Kommando Posted March 5, 2015 Share Posted March 5, 2015 I'm having issues with my P751ZM running Win 7 Professional. The bluetooth part of the installed Killer 1525 is not shown in the device manager, nor is any bluetooth function available. Tried different Killer Suites and Bluetooth drivers already, including uninstalling with Killercleaner. Nothing helps, there seems to be no bluetooth on this card... The WLAN part is working without issues.Now i heard that a newer bios may help. Before doing that i'd like to know which version is installed. Where can i see this correctly?Edit:Took a while but the issue is finished now: http://forum.notebookreview.com/threads/official-clevo-p75xzm-batman-sager-np9752-owner%C2%B4s-lounge-welcome-to-the-batcave.767105/page-242#post-9949697 Link to comment Share on other sites More sharing options...
jaybee83 Posted March 5, 2015 Share Posted March 5, 2015 ill look up my comparison post again if you like. the differences in gpu load and temps werent that big, but valley had a slight edge.edit: here u go - http://forum.notebookreview.com/threads/official-clevo-p75xzm-batman-sager-np9752-owner%C2%B4s-lounge-welcome-to-the-batcave.767105/page-176#post-9924318Sent from my Nexus 5 using Tapatalk Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2015 Share Posted March 7, 2015 thank you so much for a quick reply .. will do it now hey thanks alot.. i flashed the bios and works like a charm one question what software to use to overclock the gpu? thanks man / NVIDIA Inspector works best for me. Hi all, I just got a Clevo 670SG and I'm having random fps drops ingame, and others seem to be having the same problem.Someone said that updating the BIOS (stock) solved it but afterwards the CPU maxed out at 2.8Ghz rather than 3.5GHz? Or should I use Prema? (i know it will void warranty) Well, the Mod would allow you to raise TDP to also get the CPU Turbo back on track... I'm having issues with my P751ZM running Win 7 Professional. The bluetooth part of the installed Killer 1525 is not shown in the device manager, nor is any bluetooth function available. Tried different Killer Suites and Bluetooth drivers already, including uninstalling with Killercleaner. Nothing helps, there seems to be no bluetooth on this card... The WLAN part is working without issues.Now i heard that a newer bios may help. Before doing that i'd like to know which version is installed. Where can i see this correctly? Keep F2 pressed right after boot to enter the BIOS setup where the version numbers are displayed. If you are running Windows in UEFI then it may sometimes boot too fast to be able to enter BIOS, then it usually works best to use F2 during a reboot. Link to comment Share on other sites More sharing options...
Kommando Posted March 7, 2015 Share Posted March 7, 2015 Keep F2 pressed right after boot. If you are running Windows in UEFI then it maysometimes boot too fast to be able to enter BIOS, then it usually works best to use F2 during a reboot.Thank you! I updated the BIOS yesterday from 1.03.06/1.03.03 to 1.03.07/1.03.04(stock version) and it may have been of help. I'm not exactly sure because the bluetooth showed up hours later, but who knows...Next one will be your tweaked BIOS. I'm just waiting two weeks (14 day money back guarantee) before doing this. Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 7, 2015 Share Posted March 7, 2015 i am on w230ss my installed bios version is showing as 4.6.5 anyone can guide me how to backup my mobo bios ? Link to comment Share on other sites More sharing options...
mighty Posted March 7, 2015 Share Posted March 7, 2015 Hey prema, are you still working on a new bios-mod for the P170SM (with native 9x0M support)? If so, is there an ETA or is there anything I could help you with (e.g. a lil donation )? cheers 1 Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 8, 2015 Share Posted March 8, 2015 Blank screen after flashing ws230 v1.1 on bios v4.5.6. Waiting for 3 hours but system wont even show boot menu. Need help as it just purchased laptop yesterday ;( Link to comment Share on other sites More sharing options...
zymphad Posted March 8, 2015 Share Posted March 8, 2015 Bricked BIOS is bricked BIOS, if you can't start it you can't fix. Have you done this before? Read the directions thoroughly? Make sure you flashed the right BIOS? Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 8, 2015 Share Posted March 8, 2015 Bricked BIOS is bricked BIOS, if you can't start it you can't fix. Have you done this before? Read the directions thoroughly? Make sure you flashed the right BIOS?I followed the instructions in reader doc. My system is pcspecialist ( clevo w230ss) bios ver 4.5.6. Everything flashed fine when everything done it shut down.I removed battery for one minute when powered up blank screen. Pressing F2 or any other key doesn't do any thing only back-lit key working fine. Even connecting with external monitor not showing any thing. One thing my system is FHD and monitor I'm using is very old not even hd when I connect cable it shows going in sleep mode. I've flashed bios many times but this is my first time flashing any molded bios. Purchased system yesterday. Any suggestions pls? Link to comment Share on other sites More sharing options...
zymphad Posted March 8, 2015 Share Posted March 8, 2015 It takes a while to boot up... Did you wait for the BIOS to boot after flashing? Guessing not. Try resetting it and when boot stop spamming F2 and use some patience. Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 8, 2015 Share Posted March 8, 2015 It takes a while to boot up... Did you wait for the BIOS to boot after flashing? Guessing not. Try resetting it and when boot stop spamming F2 and use some patience.Waited for nearly 20 min after shutdown and still waiting. Approx how long should ic wait? Link to comment Share on other sites More sharing options...
Ethrem Posted March 8, 2015 Share Posted March 8, 2015 I followed the instructions in reader doc. My system is pcspecialist ( clevo w230ss) bios ver 4.5.6. Everything flashed fine when everything done it shut down.I removed battery for one minute when powered up blank screen. Pressing F2 or any other key doesn't do any thing only back-lit key working fine. Even connecting with external monitor not showing any thing. One thing my system is FHD and monitor I'm using is very old not even hd when I connect cable it shows going in sleep mode. I've flashed bios many times but this is my first time flashing any molded bios. Purchased system yesterday. Any suggestions pls?Follow instructions for recovery - https://biosmods.wordpress.com/bios-recovery/If the machine is not shutting off and has a black screen it can be recovered. Sent from my Nexus 6 using Tapatalk 1 Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 8, 2015 Share Posted March 8, 2015 Follow instructions for recovery - https://biosmods.wordpress.com/bios-recovery/If the machine is not shutting off and has a black screen it can be recovered. Sent from my Nexus 6 using Tapatalk Excellent and worked perfectly for me. created RMA just an hr back . so had to cancel it now 1 Link to comment Share on other sites More sharing options...
Ethrem Posted March 8, 2015 Share Posted March 8, 2015 Excellent and worked perfectly for me. created RMA just an hr back . so had to cancel it now Glad it worked. They usually charge 3 or 400 bucks if you send the machine back due to a bad BIOS flash. Sent from my Nexus 6 using Tapatalk Link to comment Share on other sites More sharing options...
maikeruxx2 Posted March 9, 2015 Share Posted March 9, 2015 I have a sager np9772 with a 970m and was wondering which mod to use if there is one available? o.o Link to comment Share on other sites More sharing options...
zymphad Posted March 9, 2015 Share Posted March 9, 2015 Awesome problem solving Link to comment Share on other sites More sharing options...
monbarbeche Posted March 9, 2015 Share Posted March 9, 2015 hey prema? do u know where i could find an instruction on flashing vbios? tia Link to comment Share on other sites More sharing options...
jaybee83 Posted March 9, 2015 Share Posted March 9, 2015 on his website Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 9, 2015 Share Posted March 9, 2015 Glad it worked. They usually charge 3 or 400 bucks if you send the machine back due to a bad BIOS flash. Sent from my Nexus 6 using TapatalkThanks for help again. Now how do I flash back original pcspecialist bios in case of warranty claim in future on there website latest bios is in. img format? Link to comment Share on other sites More sharing options...
Kommando Posted March 9, 2015 Share Posted March 9, 2015 Don't know if PC Specialist modified the BIOS on its own. But the stock BIOS-Versions are on Premas Website. 1 Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 10, 2015 Share Posted March 10, 2015 Follow instructions for recovery - https://biosmods.wordpress.com/bios-recovery/If the machine is not shutting off and has a black screen it can be recovered. Sent from my Nexus 6 using TapatalkThanks my bios were recoverd using stock bios from this site however today i stupidly installed orginal bios from PCspecialist website.system again got stuck on boot screen so i tried earlier trick however this time it didn't work. Bios download from vendor site are in .Img format bit iso or .romr format. Pools help again thanks Link to comment Share on other sites More sharing options...
Guest Posted March 10, 2015 Share Posted March 10, 2015 IMG is a disc image. Did you burn that to a CD? Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 10, 2015 Share Posted March 10, 2015 IMG is a disc image. Did you burn that to a CD?Yes ofc.as per instructions img could be burned too usb. So I burned that to 32gb usb stick usung recommend img burner in readme doc. There was no error during flash process. Link to comment Share on other sites More sharing options...
Guest Posted March 10, 2015 Share Posted March 10, 2015 Man your system is weird, have the same one and flashed it like 50 times without a single hick-up...If the flash completed successfully a CMOS reset should be enough to restore it.Please PM me that image so I can check the actual BIOS and EC versions that where flashed. Link to comment Share on other sites More sharing options...
rehanraza80 Posted March 10, 2015 Share Posted March 10, 2015 I don't want to send my laptop for RMA and wait for another couple of weeks.Thanks- - - Updated - - -I'll send img file shortlyMan your system is weird, have the same one and flashed it like 50 times without a single hick-up...If the flash completed successfully a CMOS reset should be enough to restore it.Please PM me that image so I can check the actual BIOS and EC versions that where flashed.Pls check your pm. img file send. I have already done cmos reset many time Link to comment Share on other sites More sharing options...
Recommended Posts