I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
I am the owner of a HP elitbook 8770W, an old but still very decent notebook.
I've upgraded the GPU several times , first with a GTX 970M and a while later with a GTX 1070 mobile.
I've bought those cards from pretty reliable sources (a seller on Ali I know pretty well) and I knew beforehand that the cards were compatible with my 8770w.
Unfortunately, my 1070 broke down due to heating issues.
Now I can get my hands on a Quadro P5200. The original ones don't have a EEPROM chip soldered on the board, and rely on the notebook VBIOS.
However, the one I want has a BIOS chip soldered on the board with a HP max-q bios, which would be perfect for me.
Well, if it's compatible of course.
The seller cannot give me a statisfactory answer to that and I'm not sure they are willing to refund me if this is not the case.
Now on to my concrete questions:
Does the build-in notebook VBIOS matter if there is a chip with a bios on the mxm card itself? If it does matter, since my notebook does recognize other pascal cards like the 1070 and 1080, is it wild to assume that a P5200 will also be recognized? They all seem to have a 86.04.x.x.x BIOS. Is there any way to check the notebook VBIOS compatibility against the one on the card?
Thank you in advance!
Hello, I've got a Quadro M2200 (GPU: GM206GL-A Revision A1, and MxM 3.0a Maxwell card) with the following bios: 84.06.76.00.1C
I've read that this card is very similar to the GTX 965m, but that it has been underclocked considerably. It seems to be a good candidate for unlocking since I hardly see the temperature exceed 70C as-is. I'm requesting help with this - I'm not sure if it's possible to simply flash the vbios from a Dell GTX 965m (MxM 3.0a) or if some type of edit of the card's current vbios would do the trick. I'm hoping someone could help me out with the specifics of doing such an edit if that's the case.
I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
Hey everyone! After lots of searching it looks like this is the go-to place for laptop mods online, so I figured this would be the best place to ask something like this.
I picked up a Dell E6530 for basically scrap value, and I love the thing. Runs Xubuntu great, battery is halfway decent, and I can play 99% of the games I own on it. My friend on the other hand picked up an E6440 with its silver-ish finish along the back. As much as I love my 6530 I've gotta say, that thing looks great.
To get to the point now, I was wondering if it's possible for me to polish the top of the lid on my 6530 to have a more silver finish like that (or maybe even a mirror finish if I sand it down with a fine enough grit). Really what I want to know is if the dark grey part of the lid is actually metal. I can't seem to get a definitive answer online, and I tried the magnet test on it and it wasn't magnetic at all. This doesn't necessarily mean it's not metal though, as aluminum isn't magnetic but is obviously a sandable/polishable metal. One source said the laptop has anodized aluminum parts on it, but they didn't specify whether it was something internal or external.
Can anyone here provide me some insight? If the grey part is definitely a metal and not a plastic, I think I'm gonna give it a try. As stated before I got this thing for scrap value, so if in the end it doesn't work out I'm not gonna cry over it or anything. Still though, I'd rather not run into this blind. If this is indeed possible though and I can accomplish what I want with a decent looking result, I'll post up some pictures with the method I used for others to do as well.
Thanks in advance!