shankdashiv Posted May 8, 2016 Share Posted May 8, 2016 On 3/19/2016 at 11:59 AM, Klem said: Just post here your vbios. Think you can do HP k4000m. GK104.rom Quote Link to comment Share on other sites More sharing options...
shankdashiv Posted May 8, 2016 Share Posted May 8, 2016 On 3/14/2016 at 9:18 AM, warrimonk said: This one, the K4000M OC one, just with a bit more voltage pushed to it, maybe a +50mv one and a +75mv one ? I'm not too sure about what is acceptable on Quadro cards. Thanks. Dell K4000m - 80.04.33.00.34_'OC edition'.zip What stable clocks did you end up with man? Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 8, 2016 Bios Modder Share Posted May 8, 2016 6 hours ago, shankdashiv said: Think you can do HP k4000m. GK104.rom Check your PM. Quote Link to comment Share on other sites More sharing options...
grzybolevsky Posted May 15, 2016 Share Posted May 15, 2016 I've a problem, i modified my bios with Y580 unlocked bios from this forum and I have an problems with temperature. Can i back to lenovo bios? Quote Link to comment Share on other sites More sharing options...
fjtroper Posted May 23, 2016 Share Posted May 23, 2016 Thank you! Quote Link to comment Share on other sites More sharing options...
F4v0r3D Posted June 1, 2016 Share Posted June 1, 2016 (edited) @Klem Hi Klem and hi everybody else, in July 2015 I got a modified BIOS from Klem which enabled overclocking. It worked perfectly till last week. Since I installed a 500GB mSata SSD (Samsung 850 EVO) overclocking isn't enabled anymore with tools like EVGA Precision X. I just flashed the BIOS from Klem again but unfortunately this did not help. Has anybody an idea what the problem might be? Kind regards and thanks in advance! Erik EDIT: Also I did a fresh install of win7 on the new SSD. Edited June 1, 2016 by F4v0r3D Quote Link to comment Share on other sites More sharing options...
Flyview Posted June 2, 2016 Share Posted June 2, 2016 On 2/10/2014 at 0:02 PM, Astelith said: The i7 620M it't not that bad, I can play almost everything on ultra (2048 x 1152 on Dell 23") with 40fps or more... at 1000 core 1v / 2900 mem the power draw is around 110/120W ...and for that I love the 620M ! But now I've found a good 920xm so let's see - - - Updated - - - I recover the card soldering a new vbios chip. Hey I know I'm digging this up from 2 years ago, but I'm looking for a modded nVidia 620m vbios. I'm hoping to undervolt it as this card just gets too damn hot in my Asus UX32VD. Did you ever have a custom vbios for it? The only "trick" I've managed so far is to disable nVidia PowerMizer with PowerMizer Manager app, set it in to low performance mode, and then up the clocks in that mode back to stock clocks. This allow me to run at 0.925v instead of 0.975v but it's STILL really hot. It'll reach 85c+ under load at 24c ambient. This is in combination with an i7 3517U with eliminated TDP for turbo power boost with Intel XTU. The problem is they share a heat pipe and heat eac hother up. Would anyone be so kind as to build me a modded vbios or point me to some documentation on doing this myself? I can post the original. Thanks! Quote Link to comment Share on other sites More sharing options...
Khenglish Posted June 2, 2016 Share Posted June 2, 2016 On that laptop the vbios will be included in the system bios. You will need to decompress your bios so that you can replace the vbios module within it. Phoenixtool is a good program for that. As for the bios mod, the 620m is a fermi core. There's a Fermi Bios Editor, but that refuses to work with mobile gpus. I'm not sure how you would drop the voltage once the vbios is extracted. 1 Quote Link to comment Share on other sites More sharing options...
Flyview Posted June 2, 2016 Share Posted June 2, 2016 (edited) 2 hours ago, Khenglish said: On that laptop the vbios will be included in the system bios. You will need to decompress your bios so that you can replace the vbios module within it. Phoenixtool is a good program for that. As for the bios mod, the 620m is a fermi core. There's a Fermi Bios Editor, but that refuses to work with mobile gpus. I'm not sure how you would drop the voltage once the vbios is extracted. Thanks. I'll work on extracting the vbios for now. I know I decompressed the entire bios before trying to unlock the CPU. So has no one has been able to edit a vbios for a Fermi mobile card? That's not good news! Edited June 2, 2016 by Flyview Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted June 2, 2016 Bios Modder Share Posted June 2, 2016 17 hours ago, F4v0r3D said: @Klem Hi Klem and hi everybody else, in July 2015 I got a modified BIOS from Klem which enabled overclocking. It worked perfectly till last week. Since I installed a 500GB mSata SSD (Samsung 850 EVO) overclocking isn't enabled anymore with tools like EVGA Precision X. I just flashed the BIOS from Klem again but unfortunately this did not help. Has anybody an idea what the problem might be? Kind regards and thanks in advance! Erik EDIT: Also I did a fresh install of win7 on the new SSD. 1. Completely uninstall MSI Afterburner with all settings. Reboot laptop. 2. Completely uninstall EVGA Precision X with all settings. Reboot laptop. 3. Download the program DDU (NVIDIA drivers uninstaller), run it and completely uninstall NVIDIA drivers. 4. Download and install NVIDIA drivers version 359.06 5. Reboot laptop. 6. Go in bios setup menu and on the last page "Save and Exit" set "Default Settings", then F10, then Enter. 7. Install NVIDIA Inspector and use it for overclock. Quote Link to comment Share on other sites More sharing options...
F4v0r3D Posted June 2, 2016 Share Posted June 2, 2016 4 hours ago, Klem said: 1. Completely uninstall MSI Afterburner with all settings. Reboot laptop. 2. Completely uninstall EVGA Precision X with all settings. Reboot laptop. 3. Download the program DDU (NVIDIA drivers uninstaller), run it and completely uninstall NVIDIA drivers. 4. Download and install NVIDIA drivers version 359.06 5. Reboot laptop. 6. Go in bios setup menu and on the last page "Save and Exit" set "Default Settings", then F10, then Enter. 7. Install NVIDIA Inspector and use it for overclock. Hi Klem, thanks for your reply. I just figured out that MSI afterburner works fine but EVGA does not, even after reinstallation. As long as there won't be any further problems I will leave it as it is and use MSI afterburner for now. If there are more problems arising I will use your Explanation. Thank you for your help! Quote Link to comment Share on other sites More sharing options...
Proxy Posted June 6, 2016 Share Posted June 6, 2016 pls unlock me i want to download the file pls Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted June 6, 2016 Bios Modder Share Posted June 6, 2016 3 hours ago, Proxy said: pls unlock me i want to download the file pls Just read "User account promotions": https://www.techinferno.com/index.php?/announcement/4-user-account-promotions-please-read/ Quote Link to comment Share on other sites More sharing options...
UsedToLosing Posted June 11, 2016 Share Posted June 11, 2016 I'm running a Clevo p157SM with a GTX770m. I didn't see a bios specifically for this card, should I just use the NVIDIA 770M OC edition bios? Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted June 12, 2016 Bios Modder Share Posted June 12, 2016 Just post here your vbios. Quote Link to comment Share on other sites More sharing options...
Bloetschkopf Posted June 12, 2016 Share Posted June 12, 2016 Hello I have a GTX 280M,but MSI have only Vbios for GTX 285M. This Clocks are to high for my Card. I tried to change with Nibitor,but the Clockrates are locked. Could You unlock this for me or change the Values to 600/1400/900. Maybe the Card will start without artefacts in my MS-16F1. GTX285MS.rar Quote Link to comment Share on other sites More sharing options...
Ferhat Posted June 12, 2016 Share Posted June 12, 2016 Hey there, is there something to do for my GTX 760M inside a Acer V3-772G? Any help would be really nice! Thanks GK106.rom Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted June 12, 2016 Bios Modder Share Posted June 12, 2016 5 hours ago, Bloetschkopf said: Hello I have a GTX 280M,but MSI have only Vbios for GTX 285M. This Clocks are to high for my Card. I tried to change with Nibitor,but the Clockrates are locked. Could You unlock this for me or change the Values to 600/1400/900. Maybe the Card will start without artefacts in my MS-16F1. GTX285MS.rar This is for you. GTX285MS.rar Quote Link to comment Share on other sites More sharing options...
Flyview Posted June 12, 2016 Share Posted June 12, 2016 On 6/2/2016 at 0:06 AM, Khenglish said: On that laptop the vbios will be included in the system bios. You will need to decompress your bios so that you can replace the vbios module within it. Phoenixtool is a good program for that. As for the bios mod, the 620m is a fermi core. There's a Fermi Bios Editor, but that refuses to work with mobile gpus. I'm not sure how you would drop the voltage once the vbios is extracted. On 6/2/2016 at 2:15 AM, Flyview said: Thanks. I'll work on extracting the vbios for now. I know I decompressed the entire bios before trying to unlock the CPU. So has no one has been able to edit a vbios for a Fermi mobile card? That's not good news! Alright so I decompressed my BIOS with PhoenixTool from MyDigitalLife forum. Now what, how can I tell which of these files is the vBIOS? Thanks for the guidance! Quote Link to comment Share on other sites More sharing options...
Bloetschkopf Posted June 12, 2016 Share Posted June 12, 2016 4 hours ago, Klem said: This is for you. GTX285MS.rar Thank You very much. Quote Link to comment Share on other sites More sharing options...
smiteom Posted June 16, 2016 Share Posted June 16, 2016 Thanks for this Quote Link to comment Share on other sites More sharing options...
korndogg Posted June 17, 2016 Share Posted June 17, 2016 (edited) Other than the fact that mine is not unlocked, what is the difference between the K4000m bios that is already posted in this thread and mine? Just curious because I really want to push this gpu to the max but don't want to mess it up by flashing the wrong bios. This was pulled off of my Dell card. It is almost twice the size of the one that is posted as well. Here is mine. I appreciate any help. k4000m.rom Edit: Never mind, I went back in the thread and saw that it would be fine to use the smaller bios. I have successfully flashed my K4000m and am now sitting at 1050mhz core and 2000mhz memory clocks! I only hit 80c max after gaming for several hours straight with those settings! I would still like to know what the difference is between the two bioses other than my stock bios being newer. Anyways thank you so much for the work you are doing. The only other thing I could ask is for a tutorial on how to edit the bios for myself, just out of curiosity. Edited June 19, 2016 by korndogg Quote Link to comment Share on other sites More sharing options...
ollithehub Posted June 28, 2016 Share Posted June 28, 2016 Is it possible to unlock my bios thanks a lot GTX 870MOrg .rom Quote Link to comment Share on other sites More sharing options...
alternal_steam Posted June 28, 2016 Share Posted June 28, 2016 (edited) I can't download v-bios pack from attachments. Need 5 posts on this forum. I need a Dell Quadro K4000M Unlocked vbios. I attached my current vbios of K4000M. Can someone unlock it plz? GK104.rom Edited June 28, 2016 by alternal_steam Quote Link to comment Share on other sites More sharing options...
ollithehub Posted June 29, 2016 Share Posted June 29, 2016 19 hours ago, ollithehub said: Is it possible to unlock my bios thanks a lot GTX 870MOrg .rom Please help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.