Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Hi all,

I thought it would be helpful to summarize in one post all the useful links I go through before I am purchasing any PC component. Typically I go over more or less "techy" guides, as I want to at least get some rough idea what I should be looking for when I am purchasing components, rather than just blindly following the sexy numbers that manufacturers like to put out and brag with. These are not review links, but links that should help buyers understand what is it they are buying and what to look for. Some of them are opinionated posts and contain recommendations for specific products. I am kind of picky when it comes to components, so I often (time-permitting) do a lot of research. :)


How SSDs work: Solid-state revolution: in-depth on how SSDs really work | Ars Technica

This article goes into tech details of how Flash memories in SSD work, what an SSD controller actually does, what is TRIM, garbage collection and all that cool stuff.

SSD reviews thread: SSD Reviews Thread - Storage Forums

Links to tons of review articles for tons of SSDs.

SSD info - http://thessdreview.com/category/ssd...ginners-guide/


The Truthful Mouse Guide: The Truthful Mouse Guide

Great guide explaining the technical stuff about mice, why DPI is pretty much irrelevant, talk about different sensors and sensor types and give some opinions on particular mice.

Overclocking the USB port to 1000 Hz polling rate: vexed.ca: a whole new way of wasting your day » article » MOUSE optimization – 1000 hz mouse polling on 64 bit systems.

These are the generic USB mouse drivers that can be overclocked for high polling rates -- mainly useful for improving the performance for older mice.


SmallNetBuilder: Router Charts - WAN to LAN Throughput - SmallNetBuilder

Here they test do all kinds of funky tests with wireless routers, helpful when choosing a new router. Benchmarks galore! And lot's of it!


LCD Monitor guide: LCD Monitor Buyer

I think this is the best LCD guide I found online. They explain how different LCD matrices work, differences between TN, IPS and PVA, monitor response times, and so on.

Monitor info - Monitor Specifications

More monitor stuff - http://www.flatpanelshd.com/


This is the most helpful thread I found online about gaming headphones and headsets, but it mostly just includes very short reviews on lots of headphones, speakers, sound cards, etc. They are also sorted based on whether they are used for music, gaming, or a bit of both.

In-Ear-Monitor (Earphones) reviews of 240 products: Multi-IEM Review - 240 IEMs compared (Spiral Ear SE 3-way Reference added 06/03/12)

Head-Fi Shootout reviews of 102 headphones: Shootout: 102 Portable Headphones Reviewed (Panasonic RP-HTF600 added 04/29/12)

Frequency responses of headphones: Frequency Response Of Headphones - Head-Fi.org Community

Techy stuff. Mhm.

I'll keep updating this if/when I find more stuff, hopefully someone else finds it useful. :)

EDIT (Oct 31st 2012): As per suggestion of sgogeta4 I made this thread sticky. If you'd like to add something just post it below and I'll update this original post.

Thanks to sgogeta4 for links as well. :)

EDIT (May 05th 2013): Removed links to unfriendly forums. :(

  • Thumbs Up 12

Share this post

Link to post
Share on other sites

Great thread Unreal. They are all winning resources. Thanks for posting these, I'm out of thanks till tommorow ;)

Share this post

Link to post
Share on other sites

I love the links, very informative with lots of techy stuff (keep in mind that in this community this is like posting porn). :P

Share this post

Link to post
Share on other sites

Definitely agree with you haha but sorry, this thread is ALMOST as good as the hot chicks thread ;)

Share this post

Link to post
Share on other sites

Thank you for this guide, I need to replace my dead deathadder ;) so this will come in handy, since the omrons used in new razer mouse are crap.. 

Share this post

Link to post
Share on other sites

I didn't realize you could "OC" your usb ports. I'll have to try this. I have my mouse plugged into a 2.0 port right now because I need the 3.0 ports for flash drives and whatnot. Thanks!

Share this post

Link to post
Share on other sites
On 3/22/2019 at 2:58 AM, agentcool said:

can i ask whats Hard Disk 7200 difference than normal ones


Not sure whether you still need answer (as the thread seems pretty stale) but generally Hard Drive Disks tend to operate on different speeds, most notably 5400 and 7200 RPM. Of course most of the time you want to have the fastest, which would be 7200 in that case.


Ofc you can still invest in SSD ;-)

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By pro noob
      Hi i searched alot and could not find any help regarding external gpu for my hp pavilion model 15-e020tx. Even though its not a really old laptop. Would appreciate if some 1 could guide me to a link if it has already been shared. 
      I want e gpu for playing a game dota 2.
      specifications of laptop

    • By angerthosenear
      Please ask for support in the main DSDT Override or DIY eGPU Experiences Thread.
      I have been out of the eGPU realm for too long to provide adequate support.
      Here is a guide to performing a DSDT override with hopefully less misery, and setting up your computer to have your iGPU, dGPU, and eGPU working at the same time! Oh boy this is going to be fun.
      This is my system specs (Fujitsu T901):
      16GB RAM
      NVS 4200M
      GTX 660 Ti
      Windows 7 Enterprise x64
      Now it begins..
      Disconnect your eGPU until I say so.
      If you can, you should perform a DSDT override. The method shown in the official thread was really hard at
      How to perform a DSDT override:
      Now for the fun part........
      Disconnect your eGPU Uninstall ALL (ALL MEANS ALL) (dGPU included!!!) Nvidia drivers (keep the Intel graphics driver) Use Driver Sweeper and check all the Nvidia options, run, reboot, turn off computer -- don't install the driver for the dGPU yet Connect eGPU and go to Setup 1.x Set your eGPU port to G2 (assuming your have an adapter that supports G2, and your computer as well - if not, then skip setting the port to G2) dGPU off 32-bitA compaction for iGPU eGPU chainload to your OS Windows may yell at you to reboot due to hardware changes, don't quite yet Check device manager, you might (I did) have error 43 Attempt to install the latest Nvidia drivers for you eGPU -- still don't install drivers for your dGPU  
      If your lucky, it will install, if not:
      shutdown/reboot Setup 1.x do the same as before (dGPU off and such) Attempt to install the Nvidia drivers again for your eGPU After a few hours of fiddling around, you should get them installed (keep your dGPU off this whole time) ONLY AFTER YOU GET YOUR eGPU DRIVERS INSTALLED!! (and as such, error 12 in device manager) Go to Setup 1.x Set port G2 on your eGPU port (again, if you support G2) 32-bitA compaction for iGPU dGPU eGPU (or choose 36-bit if you performed a DSDT override) chainload  
      You will probably get the reboot due to new devices again, but before you do, check device manager
      Might have a generic VGA device or something instead of the NVS 4200M
      Attempt to install the drivers for you dGPU now
      If no luck, reboot and do the same Setup 1.x as before (with dGPU on)
      Attempt to install dGPU drivers again
      Reboot after you get your dGPU drivers installed
      Keep the same Setup 1.x method
      If your lucky you should have your iGPU dGPU and eGPU show up fine in device manager.
      You can go to the Nvidia control panel and dedicate your dGPU as your PhysX processor, it works really well. (If you play stuff that supports PhysX and have an at least somewhat useful dGPU)
      I hope this helps.
      ^ over 20 hrs of fiddling around well spent ;-;
      HOW TO: Update drivers (probably):
      You can check your driver version for both your eGPU and dGPU in the System Information dialogue box under 'Help' in the NVIDIA Control Panel (you can even check your Bus here too (PCI Express x1 Gen2 as shown for my eGPU).
      iGPU + dGPU + eGPU

      dGPU PhysX dedicated:


      ALL THE MONITORS (and all different resolutions too ):

      Check out a video here:
    • By Akaraah
      Hi all! Figured since there aren't many avenues out there as of yet that properly show how to dissect your phoenix, I'd try to take up the mantle with my own experience in upgrading the LCD panel from FHD 1080 to the 4K panel. Before we get started, I'd like to present a list a useful tools to have beforehand if you intend to pursue this endeavor. I'll be providing pictures of my own tools as well as links to various components you need for purchase if you intend to follow-suit:

    • By n1smo
      I followed the youtube video Lenovo Y400 Y500 Full Disassembly - YouTube. However, the video was probably created with a prototype y500 because some of the layout of the laptop did not match mine. Most noticeably is that there are *three* screws holding the keyboard down not *two*, I almost ripped the keyboard trying to pull it off with one screw still in there. Also, a few of the ribbons are located in different places which I think is an improvement over the y500 in the video. Finally, the hardest part of the entire process was to remove the back cover because it is held on by plastic tabs facing in different directions so the best way is to wiggle it left and right while lifting and not lift directly up.



      That is just regular white thermal paste on the heatsinks. The OEM thermal paste resembled AS5 in color and thickness and I recommend that it be left alone if the temperatures are good. I have since replaced the cheap stuff I put on there with AS5 and still have not seen the temperatures I saw when it was stock (still 3-5C higher).

      Here is what I did to stop the twitchy touchpad (issue is well documented in the Lenovo support forum) and the random extra characters the keyboard would add while typing (less known issue).


  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.