Jump to content

tyriel

Registered User
  • Posts

    16
  • Joined

  • Last visited

About tyriel

  • Birthday 11/19/1982

Contact Methods

  • Steam
    tyriel1982

Profile Information

  • Gender
    Male
  • Location
    Poland

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

tyriel's Achievements

Settling In

Settling In (2/7)

10

Reputation

  1. Hi @Klem, I want to unlock my Dell Latitude 5300 2 in 1 Bios, This is the bios https://www.dell.com/support/home/pl-pl/drivers/driversdetails?driverid=6c7yj&oscode=wt64a&productcode=latitude-13-5300-laptop
  2. Hi @Klem, I want to unlock my Dell Latitude 5300 2 in 1 Bios, This is the bios https://www.dell.com/support/home/pl-pl/drivers/driversdetails?driverid=6c7yj&oscode=wt64a&productcode=latitude-13-5300-laptop
  3. Maximum OC I write with a translator and sometimes translate nonsense, my oversight
  4. Pity :(, so there is no chance of OC memory? That's why I was wondering why now the bigger result, the same OC: D. So TDP is already at max. So in a nutshell, is it the max capacity of this GPU?
  5. Can not gently raise the voltage vram in gpu? Could this help? If you can raise the TDP limit in vbios, then this might help, I think so The card is MXM standard with good power section much more specific than soldered 960 / 860m series ... Btw lock 135mhz removed great thanks
  6. Unfortunately after uploading the bios to the GPU the system hangs or reboots I edited the memory clock to stock and the card works with this bios but the 135mhz lock still works ... :( I installed it on a laptop and it has OC lock on vram I do not know if it's a TDP lock, the temperature is ok max 76c (furmark) do you have a patent on it? I tried to edit the bios but every time the OC memory causes the card to become unstable even 100mhz cause blue screen sometimes, on the internet people write that the gtx960m / 860m with these memories is 6000mhz without problem and here is impossible, the card itself has a better power section from Soldered 960 / 860m and is better chilled, asic at 80.5% so very well ... Do you have any idea how to solve this?
  7. Hello Klem You recently helped me with K2100m, today I made an upgrade GPU to M2000M and here my request, could you remove the + 135mhz lock and turn the memory to effectively have 6000mhz instead of the original 5000mhz? Thanks a lot. GM107.rom
  8. WOW I do not know what you did but first it works like charm and secondly nothing changes I have higher GPU performance after flash this bios Before: http: //www.3dmark.com/3dm11/12215343 After http: //www.3dmark.com/3dm11/12216441 Thanks a lot
  9. Everything Ok, core unlocked but as soon as I launch 3d applications no matter if OC card or not the laptop hangs and only restart helps :( back to stock Do you have any ideas why this is happening?
  10. I found the bios to k2100m I uploaded it to my card and the card works with it now I have a great request Klem, could you remove the 135mhz lock on the core and unlock the voltage, etc. Thanks a lot. Bios in the attachment 1.rom
  11. When i did this lcd flashing for 15 sec and nvflash give me backup.rom with 0kb size and total empty inside :(
  12. Another no go If i try with nvflash lcd give me artifacts and nothing happened i must reset laptop to make him to work again
  13. Jaki Laptop ? Bez obciążenia ja mam tyle na Gelid GC Extreme napisz jaki CPU w nim siedzi po temperaturach wnioskuję że i5?
  14. HP.QuadroK2100M.2048.130612.rom Gpu-z give me error (not supported device) i found bios for my GPU on https://www.techpowerup.com/vgabios/149851/hp-quadrok2100m-2048-130612 i think the same as main is this possible to made it for OC ?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.