Jump to content
EwinRacing Flash Series Gaming Chairs
zex4

Clevo P775TM1-G old MXM3.0B Support !

Recommended Posts

Hey everyone

 

After notebookreview was gone (RIP) I believe that I am in the right hands here..

 

I have one gaming clevo P775TM1-G with original i7-8700 and gtx 1060 (Latest Unlocked stock bios) more then two years now...
only what i changed was the display to 1080p 60hz non Gsynch time ago for better color representation....
but unfortunately the graphics card is dying now...could not find any cheap for now but i have almost new clevo non Gsynch gtx 970m MXM3.0B 6gb on my hands....
would use the 970M for now as lightweight gamer and creator....The card itself  fitted well but of course the heatsink not....luckily i found a cheap (35€) Clevo P775DM heatsink in good condition that fitted perfectly....

 

The clevo started into bios and the 970M was detected like the 1060 so i tought everything was fine until i getting blackscreen after bios :(
i can hear that he boots to login screen...i can hear my custom startup sound...but that was all..of course i unistalled the drivers from 1060

before and the panel i have is also non gsynch so i tought it should work otherwise i need a different bios or vbios i think :(

 

would be glad if someone can help me out of this :)

 

Best regards

 

 

Edited by zex4

Share this post


Link to post
Share on other sites
59 minutes ago, zex4 said:

Hey everyone

 

After notebookreview was gone (RIP) I believe that I am in the right hands here..

 

I have one gaming clevo P775TM1-G with original i7-8700 and gtx 1060 (Latest Unlocked stock bios) more then two years now...
only what i changed was the display to 1080p 60hz non Gsynch time ago for better color representation....
but unfortunately the graphics card is dying now...could not find any cheap for now but i have almost new clevo non Gsynch gtx 970m MXM3.0B 6gb on my hands....
would use the 970M for now as lightweight gamer and creator....The card itself  fitted well but of course the heatsink not....luckily i found a cheap (35€) Clevo P775DM heatsink in good condition that fitted perfectly....

 

The clevo started into bios and the 970M was detected like the 1060 so i tought everything was fine until i getting blackscreen after bios :(
i can hear that he boots to login screen...i can hear my custom startup sound...but that was all..of course i unistalled the drivers from 1060

before and the panel i have is also non gsynch so i tought it should work otherwise i need a different bios or vbios i think :(

 

would be glad if someone can help me out of this :)

 

Best regards

 

 

Hi!

Try go in bios setup menu, and set to "Default Settings", then try to connect external display or TV via HDMI, and then try to flash another vBIOS (for non G-sync gtx 970m 6gb).

Share this post


Link to post
Share on other sites

hey klem thanks for respond

 

actually my bios is alrdy on default settings its just unlocked but i will do that again...
i can acces the card on my multimedia pc with eurocomms mxm adapter...so wich vbios exactly should i flash ?

some infos about the card..bdw as far i know the card comes alrdy from a clevo p series....

DeviceId: 10DE 13D8 - 1558 7502

Bios Ver 84.04.67.00.08

Info Sticker: N16E GT V2.1 6G 6-77 P15SL DA2 T - VB:84.04.G7.00.00

Edited by zex4

Share this post


Link to post
Share on other sites

Hi,

 

Screen me GPU-Z info please i look for you if possible command for flash with usb stick.

 

You have backup original BIOS after unlocked your card ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Zauih840
      Hello, as the title states, I would be very happy if someone could give me the link to the mod, apart from that, what version should I install?, as I've seen that some models have v1 and v2.
      My other questions are: what do I have to do to install a new GPU?, (9xx series)
      And what mods do I have to use to have a 10x0 series (and which are compatible).
      I have the Clevo P150SM(model)/P150SM-A(product code) (2 models on the sticker) with stock bios (it says copyright 2012, so I guess it's the 1st version) with a 4710MQ and 870M.
       
      I would be very pleased if someone could hand me the link.
      Many thanks in advance.
    • By AlanP
      Hi All
       
      I've been searching all over the internet and these forums in particular and I just can't seem to get any answers regarding GPU upgrades for the Clevo P150HM. Neither can I get any real info on the difference between the HM and the EM model - the EM seems to be the much more talked about model.
       
      Anyway, my current GTX 580M is causing a black screen very occasionally and I decided to purchase a used GTX 980M (N16E-GX-A1) from aliexpress as a replacement.
      The seller isn't giving me much information and I am unsure if they've flashed the vbios on this card themselves, regardless of that I cannot seem to find a custom BIOS for this laptop either, the closest I found is P150EM_17_11_PM_v2 which is obviously for a EM not a HM model, again I don't know much about these two models and if attempting a flash with that BIOS will brick my laptop.
       
      The 980M is the correct form factor, it fits in perfectly and even warms up when I turn the laptop on, I can see the POST screen display but then it simply maxes the fans and beeps out until it shuts down. It would seem to be a pretty clear indication of incompatibility.
       
      Model: Clevo P150HM
      MB Series: P150HMx
      BIOS Revision: 1.01.14
      KBC/EC Firmware Revision: 1.00.12
      Another version number listed (not sure for what): 2.10.1208
       
      I understand this is both an old subject and an even older laptop, but I would be extremely thankful for any help available and I am willing to drill down to create my own custom BIOS if necessary but I just need a point in the right direction.
       
      Failing all that, its not the end of the world as they've already agreed to a return and refund if I can't figure this out.
       
      Thank you.
    • By iamconstant
      Hello, I have bought an empty case and assembled parts of Clevo P775DM1. Basically the laptop had no display or MXM Gpu or CPU. For test case I had a CPU lying around G3900 and put it in. I also have mxm gtx 965m Clevo card. I also have installed screen from alienware laptop 2k resolution 120hz. Now the problems.
      1) The laptop boots without a hastle. But as the nvidia drivers load the screen goes black and stays like that. At first I thought the GPU was dead but the external screen worked. Then I though maybe there is a problem with GPU not being recognized or something. Downloaded GPU-Z and every sensor is working fine. I tried saving vbios file and suddenly screen turned on. It probably disconnected the GPU and reconnected it again and as long as the laptop is on, GPU works without a problem. But if I restart it, the laptop screen turns black after boot and external works fine. That's the first problem.
      2) The second one is with Ram and I don't exactly understand the problem. I have 2x8GB rams 2133. single channel works without a problem, but when I try to use both of them the laptop does not boot at all. Won't start fans just blue led keyboard lights up. in single channel both rams work with no problem. And I've tried both slots, since the laptop has 4 slots. Still not working. If you can help with any of the problems, it will be much appreciated.
       
      p.s. I have recently bought the laptop and haven't really figured out anything around it. if you have any extra pointers/bios mods I'd really appreciate it as well.
    • By Onehit
      I've been scouring the internet in search of anything regarding an updated bios for my Clevo P170SM. I have found many mentions of Prema Bios mods on various websites, but good luck trying to find actual download links. They all seem to vanish or have dead links. Wayback Machine doesn't help either and I was only able to find stock Clevo bios as early as 2015 via the WayBack Machine. If anybody has an updates Prema Bios or some other unlocked bios file for the P170SM, that would be fantastic! Otherwise, I might have to consider paying over $100 to Eurocom for their unlocked bios.
    • By rsk
      Hello everyone just a little question. 
       
      i've just flash my p751dm2-g with the backed's bios and i gonna overclock it of course but i don't know how to clear cmos on this laptop.
      i have find nothing about it in the manual so i ask here. 
       
      Thanks 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.