Jackscagnetti Posted October 13, 2012 Share Posted October 13, 2012 how do you know when your HDD is going or not?CrystalDiskInfo says it is good with no percentage but it recently was making noise when moving files Link to comment Share on other sites More sharing options...
Founder Brian Posted October 13, 2012 Founder Share Posted October 13, 2012 If it's mechanical you might hear grinding before the platters crash.Sent from my GT-N7000 Link to comment Share on other sites More sharing options...
Nospheratu Posted October 13, 2012 Share Posted October 13, 2012 Try one of the Disk Utilities like SeaTools and check the S.M.A.R.T status. Also you can try running all the long diagnostic tests overnight, I think it includes a complete sector scan. Bear in mind that this is going to give your drive a good workout so in the off chance it is faulty I would back up anything you need before running the tests. I'm not sure if it can detect early signs of mechanical failure though, I think the tests are more focused on the platters. Link to comment Share on other sites More sharing options...
mw86 Posted October 13, 2012 Share Posted October 13, 2012 Yeah much agreed asdume if its not the plain hdd click from moving back and forth on platter that its a physical problem. I have one in that condition and no telling when it will go. Upon attaching to my comp random do i get clicking. So backup all important data and i suggest not even using it till you backed up whats important. As mentioned a hard drive scan can actually cause the physical problem to fully break. Paranoid Galaxy S3 on Tapatalk 2 Link to comment Share on other sites More sharing options...
gordon1986 Posted October 22, 2012 Share Posted October 22, 2012 I use this for windows, its free:ReStoring Data SMART Data software Link to comment Share on other sites More sharing options...
cbber Posted October 25, 2012 Share Posted October 25, 2012 try HDTuneHD Tune website Link to comment Share on other sites More sharing options...
levanworth Posted November 28, 2012 Share Posted November 28, 2012 When you hear the sound of needle crashing to the plate roughly and repeatedly, it's the time...Mechanical failure may not report itself in bad sectors. Link to comment Share on other sites More sharing options...
i b ben Posted December 6, 2012 Share Posted December 6, 2012 I'm not really following either, or you trying to figure out whether its ''on''? Like other have said before me mechanical drives have moving parts, thus are audible. An ssd however aint. If that's the case use a program like Hdtune. Link to comment Share on other sites More sharing options...
stevoz Posted December 8, 2012 Share Posted December 8, 2012 Noisy might not be a physical problem.Its possible that the drive has just got too fagmented and so the drive is having to read all over the place to read the files, which results in a lot of noise.Also check your case, there isn't anything that is making it vibrate. Try pushing down fairly hard on the top of the case and see if the noise returns to a normal level. Link to comment Share on other sites More sharing options...
jimmyd1321 Posted January 13, 2013 Share Posted January 13, 2013 Back up everything you need. Then Defrag, then use DBAN. Dban will format it and wipe all the information, if it gives you any error during the process and halts, that means there is a physical problem, if it formats and wipes the hard drive clean, the hard drive is okay. Link to comment Share on other sites More sharing options...
unreal25 Posted January 14, 2013 Share Posted January 14, 2013 Keep in mind that if the HD is making noise, its also possible that there's some power savings active so the HD might be turning on and off (for example, if its a secondary drive); but that's probably not happening if it clicks also during file transfer. In this case you can check this option: Link to comment Share on other sites More sharing options...
Sharadeos Posted January 26, 2013 Share Posted January 26, 2013 I would like to share a very recent encounter with a failing hard drive. The drive was being unresponsive for 30 seconds or so, then it would resume whatever it was doing. Some files were then removed which freed up space and made it seem stable again. If you see a symptom like this, quickly backup all your data before its too late. Link to comment Share on other sites More sharing options...
w3b1x Posted April 9, 2013 Share Posted April 9, 2013 I had two or three hard drives crashing lately, one of them had that "typical" screaking sound. That might be a hint, but it's not always the case. Link to comment Share on other sites More sharing options...
lucktle Posted April 12, 2013 Share Posted April 12, 2013 I had a hard drive which randomly started to load really slow. It also failed a few SMART tests, no idea what caused it. There's no weird noises or anything from it, nor has it been dropped, and was relatively recent, less than a year. Link to comment Share on other sites More sharing options...
Recommended Posts