does anyone know, which is the chip holding the VBIOS-ROM on an AMD Pro-WX 7100?
I've two AMD Pro WX 7100 which doesn't work. One has maybe a wrong VBIOS and gets deativated in BIOS before any system boots. The other one is not recognized by the MB so I suspect this one to be defective and un-soldered two chips, which I suspect to be the VBIOS-ROM:
On earlier GPUs, the VBIOS was the chip closer to the GPU. But here, this chip has a bottom SMD contact which looks more like some power electronics...
So before I start soldering on the probably working GPU - can you tell me, which actually is the VBIOS?
hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
When my first CPU fan on Y500 is broke i replaced it on something compatible (non-original) and planned to replace it later on original. Since that time happened a lot things, but i still using that non-original fan. But i did some research and here is what i founded:
1. Forcecon (marked as FCN on fan)
DFS5413005MH0T-FC1C (5V - 0.5A)
Spotted in: Y400, Y500.
2. Asia Vital Components (marked as AVC on fan)
BNTA0612R5H-P007 (5V - 0.5A)
Spotted in: Y410p, Y500, Y510p.
3. Sunon (marked as SUNON MagLev on fan)
MG60120V1-C230-S99 (5V - 2.25W (0.45A))
Spotted in: Y410p, Y500.
So, which to choose? Any recomendation? Maybe there also unexpected way (completely diffirent fan from another company for another laptop)?
Hello All. I have a question:
I need to repaste my laptop. To clean the old thermal paste, i went to the pharmacy and bought an acohol solution with 78% alcoohol (highest content they had).
However, the same solution is also 2% salicilic acid. There are no other components in the solution (except 20% water). Can i usr it to clean the CPU anyway?