seefew Posted June 18, 2015 Share Posted June 18, 2015 Oh, guys, a little crawl every day keeps you young and agile and it's as good for your Joints. But toe training also :D Quote Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted June 18, 2015 Share Posted June 18, 2015 US$21 low profile Dell DA-2 cable for AKiTiO Thunder2This one has low profile PCIe power connectors. A slight price bump up to US$21. According to martinm0 at http://forum.techinferno.com/enclosures-adapters/9951-low-profile-pcie-connectors-discussion.html#post137104 the outer AKiTiO chassis does clear the PCIe power connectors. This product has been highlighted on the opening post of this thread.Akitio Egpu 8 Pin to 2 x PCI E 6 Pin Super Low Profile No Latch 1 x Barrel | eBay<A HREF=http://i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/K6gAAOSwl8NVgDm~/$_57.JPG><img width=400 src=http://i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/K6gAAOSwl8NVgDm~/$_57.JPG></A> 1 Quote Link to comment Share on other sites More sharing options...
martinm0 Posted June 18, 2015 Share Posted June 18, 2015 Thanks @Tech Inferno Fan for posting here too. Note to get the wires to fit, I snipped the zip ties and flattened the wires to the sides. Still close, but nothing is getting pinched or slit as long as you're not a brute about it I imagine. I think a shorter version for internal use might be good. The vendor on eBay will make anything you ask for it appears. Quote Link to comment Share on other sites More sharing options...
Macchione Posted June 21, 2015 Share Posted June 21, 2015 Hi all, I've been lurking for quite a while and have had to finally break down and make my first post! The fact that I haven't had to post yet is a testament to all the great information on this forum, thank you to everyone who has contributed. Anyway, I've ordered all the parts required for what will (hopefully) be a plug and play eGPU solution. These include: Akitio Thunder2, EVGA GTX960 (small form factor), Dell DA-2, and this adapter from eBay. My first question is pretty basic. I think I have everything figured out except how to power on the DA-2 using the paperclip trick. Can anyone give me a little walkthrough of this?EDIT: Apparently I posted two years ago as well...who knew. Quote Link to comment Share on other sites More sharing options...
Dschijn Posted June 21, 2015 Share Posted June 21, 2015 @Macchione: With that adapter the DA-2 will always be on, because it includes the paperclip trick! Quote Link to comment Share on other sites More sharing options...
Macchione Posted June 22, 2015 Share Posted June 22, 2015 @Macchione: With that adapter the DA-2 will always be on, because it includes the paperclip trick!Awesome! Thanks for the quick reply. Quote Link to comment Share on other sites More sharing options...
LukeHero Posted June 26, 2015 Share Posted June 26, 2015 Hey guys just wanted to share a photo of my cables. I went with the way Morv did it EDIT: My DA-2 just arrived a couple hours after my PCI cables did, just after I posted this, so extra pic added with DA-2 connected. Quote Link to comment Share on other sites More sharing options...
TheDeathEffect Posted June 28, 2015 Share Posted June 28, 2015 US$21 low profile Dell DA-2 cable for AKiTiO Thunder2This one has low profile PCIe power connectors. A slight price bump up to US$21. According to martinm0 at http://forum.techinferno.com/enclosures-adapters/9951-low-profile-pcie-connectors-discussion.html#post137104 the outer AKiTiO chassis does clear the PCIe power connectors. This product has been highlighted on the opening post of this thread. Akitio Egpu 8 Pin to 2 x PCI E 6 Pin Super Low Profile No Latch 1 x Barrel | eBay I was wondering if this would work with a PE4L system? EDIT: And another question- is it reasonable to get the 2x 6+2 pin version? Since 2 6pins are 150W (at 75W each) and the slot itself is another 75W, we're already looking at 225W which is close to the maximum the Dell DA-2 can provide. Quote Link to comment Share on other sites More sharing options...
JoshS0515 Posted July 1, 2015 Share Posted July 1, 2015 Can someone explain to me exactly what this is? http://www.ebay.com/itm/Akitio-eGPU-8-PIN-TO-2-x-PCI-E-6-PIN-super-low-profile-no-latch-1-x-BARREL-/261932428549?pt=LH_DefaultDomain_0&hash=item3cfc63ad05&afsrc=1&rmvSB=true&afsrc=1&rmvSB=trueIs this just the adapter at the end that you would still have to smolder to the DA-2 or is this a complete product that just can plug into your eGPU? Quote Link to comment Share on other sites More sharing options...
TheDeathEffect Posted July 1, 2015 Share Posted July 1, 2015 QuoteCan someone explain to me exactly what this is? http://www.ebay.com/itm/Akitio-eGPU-8-PIN-TO-2-x-PCI-E-6-PIN-super-low-profile-no-latch-1-x-BARREL-/261932428549?pt=LH_DefaultDomain_0&hash=item3cfc63ad05&afsrc=1&rmvSB=true&afsrc=1&rmvSB=trueIs this just the adapter at the end that you would still have to smolder to the DA-2 or is this a complete product that just can plug into your eGPU? Should just be a plug-and-play solution. The 8-pin end just plugs into the Dell DA-2, the DC barrel powers the adapter (Akitio or PE4L) and the 6-pin PCIe power connectors go to the graphics card. Quote Link to comment Share on other sites More sharing options...
JoshS0515 Posted July 1, 2015 Share Posted July 1, 2015 Should just be a plug-and-play solution. The 8-pin end just plugs into the Dell DA-2, the DC barrel powers the adapter (Akitio or PE4L) and the 6-pin PCIe power connectors go to the graphics card.WOW okay awesome. So really all you need with the Akitio model is to install the GPU into the AKitio buy the Dell Da-2 and the plug and play part and your done for a mac? That seems crazy easy. Quote Link to comment Share on other sites More sharing options...
TheDeathEffect Posted July 1, 2015 Share Posted July 1, 2015 WOW okay awesome. So really all you need with the Akitio model is to install the GPU into the AKitio buy the Dell Da-2 and the plug and play part and your done for a mac? That seems crazy easy.As far as hardware goes, this is pretty much all you need, aside from possibly needing to open up the Akitio box to allow for larger cards. Quote Link to comment Share on other sites More sharing options...
JoshS0515 Posted July 2, 2015 Share Posted July 2, 2015 Is the Dell DA-2 strong enough to power the new AMD Fury Mini or the Asus GeForce GTX970 Direct CU? http://www.amazon.com/Asus-GTX970-DCMOC-4GD5-ASUS-Graphics-Cards/dp/B00RL2SLAG/ref=sr_1_2?ie=UTF8&qid=1435840099&sr=8-2&keywords=asus+gtx+970+directcu+mini Quote Link to comment Share on other sites More sharing options...
juniordiscart Posted July 2, 2015 Share Posted July 2, 2015 I don't think the new AMD Fury X is a good candidate for the Dell DA-2. The Fury X has a TDP set at 275Watt, a bit too much for the Dell DA-2 to pull. If you want to use the Fury X, you're better off using a regular ATX PSU with a minimum of 500 Watt to get a good power efficiency. The DA-2 should be fine for the GTX970 you linked though. Quote Link to comment Share on other sites More sharing options...
Dschijn Posted July 2, 2015 Share Posted July 2, 2015 Is the Dell DA-2 strong enough to power the new AMD Fury Mini or the Asus GeForce GTX970 Direct CU? http://www.amazon.com/Asus-GTX970-DCMOC-4GD5-ASUS-Graphics-Cards/dp/B00RL2SLAG/ref=sr_1_2?ie=UTF8&qid=1435840099&sr=8-2&keywords=asus+gtx+970+directcu+miniFury X : No!ASUS 970 mini : Yes! But keep in mind that the ASUS is using 1x8-Pin PCIe power plug. Quote Link to comment Share on other sites More sharing options...
JoshS0515 Posted July 2, 2015 Share Posted July 2, 2015 Fury X : No!ASUS 970 mini : Yes! But keep in mind that the ASUS is using 1x8-Pin PCIe power plug.What effect does that have? Just that the traditional extension has 2? Quote Link to comment Share on other sites More sharing options...
Dschijn Posted July 2, 2015 Share Posted July 2, 2015 It depends what kind of PSU you want to use. With the Dell DA-2 and the eBay adapter, you will also need a 2x6-Pin -> 1x8-Pin adapter. Quote Link to comment Share on other sites More sharing options...
TheDeathEffect Posted July 3, 2015 Share Posted July 3, 2015 Bad news, just got that adapter thingy and the notching is incompatible with Dell DA-2 notching EDIT: It can still fit, but you really have to force it in PS I can confirm that this adapter will allow use of Dell DA-2 power supply with PE4L. Quote Link to comment Share on other sites More sharing options...
Dschijn Posted July 3, 2015 Share Posted July 3, 2015 That's because they use a 8-Pin PCIe plug on that cable and the 8-Pin pf the DA-2 is different. Still they fit each other with a bit of pressure Don't worry, that's the way it is supposed to be. Just make sure, that the row with the removed pin is connecting to the bottom row of the DA-2. Quote Link to comment Share on other sites More sharing options...
TryptoPhan Posted July 10, 2015 Share Posted July 10, 2015 Hey guys, My current eGPU setup: - ATX Corsair CX500M PSU - EVGA GTX 760 (170W TDP) - powered PCIe x16 riser The GPU requires 1x 6 pin + 1x 8 pin connectors and I'm not sure if the new setup I'm planning will safely provide that: New eGPU setup: - DA-2 PSU - EVGA GTX 760 (170W TDP) - 6pin Y splitter (1x male to 2x female) - 6pin to 2x6+2 splitter (got this from the PSU) - barrel mod So the GPU has 170W TDP, whereby 75W is provided directly from the PCIe slot and the remaining 95W is provided by 6 pin + 8 pin. However, the 6 pin splitter is only rated for 75W, so we are going slightly over. I found somewhere that in practice, the 6 pin is apparently able to provide way more, up to 150W, still not sure if it's safe over a long time. Is this going to be a problem? Probably not during light use but how about when gaming or other GPU heavy tasks? I made a super professional diagram to better illustrate the setup: Bonus question: I'm about to solder the 2x12v and 2xGND onto a barrel. - Can I solder both 12v wires together onto the + terminal as well as both GND together onto the - terminal? Or how would I go about this? Would really appreciate your input. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
martinm0 Posted July 11, 2015 Share Posted July 11, 2015 I would think you'll be fine. I'm running a Zotac GTX 970 with the same setup (though mine has 2x 6pin). Gaming has been working fine so far (granted Batman has been locked at 30 FPS so it's not straining the card that hard). But all has been well for me.And yes to the soldering. I think that is fine as well. 1 Quote Link to comment Share on other sites More sharing options...
Dschijn Posted July 11, 2015 Share Posted July 11, 2015 @TryptoPhan: The GPU doesn't need that much power that is any way to worry. Also is the DA-2 limiting the mac. amount of power so I would say that it is safe to use the 6-Pin y-splitter.Combining 2x12v and 2xground is no problem. Inside the PSUs it is already the same but splitted to separate wires later to spread the load. 1 Quote Link to comment Share on other sites More sharing options...
keymone Posted July 16, 2015 Share Posted July 16, 2015 hi LukeHero, am i right that what you have there is 2 6pin splitters into 2 6pin, one of which is cut off and a barrel plug is attached instead of 6pin head?so 2 of these - StarTech.com 15cm 6pin PCI Express Splitter Kabel: Amazon.de: Computer & Zubehörright? Quote Link to comment Share on other sites More sharing options...
Dschijn Posted July 19, 2015 Share Posted July 19, 2015 hi LukeHero, am i right that what you have there is 2 6pin splitters into 2 6pin, one of which is cut off and a barrel plug is attached instead of 6pin head?so 2 of these - StarTech.com 15cm 6pin PCI Express Splitter Kabel: Amazon.de: Computer & Zubehörright?Yes! 1 Quote Link to comment Share on other sites More sharing options...
keymone Posted July 21, 2015 Share Posted July 21, 2015 Yes!hi Dschijn, i just noticed that i by mistake only ordered single splitter, is it dangerous to mix Akitio psu with dell da-2 psu? thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.