Jump to content
BudMarLeY

New SAGER/Clevo Group

Recommended Posts

I created a group if anyone who owns or has owned a SAGER/Clevo Notebook.

Feel free to post up your Notebook you have or had in this thread and I will add you to the group!

Thanks everyone!

SAGER Owners Group

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

I have a Sager np9380-s 3d with a GTX 780m, 16 gigs of ram and I like to be part of this group. Thanks.

Share this post


Link to post
Share on other sites
I have a Sager np9380-s 3d with a GTX 780m, 16 gigs of ram and I like to be part of this group. Thanks.

bring up your post count and then itll let me add you

Share this post


Link to post
Share on other sites

I just pulled the trigger on mine as well, so feel free to add me.

Sager NP9380 - i7-4800 , 780 sli, 16gb

Share this post


Link to post
Share on other sites

Sorry new here, but what exactly do you do with a group? I just got my np9380 as of yesterday so I could join...but I have a feeling I'm following the trend here. >.<

I saw the (small) photo of your sager, and while I can't completely appreciate the full resolution of your skin due to post limit, I want to ask you how happy are you with it? I debated for some time whether or not to get one, and ultimately decided not to due to fear of it looking cheezy. Is the inside also skinned around the keyboard/screen? If so, can you post a shot showing it off?

Share this post


Link to post
Share on other sites
Sorry new here, but what exactly do you do with a group? I just got my np9380 as of yesterday so I could join...but I have a feeling I'm following the trend here. >.<

I saw the (small) photo of your sager, and while I can't completely appreciate the full resolution of your skin due to post limit, I want to ask you how happy are you with it? I debated for some time whether or not to get one, and ultimately decided not to due to fear of it looking cheezy. Is the inside also skinned around the keyboard/screen? If so, can you post a shot showing it off?

i only got the lid skinned. didnt need to get too fancy just wanted to make my notebook stand out a little bit.

as for the quality, top notch. its rather thick and they folded it under the lid so it wont peal. it can get quite a few nicks on it quite easily though, but i rather it nic the artwork then the lid of the screen.

i have a page setup that has the image. alice

as for a high res, i think this may suffice

http://s11.postimg.org/4mpce7keq/IMAG0087.jpg

Share this post


Link to post
Share on other sites
Buds in that zip lock? ;)

haha i wish, being in the military and in on base housing would be badddd. mmkkk

Share this post


Link to post
Share on other sites

I'd like to join the group as well, considering both my laptops are Clevos. Currently fine tuning between performance and heat with further modified settings without use of undervolting on the W230ST. P150EM is still a beast though... no issues whatsoever.

Share this post


Link to post
Share on other sites

Metabox P170EM i7-3630QM

32GB DDR3 PC3-12800 Kingston RAM

AMD Radeon 7970M 2GB GDDR5 940/1400 72% Gamut Matte FullHD

Samsung 840 Series SSD 120GB

HGST Travelstar 7K1000 1TB SRT cached by Plextor M5M 64GB mSATA

WD Scorpio Blue 1TB @ OBHD

2xWD Caviar Green 2TB RAID0 @Welland ME-580J eSATA

Intel Advanced-N 6235 WiFi

Chicony 230W PSU

Windows 7 Pro 64-bit

PREMA MOD BIOS V2

Please add me. :)

Share this post


Link to post
Share on other sites

Just got my Sager NP9380-S 2 weeks ago, and it is sweet. I would love to join this thread. I just have to get my post count up. I also wrapped mine, but with carbon fiber. I originally put the carbon fiber wrap on the bezel of the display but I ended up taking it off, because it was way too distracting. Apparently the carbon fiber has a little bit of a sheen on it at when the display is on. Kinda bugged me so I got rid of that part. I also covered my touchpad with it...soooo much better than the stock one. My finger kept getting stuck on it when mousing. Now it is nice and smooth.

Share this post


Link to post
Share on other sites

Mine is coming in the mail, waiting to flash the Vbios as well

MODEL: NP9380-S

GPU: (SLI) 780M

RAM: 24GB

CPU: Intel 4700

Share this post


Link to post
Share on other sites

Hello,

I have a W230ST with the following config:

i7 4700Mq - 16Gb 1833Mhz - 2x 120GB mSATA m500 - 500Gb Toshiba 830 - GTX765m 2Gb

Please add me.

Thanks

Share this post


Link to post
Share on other sites


























































































































Here is what I have, purchased a year ago

M-TECH M8700 "The most powerful laptop computer" (Clevo P170EM)



Assembly/Buildout: 2X Quality Control - Increases Speed and Longevity



Microprocessors: Intel i7 Extreme i7-3920XM, 2.9GHz



CPU Thermal Compound: M-Tech Brand CPU Thermal Compound (CPU and GPU)



Memory: 32GB 4x8GB DDR3 - 1600MHx



Graphics: nVIDIA GeForce GTX 675M w/2GB GDDR5



Display: 17.3" 1920 x 1080 Full HD (16:9) LED Backlit Glare Type Display, Super-Wide Viewing Angles

Media Slot: Built-in 9-in-1 Flash Memory Reader



Primary Hard Drive: 250GB SATA 3 MLC Solid State Drive 60GB SATA 3 MLC Solid State Drive 510 Series



Secondary Hard Drive: 750GB/7200rpm 16MB Cache Buffer (SATA II 3GB/s)



Third Hard Drive: Optional - Third Hard Drive Option

RAID Configuration: Standard Configuration - No RAID - Single OS Partition



Optical Drive Unit: 6X Blu Ray Burner/Reader



Web Cam: Integrated 2 Megapixel Digital Video Camera



Networking/Modem: Ethernet Bigfoot Networks Killer Wireless-N 1103



Security Devices: Finger Print Reader



Share this post


Link to post
Share on other sites

I'd like to join too. I have a Sager 9570, 4930K,16Gb 1866MHz, 2x 780M, 2x330W Psu, 2x256Gb Samsung 840 Pro RAID 0 3DMark Vantage 55040 pg. 10 Benchmark thread.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

I own a sager np9150 with a 675mx. I have done basic cooling mods and de-badging of the system. looking to do some wraps or ssd upgrades. would love to hear from other with the same systems as me.

Share this post


Link to post
Share on other sites

w230st

4700mq

16gb 1600mhz ram

Samsung 1TB EVO

Plextor m5m 128gb x2

WIN7

SS Sensei Mouse

Prema bios -biggest step and advantage to take control of machine for raw power

Planning

Chipset cooling-? Gota source for some heatsinks

Vinyl keyboard (needs to be done)

Tons of modifications to the system and hardware for comp/harder gaming(parties and such)

Share this post


Link to post
Share on other sites

See signature--not playing with any BIOS mods til my warranty expires, but and penciling in a rebuild right after and another halfway from then to decommission.

Share this post


Link to post
Share on other sites

Add me to the roster! :o Pulled the trigger on my P570WM yesterday. I can't wait to immediately void the warranty with all kinds of BIOS mods and overclocking... lol. If only I had more than ten dollars to my name, I could actually get some games to go with it... :disturbed:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.