This topic is now closed to further replies.
In this thread you can post your requests for Lenovo ThinkPad T450s.
If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or already upgraded Display and after that can't adjust screen brightness, then you can post your request in this thread.
For creating bios backup and to flash bios mod, you must use any SPI programmer (like CH341A programmer) and a SOIC8/SOP8 test clip!
Just dump your Bios using any SPI programmer (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
SOIC8/SOP8 test clip:
How to use it:
Also, you can search on YouTube a lot of guide for CH341a.
So on occasion I host gaming nights over at my house, and usually end up hooking my laptop up to a big TV so me and a couple friends can all play all kinds of multiplayer games (either emulated or off of steam).
But I was recently thinking that it would be fun to get a projector set up, so that we could play on a huge blank wall in my living room.
With that being said: I'm new to purchasing projectors, so I'm not familiar with what kinds of features/specifications I should be looking for (and I'd like to keep the cost down if it's possible).
So I was wondering if anyone has any advice for me on what to look for in features/specifications, affordable places to buy from, or just general info on what I'm trying to do.
Any help would be super appreciated!
I have an M18x R1 running WIN7 PRO NV580M SLI, however second card was removed due to possible issue. I am running Ahmeds Unlocked BIOS A04. Since I removed the second card I am getting a power cycling issue, the battery charges fine and the system runs fine off AC power but when connected to AC with the battery in and as soon as the battery reaches 100% it starts cycling between on battery power and on AC power.
I have performed a system restore. Restored to stock BIOS then back to unlocked BIOS. Pulled battery connected AC and then put battery back in when windows boots. Ran a power drain by holding the power button three times. Booted on battery alone, then booted on power alone. Nothing has worked.
I am hoping someone has run into this issue and can help me. This is a new system to me and has some differences of the M15x I used to have.
Hi guys, I need some help from you guys if you wouldn't mind. I'm useless
I7 2720qm @2.2ghz
1x HDD 500gb
1x HDD 300gb
Nvidia GTX 650 Ti BOOST
EXP GDC BEAST 8.5c
DIY Setup 1.3
DELL 220w PSU
After a lot of messing around I have managed to get this egpu to work when downgrading to 2gb, Which makes me think I just need to change my TOLUD to get it to work. I have read and tried to make a successful DSDT file however I don't really know what I'm doing with these driver edits and haven't been able to get it to work particularly the error fixing on compiling the dsdt.
However When I did have it working on 2gb ram. I ran heaven Bench, The GTX 650 under load makes strange noises and crashes the display driver multiple times. Could any of you more knowledgeable individuals give me a hand please Thanks