Jump to content
EwinRacing Flash Series Gaming Chairs
ErYani

Increase GTX 660m Voltage in Y580 For Better Overclocking :)

Recommended Posts

Hello Everyone , I Love overclocking but as i look in 3dmark best gtx660m is for asus not lenovo and that pisses me offso i tried to overclock mine all the way to 1300 core and 3100 memory thats insane however that asus overclocked all the way to 1380/3280 that insane i know so i looked further and i found what i really need is a little boost in voltage the default voltage is V.1.1 i wanted at least V.1.15 So if any1 could help me i will be thankful and ohh i already flashed svl7's moded bios with 1 ghz core speed please if some1 can mode the vbios of gtx660m and increase voltage to v1.15 that would be awsome and beat the hell out of that acer and cheerio :))

Here Is A Gpu-Z ScreenShot :)) post-10506-14494994360612_thumb.gif

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
I would like a bios with a lil tweak for voltage, I run mine at 1250/[email protected] 1.10 mV

1.15mV should bring it to 1300 at least

How Did u Reach 1.10 mv O.o , my max voltage is 1.1 mv .

Share this post


Link to post
Share on other sites

There's no way to increase the voltage on Nvidia cards is there? I mean...the Lightning after a flash and the Classified with EVbot, but not mobile versions I don't think.

Share this post


Link to post
Share on other sites

Not per software, I'll mod the vbios when I get the chance.

Share this post


Link to post
Share on other sites
Not per software, I'll mod the vbios when I get the chance.

Thanks Sir , I Cant Wait.

Share this post


Link to post
Share on other sites
Not per software, I'll mod the vbios when I get the chance.

I would apperciate that too! Thanks for the custom bios. What software do you use?

Share this post


Link to post
Share on other sites
Not per software, I'll mod the vbios when I get the chance.

SO Any News :))

Share this post


Link to post
Share on other sites

Pay me and I will!Just kidding. In three weeks I will make it for you for free. I won't go higher than 1.15v If you want anything higher. Do it yourself. 1.15v isnt going to make much difference anyway. maybe 100mhz extra at most

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Pay me and I will!Just kidding. In three weeks I will make it for you for free. I won't go higher than 1.15v If you want anything higher. Do it yourself. 1.15v isnt going to make much difference anyway. maybe 100mhz extra at most

What About 1.25v i think it's good to go and thank you anyway dont worry about the cooler i have ic diamond plus a nice fan cooler the temp after overclock is 65~68 C So no worries about the temp and thank you again :))

- - - Updated - - -

Pay me and I will!Just kidding. In three weeks I will make it for you for free. I won't go higher than 1.15v If you want anything higher. Do it yourself. 1.15v isnt going to make much difference anyway. maybe 100mhz extra at most

I Am Willing To Pay If U Are Interested Just PM ME :)@jester_socom

Share this post


Link to post
Share on other sites
What About 1.25v i think it's good to go and thank you anyway dont worry about the cooler i have ic diamond plus a nice fan cooler the temp after overclock is 65~68 C So no worries about the temp and thank you again :))- - - Updated - - -I Am Willing To Pay If U Are Interested Just PM ME :)@jester_socom
I was actually joking. But my donation link is in the BIOS Mods thread of the Y500 (the thread which is not pinned). Work that's based on svl7's work I share with him obviously :)Consider buying TechInferno's Elite subscription instead. http://www29.zippyshare.com/v/8776771/file.html first try a.rom, if that doesn't work try b.romIt's possible that 1215mv is the real maximum.Make a backup of your current ROM first.I need to experiment more on this during the holidays.report back which one works.
  • Thumbs Up 1

Share this post


Link to post
Share on other sites
I was actually joking. But my donation link is in the BIOS Mods thread of the Y500 (the thread which is not pinned). Work that's based on svl7's work I share with him obviously :)Consider buying TechInferno's Elite subscription instead.Zippyshare.com - 1215mv-1250mv.zip try a.rom, if that doesn't work try b.romIt's possible that 1215mv is the real maximum.Make a backup of your current ROM first.I need to experiment more on this during the holidays.report back which one works.

- - - Updated - - -

I was actually joking. But my donation link is in the BIOS Mods thread of the Y500 (the thread which is not pinned). Work that's based on svl7's work I share with him obviously :)Consider buying TechInferno's Elite subscription instead.Zippyshare.com - 1215mv-1250mv.zip try a.rom, if that doesn't work try b.romIt's possible that 1215mv is the real maximum.Make a backup of your current ROM first.I need to experiment more on this during the holidays.report back which one works.

- - - Updated - - -

I was actually joking. But my donation link is in the BIOS Mods thread of the Y500 (the thread which is not pinned). Work that's based on svl7's work I share with him obviously :)Consider buying TechInferno's Elite subscription instead.Zippyshare.com - 1215mv-1250mv.zip try a.rom, if that doesn't work try b.romIt's possible that 1215mv is the real maximum.Make a backup of your current ROM first.I need to experiment more on this during the holidays.report back which one works.

Hey Again :)

I Tried Both a and b .rom didnt work i tried both ways to flash using the dos it says that my bios is protected and the insydeflash v5.13 "lenovo offical flasher" it says EC file size input error! @jester_socom

Share this post


Link to post
Share on other sites

quick questions, what version of the bios is this? and does this include the whitelist that svl7 has?

Share this post


Link to post
Share on other sites

My laptop keeps on locking down and I see artifacts after installing this BIOS. Can someone make a BIOS with the voltage in between.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.