Jump to content
EwinRacing Flash Series Gaming Chairs
Wotan

MS-16F2 w/GTX770m Need vBios Please Help!

Recommended Posts

Here the MSI GTX 770M OC Vbios.

[ATTACH]15662[/ATTACH]

What gives further this vbios?

Blue card GTX 770M from Clevo works perfectly, without the need to modify cooling.

Thank you all for the wonderful descriptions and help in choosing the card to GT780DX.

Share this post


Link to post
Share on other sites

Hello everyone,

I'am trying to upgrade my MSI GT780DX-406US (Nvidia GTX570M) GPU to 'Nvidia 3GB GTX770M MXM 3.0', my question is should I go for a Clevo or MSi brand? Not much of a tech./comp. guru person just want to plug n' play without alot of modification if necessary. Tnx All

 

MSi - http://www.ebay.com/itm/Nvidia-3GB-GTX-770M-MXM-3-0-N14E-GS-A1-MSI-GAMING-VIDEO-Card-GDDR5-3GB-/181928863277?hash=item2a5bce262d:g:c0kAAOSwhcJWQodF

 

Clevo - http://www.ebay.com/itm/CLEVO-NVIDIA-GTX-770M-3GB-Vedio-card-for-MSI-Clevo-and-Alienware-/321963346768?hash=item4af682cb50:g:MXUAAOSwJkJWhaFy

 

Also what is a good 'Thermal pad' and Thermal paste' to use for this? Liquid metal good too? Tnx

Edited by Johnny13laze

Share this post


Link to post
Share on other sites
On 22.7.2013 at 9:59 PM, Wotan said:

Hi guys,

I've gotten myself into a sort of funky pickle:

I have installed a GTX770m in my MS-16F2 to replace the now antiquated GTX560m. After some heatsink modification on the mill and new thermal strips, the card went in quite easily. Now, my problem is that Nvidia's software, nor GPUz or any other install-able software will recognize the card. Nearly everything recognizes my display adapter as "Standard VGA adapter". However, when running Nvidia autodetect on my machine, it does detect the GTX770m. Additionally, I backed up the existing vBios on the card and the display adapter was recognized correctly, so I know its not just a matter of having a dead card.

I already tried flashing my computer's bios with a newer and unlocked version. The flash was successful, but the video card situation hasn't changed.

Does anyone have a version of the GTX770m vBios, or even better, and MSI specific copy? Any help in solving this issue would be greatly appreciated.

Thanks gents

You only need to flash the MSI Vbios of the GTX 770M,then You don`t need to modify the Driver Inf.

MSI 770m - 80.06.54.00.11 'OC edition' - rev02.zip

 

Share this post


Link to post
Share on other sites

I have just bought a MSI MS-1W0B1 GTX 770M for $239 off eBay. I will be putting it in a GT70-0NC motherboard. MS-17621 ver 1.0 (specifically)I just hope it's a good lasting card than my old 680M that died on me after a Starcraft 2 gaming for 3 hours last November.

Edited by Bizeek

Share this post


Link to post
Share on other sites
On ‎4‎/‎3‎/‎2016 at 3:17 PM, Bizeek said:

I have just bought a MSI MS-1W0B1 GTX 770M for $239 off eBay. I will be putting it in a GT70-0NC motherboard. MS-17621 ver 1.0 (specifically)I just hope it's a good lasting card than my old 680M that died on me after a Starcraft 2 gaming for 3 hours last November.

 

I know this thread is kind of old, but I am doing the exact thing you are. Right now I'm having difficulty installing the card on Windows 10 as it only shows up as "Microsoft Display Adapter". Hopefully I can figure this out soon.

Share this post


Link to post
Share on other sites
11 hours ago, WakeUpLate said:

 

I know this thread is kind of old, but I am doing the exact thing you are. Right now I'm having difficulty installing the card on Windows 10 as it only shows up as "Microsoft Display Adapter". Hopefully I can figure this out soon.

Shure that Your Card from MSI or with MSI Vbios?

 

Share this post


Link to post
Share on other sites
11 hours ago, WakeUpLate said:

 

I know this thread is kind of old, but I am doing the exact thing you are. Right now I'm having difficulty installing the card on Windows 10 as it only shows up as "Microsoft Display Adapter". Hopefully I can figure this out soon.

Grab the hardward ID from the hardware properties and post, or take a picture snap of the card and post it to see if it really is an MSI card. Mine works with Win7Home 64bit, i pre-installed the drivers before installing my card and its worked great so far.(but no more gaming on it, only for Video editing now. Been 2 months for me already.  

Share this post


Link to post
Share on other sites
1 hour ago, Bloetschkopf said:

Shure that Your Card from MSI or with MSI Vbios?

 

The seller says it came out of a GT70, same model as mine.

1 hour ago, Bizeek said:

Grab the hardward ID from the hardware properties and post, or take a picture snap of the card and post it to see if it really is an MSI card. Mine works with Win7Home 64bit, i pre-installed the drivers before installing my card and its worked great so far.(but no more gaming on it, only for Video editing now. Been 2 months for me already.  

I actually was up all night and figured it out, holy smokes. The INF I had made was not working, so I downloaded a different modified one from laptop video and was successfully able to get it working. Now I need to flash the OC BIOS to the card and the mainboard as well.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      NVIDIA 'Maxwell' VBIOS mods
       
       
      Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
      The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
      List of available VBIOS mods:
       
      Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments  
      Screenshot demonstrating the capabilities of the 970m versions:

      >> Read the instructions carefully before flashing! <<
      If anything is unclear after reading or if you have additional remarks, please post in the thread.
       
      Flashing:
       
      - Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
      - Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
      - After the flashing is done: Enable the GPU once again in the device manager.
      - Reboot
       
      Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
      Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
       
      Donation link in case you want to buy me a beer

      Thanks and cheers!
    • By svl7
      Files contained in this archive:
      FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 11.0.6.1702].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 11.6.0.1702].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip  
      For information on how to use the files in this archive, see here:
       
       
      My donation link in case you want to buy me a beer
    • By Anderitos135
      I have a iBuypower CZ-17 laptop, with a 2012 AMI BIOS that has E1762 as the version, which I believe means I have an MSI G70 motherboard. It has a 675MX GPU, but it's not useable in Windows 10 despite being "seen" in the device manager. I believe an updated, unlocked BIOS would fix my issue and have located the thread on this site with the BIOS I need.

      First of all, am I right? Will this fresh BIOS make my laptop that originally ran Windows 8 work with this old GPU?

      And second, I created this account, will wait 24 hours and made this post. Is that enough to allow me to download the file, or do I need to post elsewhere?

      Thanks!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.