Jump to content
EwinRacing Flash Series Gaming Chairs

TomJGX

T|I Advanced Member
  • Content Count

    171
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by TomJGX

  1. You can't undervolt with Inspector? Maxwell doesn't allow UV through software..need a vBIOS undervolt.. Sent from my LG-H811 using Tapatalk
  2. Prema see your PM Seriously, you should make UV versions of your Maxwell vBIOSs
  3. @Prema sent you a PM, would be grateful if you make a low voltage mod for me like last time
  4. You might need to reinstall GPU drivers at worst but no you don't need to reinstall Windows ... Sent from my LG-H811 using Tapatalk
  5. You will need a new GSync version of the GPU.. There are slight hardware changes between the 2 versions, well a resistor actually... So talk to your reseller.. Sent from my LG-H811 using Tapatalk
  6. Increase processor ICC max and give that a shot... Also in XTU, add a graph or a number in side pane for thermal, current or power throttling and monitor that... Sent from my LG-H811 using Tapatalk
  7. Fergus for the love of god, don't overclock... You are increasing temps.. How many times to tell you? Also when are you getting Gelid GC Extreme? Sent from my LG-H811 using Tapatalk
  8. Fergus stop overclocking... You will burn out your GPU... Have you applied new paste to GPU? If so temps are too high still.. Have you bought Gelid yet? Get some new thermal pads for GPU.. Sent from my LG-H811 using Tapatalk
  9. No it isn't a conductor, it should be fine.. Extreme will be better but this is no slouch either I think... See if you can find something better in case... Sent from my LG-H811 using Tapatalk
  10. Where are you from? The pastes which you should use are the 2 above I mentioned or Zalman STG2 Sent from my LG-H811 using Tapatalk
  11. The temps are too high.. Arctic silver 5 is old and junk nowadays... What other pastes can you get? Sent from my LG-H811 using Tapatalk
  12. According to the images, CPU is throttling due to high temps and so is the GPU... 90C++ isn't safe.. I would firstly stop overclocking.. 2nd thing to do is remove the bottom cover, clean fans and remove dust and then repaste your GPU and CPU with some good thermal paste... Use something like IC Diamond or Gelid GC Extreme... I wouldn't overclock your GPU, you will burn it out... Prop up the back of your laptop with some books or something as a temporary solution but do the repaste... Sent from my LG-H811 using Tapatalk
  13. Fergus, before you do any overclock, wtf are your temps in game? I have a feeling with all the variation in fps you are overheating.. Download HWinfo64 and let us know your max GPU and CPU temps while playing some game.. Sent from my LG-H811 using Tapatalk
  14. Dude do a FS run... Also that Physics score is atrocious.. Is your 4910MQ throttling? Even my 3630QM can get a higher score... Sent from my LG-H811 using Tapatalk
  15. I think he meant that he needs to make a vBIOS for the 2nd card, which is called a slave card in SLI.. Should be fine.. Give Prema some time.. Sent from my LG-H811 using Tapatalk
  16. Here it is: https://www.facebook.com/CLEVOEXTREMEGAMING?fref=ts
  17. Where did you get your laptop from? Was it from a UK reseller like Scan, XMG, PCS Specialist? If you did, ask your reseller first... Otherwise, I'd suggest looking at CEG Extreme... a German reseller... They should be able to sell you a motherboard without making a fuss like the UK resellers.. They're also quite cheap... got my P771ZM from them! Fastest way to contact them is through Facebook message.. search for Clevo Notebooks and it's got a German address and it's them.. Sent from my LG-H811 using Tapatalk
  18. Dear me I know the feeling...Where are you located firstly? Sent from my LG-H811 using Tapatalk
  19. That is precisely why we have an unlocked vBIOS... NVIDIA have limited OCing but with this vBIOS no such problems.. Sent from my LG-H811 using Tapatalk
  20. I wouldn't install on either OS's.. Hold off on 353.00/.06 for now IMO.. Sent from my LG-H811 using Tapatalk
  21. Do you want to kill your computer? Windows 10+ NVIDIA+Alienware doesn't work.. I've had my LCD killed by this.. Sent from my LG-H811 using Tapatalk
  22. Umgh so what is the safest drivers for AW owners with 970M/980M on Win 8.1? I've been running 353.00 but looks like it's time to update lol..
  23. @J95 as I have been also asking in my PM's, how did you successfully get past the TDP limit in the end? I have tried various combinations of things in this thread however it would be really helpful for me and other owners if you could get together a list of things that need to be done to get past it, like BIOS settings etc... I have disabled MSR lock, remove the TDP lock and tried various combinations of settings however this isn't getting anywhere.. As on my thread in NBR, the minute I start the XTU stress test, the power limit gets hit in like 5 secs and clocks throttle from 4.3Ghz on 4 cores to 3.8GHz... My Firestrike Physics score is 10950 is latest bench, which is the highest ever for me however if there is anymore that can be eeked out, do let me know! Thanks, Tom Edit: I have got this showing in the BIOS.. Turbo power limit registers are not matching... This seems to be the problem for me... Any suggestions?
  24. @J95 can you please share BIOS settings for removing motherboard power limit since I now have unlocked BO
  25. Unlocked BIOS installed... Just doing rest of steps @J95... Edit: I have installed everything however J95 2 points, 1. I don't want to mess around with Creative drivers... I don't have any of those chipset issues and don't want that so I'll stick to old drivers (I have the latest ones on AW website).. do the new drivers actually make any difference? 2. I still have CPU TDP throttle... What settings should I set in the BIOS to prevent this? I have BD PRODCT disabled along with MSR... Maybe [MENTION=119]Mr. Fox[/MENTION] can also help?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.