Jump to content
EwinRacing Flash Series Gaming Chairs
Guest

[BIOS/vBIOS - MODS] Prema Mod™ & Stock

Recommended Posts

Guest

What happens if you raise the Turbo boost time to full?

Share this post


Link to post
Share on other sites

hi, setting it higher doesn't solve it :/ i've also tried to set all to max in xtu , no matter what settings i use same thing happens as without any overclock:(

Share this post


Link to post
Share on other sites
hi, setting it higher doesn't solve it :/ i've also tried to set all to max in xtu , no matter what settings i use same thing happens as without any overclock:(

Increase processor ICC max and give that a shot... Also in XTU, add a graph or a number in side pane for thermal, current or power throttling and monitor that...

Sent from my LG-H811 using Tapatalk

Share this post


Link to post
Share on other sites

hi, here is a screenshot that includes all you have mentioned. As you see theres no throttling , cpu runs normally at first and then drops and locks at 3.49ghz...post-39935-14495000930409_thumb.jpg

Share this post


Link to post
Share on other sites

@Prema

I have an Nvidia 970m and saw you have a vbios of 970m-G. Is the G-sync 970M-G compatible with my current 970m?

post-7316-14495000931761_thumb.jpg

Thanks

Share this post


Link to post
Share on other sites
Guest

Guess that's not the pic you wanted to upload... ;)

No you can not cross-flash G-sync and regular model (since GTX6xxM ID change is done by MXM board hardware not vBIOS), some systems will even reward you with no more internal screen output.

Share this post


Link to post
Share on other sites
Guess that's not the pic you wanted to upload... ;)

No you can not cross-flash G-sync and regular model (since GTX6xxM ID change is done by MXM board hardware not vBIOS), some systems will even reward you with no more internal screen output.

LOL. I just renamed my 970m to Titan X.. btw.. here is my 970m hardware ID

post-7316-14495001016029_thumb.jpg

Share this post


Link to post
Share on other sites

hello i have problem with your bios for clevo p157sm my laptop is turning on with 3 or 5 bootloops after that boot to windows and works fine. its that normal ?

Share this post


Link to post
Share on other sites
Guest
hello i have problem with your bios for clevo p157sm my laptop is turning on with 3 or 5 bootloops after that boot to windows and works fine. its that normal ?

Load BIOS setup defaults...

If that doesn't help set the RAM Command Rate to T2.

Share this post


Link to post
Share on other sites
Load BIOS setup defaults...

If that doesn't help set the RAM Command Rate to T2.

Thanks for your great work !! now is working well !

Share this post


Link to post
Share on other sites

Hi,

have a XMG U706 (Clevo P770DM-G) with GTX 970m G-sync.

I can't use official nvidia drivers (installation error). Only Clevo or XMG Drivers are working.

Is it possible to use the one from the first post? Are they compatible with g-sync?

I tried the "CLEVO_6GB_GTX970M-G_OC_PM_v1.1.1" from https://biosmods.wordpress.com/stock/

No luck: Board ID mismatch.

What vBios could be used to install official nvidia Drivers?

Share this post


Link to post
Share on other sites
Guest
Hi,

have a XMG U706 (Clevo P770DM-G) with GTX 970m G-sync.

I can't use official nvidia drivers (installation error). Only Clevo or XMG Drivers are working.

Is it possible to use the one from the first post? Are they compatible with g-sync?

I tried the "CLEVO_6GB_GTX970M-G_OC_PM_v1.1.1" from https://biosmods.wordpress.com/stock/

No luck: Board ID mismatch.

What vBios could be used to install official nvidia Drivers?

You have to wait for the mods for the new board.

As for driver please post your GPU HWID as shown in device manager.

You may need a newer BIOS.

Share this post


Link to post
Share on other sites
You have to wait for the mods for the new board.

As for driver please post your GPU HWID as shown in device manager.

You may need a newer BIOS.

Thanks for answer.

The HWID is PCI\VEN_10DE&DEV_1618&SUBSYS_77031558

I found already a modded Driver (inf file modded) and could install the Driver in win10 (disabling driver signing).

No problems have been detected yet.

post-18474-14495001026564_thumb.jpg

2 Questions:

With a modded vBios for the GTX970m it is possible to use the nvidia Drivers out of the box?

Is it also necessary to update the Bios of the Mainboard?

Share this post


Link to post
Share on other sites

Hi Prema!

Well I have a problem , I ordered a P771DM -G except that the G -Sync is not working.

The reason is that I have a 970M with 13D8 ID and only then 970M with ID 1618 on for the G- Sync. What should I do ? A VBIOS update may change the ID of my graphic card to spend in 1618 ?

Share this post


Link to post
Share on other sites
Hi Prema!

Well I have a problem , I ordered a P771DM -G except that the G -Sync is not working.

The reason is that I have a 970M with 13D8 ID and only then 970M with ID 1618 on for the G- Sync. What should I do ? A VBIOS update may change the ID of my graphic card to spend in 1618 ?

You will need a new GSync version of the GPU.. There are slight hardware changes between the 2 versions, well a resistor actually... So talk to your reseller..

Sent from my LG-H811 using Tapatalk

Share this post


Link to post
Share on other sites

i have clevo p770zm-970m gsync, currently im only on sshd, im planning to upgrade to samsung m.s pcie ssd p950 pro, but it uses NVMe which default clevo bios of mine which have no NVMe features.. can prema mod for p770zm-gsync can have NVMe seeting? :( tq so much

Share this post


Link to post
Share on other sites
Guest
i have clevo p770zm-970m gsync, currently im only on sshd, im planning to upgrade to samsung m.s pcie ssd p950 pro, but it uses NVMe which default clevo bios of mine which have no NVMe features.. can prema mod for p770zm-gsync can have NVMe seeting? :( tq so much

My ZM Mods all have NVMe support. ;)

Thanks for answer.

The HWID is PCI\VEN_10DE&DEV_1618&SUBSYS_77031558

I found already a modded Driver (inf file modded) and could install the Driver in win10 (disabling driver signing).

No problems have been detected yet.

[ATTACH=CONFIG]16354[/ATTACH]

2 Questions:

With a modded vBios for the GTX970m it is possible to use the nvidia Drivers out of the box?

Is it also necessary to update the Bios of the Mainboard?

That's the correct HWID, just wait for NVIDIAs next driver release. They may just have been too slow integrating it this time...

Share this post


Link to post
Share on other sites

@ prema, tq..will try flashing prema mod bios :) will get full x4 pcie lane speed right by using NVMe .. :65:

Share this post


Link to post
Share on other sites

sorry noob question.. at 2nd page whats ME firmware for?

Sent from my SM-N9208 using Tapatalk

Share this post


Link to post
Share on other sites
Hi, the current bios Prema supports gtx 980 in clevo P170SM ?</pre>

Yes it does, I have a 970M installed on mine.

Share this post


Link to post
Share on other sites

if i flash the prema mod bios.. thus i need to reinstall windows? im using windows 10 pro 64bit

Sent from my SM-N9208 using Tapatalk

Share this post


Link to post
Share on other sites
if i flash the prema mod bios.. thus i need to reinstall windows? im using windows 10 pro 64bit

Sent from my SM-N9208 using Tapatalk

You might need to reinstall GPU drivers at worst but no you don't need to reinstall Windows ...

Sent from my LG-H811 using Tapatalk

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Yes it does, I have a 970M installed on mine.

the Amazon has several kits with the gtx 970 , what should I buy? it has none to the clevo p170SM

Thanks for help!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By blaz_evic
      Hello

      I upgraded my old laptop with i7-3632qm and its working fine, temps are ok but he wont boost. Lenovo g500s could be bought with i7-3632qm and it had same cooling as was 2020m so i dont think cooling is problem. Can i bios unlock? I cant acces advanced settings in bios. i need help

      thanks
    • By Klem
      If someone wants upgrade Wi-Fi card and remove witelist, or unlock hidden additional menus and settings, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread.
    • By felipe001998
      Hello fellow technicians, I have acer e1-531 that after installing an i5 (from factory it comes with a celeron b960) started to shut down after 30 minutes, searching the internet I found that it would be necessary to make a modification in the bios to accept this processor, could someone help me with this case?
    • By TetroM
      Hello everyone,
      My new laptop Thunderobot Zero 11800H_RTX3060 have a locked bios. I tried CPU undervolt via ThrottleStop utility and Intel XTU utility, but they didn't work. I heard I need to unlock advanced settings in BIOS to unlock these utilities. So, I need help to unlock hidden advanced settings. Thanks!
    • By x86-64
      My laptop's CPU is i7 4700MQ, iGPU is GMA HD 4600, and dGPU is NVIDIA GeForce GTX860m.
      Please send me a modified BIOS(.ROM) file with GMA HD 4600 disabled among the two graphics.
      Stock BIOS Firmware : https://url.kr/kpegx5 (4MB)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.