Guest Posted September 19, 2013 Share Posted September 19, 2013 Hi PremaDo you think you can mod my P150hm Bios in order to support GTX680M officially? (In fact i dream to stop modify my inf driver). Do you think that you will succeed to make the GTX780M working on P150HM? On PxxEM? Thanks for all you done for us Yes, I can Mod the PxxHM to support the 680M without inf Mods...I also have the 780M "working" in P1x0EM, we will have to see about the HMs...right now I am far too busy with Haswell Mods... PREMA, on the 3740QM, do I need to use XTU to OC or can I unlock something in the BIOS? On your P150EM better just use XTU, fixed OC values in BIOS should be avoided if possible. Link to comment Share on other sites More sharing options...
candemir2005 Posted September 19, 2013 Share Posted September 19, 2013 Clevo W251EFQ/W270EFQ I have this motherboard where can I find any bios mod? Thank you best regards CPU: i5 3210m GPU: gt 635m Link to comment Share on other sites More sharing options...
CoolPrizes Posted September 20, 2013 Share Posted September 20, 2013 right now I am far too busy with Haswell Mods... So we can expect your bios mod for the P157SM soon...? Link to comment Share on other sites More sharing options...
clevo.maniac Posted September 20, 2013 Share Posted September 20, 2013 Prema? Which situation have we with bios for p370sm? ThxWysyłane z mojego GT-I9505 za pomocą Tapatalk 2 Link to comment Share on other sites More sharing options...
sorelhorse Posted September 20, 2013 Share Posted September 20, 2013 wow great work Prema, cant wait for the w230st bios, ill be sure to donate! Link to comment Share on other sites More sharing options...
tocirahl Posted September 20, 2013 Share Posted September 20, 2013 Hey prema, would it be possible for you to mod the w740su bios? I don't see anything about it in the thread. Just wondering if it were possible/plannedSent from my SGH-M919 using Tapatalk 2 Link to comment Share on other sites More sharing options...
kingsisqo Posted September 20, 2013 Share Posted September 20, 2013 Hi guys. where is the w230st bios. i saw a post saying it was on here. i see only one on page 1 stating stock bios. Link to comment Share on other sites More sharing options...
zymphad Posted September 20, 2013 Share Posted September 20, 2013 PREMA I was able to overclock the base frequency before, but then it disappeared, how do I get it back?- Reflashed the BIOS/Redownloaded from link. Does that mean my 3740QM somehow got locked? Link to comment Share on other sites More sharing options...
lu161513 Posted September 21, 2013 Share Posted September 21, 2013 Good Job!Will p370em support GTX780m in the future? Link to comment Share on other sites More sharing options...
Bazooka Tooth Posted September 21, 2013 Share Posted September 21, 2013 Hey Prema I've recently flashed your latest modded bios onto my p150em and everything went well except I keep losing my overclock settings in intel extreme tuning utility every couple of restarts and when coming out of hibernation, I apply and save my settings every time but they keep going back to stock, my processor is a 3720qm and I'm overclocking to 3.8ghz on all 4 cores which has been proven to be safe for this cpu, any idea what could be causing it, btw is it safe to apply 120s of turbo time to this cpu? Thanks Link to comment Share on other sites More sharing options...
zymphad Posted September 23, 2013 Share Posted September 23, 2013 Reverting back to 8.1.50 ME driver seemed to fix it for me. Have BCLK again. Link to comment Share on other sites More sharing options...
lastnikita Posted September 23, 2013 Share Posted September 23, 2013 Hi guys. where is the w230st bios..... i see only one on page 1 stating stock bios. Link to comment Share on other sites More sharing options...
chap Posted September 24, 2013 Share Posted September 24, 2013 hey my current bios version is xxxx.6 so it should be safe directly flashing prema bios and the actual EC version right?im stoked to go for it , but i cant download the bios already.thanks very much in advance prema Link to comment Share on other sites More sharing options...
chap Posted September 24, 2013 Share Posted September 24, 2013 hey you recommend win-dos , which version and where can i get it.....and also in the flash how to u dont explain how to do the boot stick, with the hp tool or do u use any better tool? Link to comment Share on other sites More sharing options...
Guest Posted September 24, 2013 Share Posted September 24, 2013 hey my current bios version is xxxx.6 so it should be safe directly flashing prema bios and the actual EC version right?im stoked to go for it , but i cant download the bios already. thanks very much in advance prema right, flash ahoy! hey you recommend win-dos , which version and where can i get it.....and also in the flash how to u dont explain how to do the boot stick, with the hp tool or do u use any better tool? If you read the OP you will be surprised to find THIS link. Link to comment Share on other sites More sharing options...
chap Posted September 24, 2013 Share Posted September 24, 2013 i cant select the usb stick to boot. i have win7 and the stick is in non usb3.0 portstick is formated with rufus and ms dos, after that bios/ec files extractred on stick without folder....tried everything formated it 3 times, can select it....even in evry usb port Link to comment Share on other sites More sharing options...
Guest Posted September 24, 2013 Share Posted September 24, 2013 i cant select the usb stick to boot. i have win7 and the stick is in non usb3.0 portstick is formated with rufus and ms dos, after that bios/ec files extractred on stick without folder.... tried everything formated it 3 times, can select it....even in evry usb port If you press F7 during boot it should show up in the boot selection. If not press F2 and enter the BIOS setup and load setup defaults there then save and exit and try F7 again. Link to comment Share on other sites More sharing options...
zymphad Posted September 25, 2013 Share Posted September 25, 2013 PREMA, do you think you can do a BIOS that remaps the keyboard keys to match a Steel Series backlit keyboard? Link to comment Share on other sites More sharing options...
chap Posted September 26, 2013 Share Posted September 26, 2013 hey, i tried everything, it does not work.... the stick gets recognized instantly on other computers but not in my clevo. i put it in the only usb2.0 on the right side. i tried several dos files, all get recognized on other computers i loaded the factory defaults in bios big time... usb3.0 drivers r installed eventhou this should not be an issue anny suggests? note: im not a overclocking/flashing etc. noob , even if i sound like one i know pretty much what i do, most time cheers Link to comment Share on other sites More sharing options...
Guest Posted September 26, 2013 Share Posted September 26, 2013 hey, i tried everything, it does not work....the stick gets recognized instantly on other computers but not in my clevo. i put it in the only usb2.0 on the right side. i tried several dos files, all get recognized on other computers i loaded the factory defaults in bios big time... usb3.0 drivers r installed eventhou this should not be an issue anny suggests? note: im not a overclocking/flashing etc. noob , even if i sound like one i know pretty much what i do, most time cheers Is the BIOS in UEFI mode? If so that needs to be disabled by setting OS to "Win8" and then back to "Other" and then save and exit. Link to comment Share on other sites More sharing options...
Rolle Posted September 26, 2013 Share Posted September 26, 2013 Are you planning to create a custom BIOS for W230ST? Link to comment Share on other sites More sharing options...
chap Posted September 26, 2013 Share Posted September 26, 2013 where can i change this setting. in the bios i only have "uefi shell" and i cant change this settingthere is no such setting in my bios where it says win8 or other or anything concerin windowsSOLVED: i first disabled intel rapid start technologie (not sure if it has anything 2 do with it) thern i was in the bios lurking for win8 setting, then i noticed between 1st boot HDD, 2nd boot BD Drive , 3rd Realtek, there was a gap between 2nd and 3rd..... when i clicked on this gap DOS started loading..... so funny , could have been that i never get it.now after i got ur perfect bios prema, i can select win8 or others b4 this oiption was not availableThank you very much forr your response and kind help! Link to comment Share on other sites More sharing options...
white-star Posted September 27, 2013 Share Posted September 27, 2013 I updated bios in my clevo p150em and i guess that it was succesfull, because when I pres fn+9 full fan work fine. But is it normal that at about 43 degrees gpu fan starts, even when I press full fan twice and do not use this card (only using internet) ? Link to comment Share on other sites More sharing options...
Guest Posted September 27, 2013 Share Posted September 27, 2013 Are you planning to create a custom BIOS for W230ST?https://twitter.com/PremaMod/status/383188704824541184 Link to comment Share on other sites More sharing options...
Postulho Posted September 27, 2013 Share Posted September 27, 2013 Prema, my boot logo have a weird bug, do you know what is this ? Link to comment Share on other sites More sharing options...
Recommended Posts