list is the latest? Thanks! YES you can use the Mod. The best version for you should be P170EM_17_12_PM_v2.rar or P150EM_17_11_PM_v2.rar (depending on your screen size). If your Windws key happens to be on the left side of the space bar you have to use the K2 version of it... Link to comment Share on other sites More sharing options...
N3ST Posted September 12, 2013 Share Posted September 12, 2013 Thank you prema for the ME firmware.Quick question I have a P170EM, but I can't find a way to OC my 7970m did anyone sucessfully oc his 7970m and how?thank you. Link to comment Share on other sites More sharing options...
moxalis Posted September 12, 2013 Share Posted September 12, 2013 Thank you prema for the ME firmware.Quick question I have a P170EM, but I can't find a way to OC my 7970m did anyone sucessfully oc his 7970m and how?thank you. Link to comment Share on other sites More sharing options...
N3ST Posted September 12, 2013 Share Posted September 12, 2013 It's pretty easy. You just have to disable ULPS through the registry.Run regedit.exe and go to "HKEY_LOCAL_MACHINE > SYSTEM > ControlSet001 > Control > Class > {4D36E968-E325-11CE-BFC1-08002BE10318} > 0001..." and change the value of "EnableULPS" to 0.There might be the EnableULPS option in more numbered files, check them all just to make sure.I used MSI Afterburner to OC.I already disabled ULPS, and I can't oc my 7970m, even with afterburner, i tried to change the option in the general settings, nothing worked so far.Did I need to change the config file to do that, I am using the 3.0 beta 14.I can even flash the bios :/ Link to comment Share on other sites More sharing options...
moxalis Posted September 12, 2013 Share Posted September 12, 2013 I already disabled ULPS, and I can't oc my 7970m, even with afterburner, i tried to change the option in the general settings, nothing worked so far.Did I need to change the config file to do that, I am using the 3.0 beta 14.I can even flash the bios :/I've read that the newer versions of MSI are missing a DLL needed for ATI cards. From what I've tried the 2.2.1 version is the most stable. Try to download that one and also make sure that you enable OC mode by doing the necessary changes in the MSIAfterburner.cfg file.I think that Afterburner works without having to install it so give it a go since I have it pre-configured.MSI Afterburner.rar Link to comment Share on other sites More sharing options...
Guest Posted September 19, 2013 Share Posted September 19, 2013 Updated the OP with ME Firmware v9.0.21.1462 for Clevos 2013 models (W230ST, Pxx0SM...) ENJOY! Link to comment Share on other sites More sharing options...
victortan001 Posted September 19, 2013 Share Posted September 19, 2013 hi Prema! Is this firmware modified or original? Thanks for uploading it ^.^ Link to comment Share on other sites More sharing options...
Guest Posted September 19, 2013 Share Posted September 19, 2013 hi Prema! Is this firmware modified or original? Thanks for uploading it ^.^ That's the stock ME. I push modded MEs directly with my Mods as they have to be flashed in a different manner. Also my "regular ME Firmware" updates won't alter the modded part, so that stock and Mod systems can be updated without altering the way they work. Link to comment Share on other sites More sharing options...
Tonrac Posted September 19, 2013 Share Posted September 19, 2013 Hi PremaDo you think you can mod my P150hm Bios in order to support GTX680M officially? (In fact i dream to stop modify my inf driver).Do you think that you will succeed to make the GTX780M working on P150HM? On PxxEM?Thanks for all you done for us Link to comment Share on other sites More sharing options...
victortan001 Posted September 19, 2013 Share Posted September 19, 2013 That's the stock ME. I push modded MEs directly with my Mods as they have to be flashed in a different manner. Also my "regular ME Firmware" updates won't alter the modded part, so that stock and Mod systems can be updated without altering the way they work. haha ok! that's great to know expect a donation from me soon ^.^ keep up the good work! Link to comment Share on other sites More sharing options...
steberg Posted September 19, 2013 Share Posted September 19, 2013 That's the stock ME. I push modded MEs directly with my Mods as they have to be flashed in a different manner. Also my "regular ME Firmware" updates won't alter the modded part, so that stock and Mod systems can be updated without altering the way they work. Sounds complicated, but knowing your bios modding skills, it will all work great! Thanks for the updated ME, just flashed my P150SM, works fine! Link to comment Share on other sites More sharing options...
zymphad Posted September 19, 2013 Share Posted September 19, 2013 PREMA, on the 3740QM, do I need to use XTU to OC or can I unlock something in the BIOS? Link to comment Share on other sites More sharing options...
Recommended Posts