svl7 Posted February 6, 2012 Author Share Posted February 6, 2012 GPU-Z reports 0.9250 when running at 3D clocks. Yeah, that's what I expected after looking at the VBIOS, the card is already set to the highest valid voltage entry of the voltage table... all the higher values there aren't assigned to proper identifier. Valid entries are only for 0.82V, 0.90V and 0.93V, which is also the current setting and corresponds with your GPU-Z reading. So I can't raise the voltage per vbios, the only thing I can do is undervolt it, but I don't think you want this... The only way left for raising the voltage is a hardmod, unless you can provide me with the manufacturers tool for VBIOS development Quote Link to comment Share on other sites More sharing options...
Atlas Posted February 6, 2012 Share Posted February 6, 2012 That's a damn shame, I would have tought it could be done seeing the N55 has a mod.Well, thank you very much for looking into this! Quote Link to comment Share on other sites More sharing options...
svl7 Posted February 6, 2012 Author Share Posted February 6, 2012 Yeah... me too. The stock 3d voltage of the n55 is 0.87V, I'm actually surprised that Asus set it relatively high for the N75... 0.93V should already allow a nice OC, at least that's what I've seen from the Alienware M14x users. Quote Link to comment Share on other sites More sharing options...
Atlas Posted February 7, 2012 Share Posted February 7, 2012 The N75 has a very nice overclockable GT555M onboard. I can get a stable overclock with the GPU at 780 and MEM at 1000. But we always reach for more as overclockers. The standard clock is pretty high anyway 675/900, so that could explain the higher voltage. I do not know the standard cpu / mem speed in the N55. Quote Link to comment Share on other sites More sharing options...
turban_elite Posted March 7, 2012 Share Posted March 7, 2012 Well, I kinda did the BIOS Flash from DOS Drive thing. I put in AFU236U /iN55SFAS.ROM /pbnc /n. All it did was it showed my AMI Update Utility and copyright stuff. So I'm guessing my BIOS was flashed in less than a second. Cause these are my results after.While I'm playing TF2 and BF3 : http://gpuz.techpowerup.com/11/12/28/5hz.png.Notice the volts.hey man, could you give me a step by step of what you did, or anyone else that understands what he did exactly? I've been wanting to go back to the stock bios for a while now. cheers Quote Link to comment Share on other sites More sharing options...
phoronex Posted March 20, 2012 Share Posted March 20, 2012 Hello, GuysI wonder that you are able to play after overclock the Nvidia GT555Mand I face anther problem which the dedicated Video Memory (VRam) Is only 64,and i didn't find a way yet to increase it, So any helphttp://img692.imageshack.us/img692/3767/vram.jpg Quote Link to comment Share on other sites More sharing options...
romperstomper Posted March 22, 2012 Share Posted March 22, 2012 is there a currently working version of this? when I try to flash it tells me that my current bios is newer than the one attached to this thread and it won't update it for me.thanks, RS Quote Link to comment Share on other sites More sharing options...
svl7 Posted March 22, 2012 Author Share Posted March 22, 2012 So there is a newer BIOS revision? I can take a look at it. Quote Link to comment Share on other sites More sharing options...
romperstomper Posted March 22, 2012 Share Posted March 22, 2012 i'd appreciate it, thank you Quote Link to comment Share on other sites More sharing options...
svl7 Posted March 24, 2012 Author Share Posted March 24, 2012 The modified BIOS is based on the latest one available from Asus, I need to take a look at the flash utility. Quote Link to comment Share on other sites More sharing options...
romperstomper Posted March 26, 2012 Share Posted March 26, 2012 sorry to be dense, does that mean that it needs a newer bios file or an adjusted flash utility? Quote Link to comment Share on other sites More sharing options...
romperstomper Posted March 31, 2012 Share Posted March 31, 2012 The modified BIOS is based on the latest one available from Asus, I need to take a look at the flash utility.I think you might be wrong about that. when I used the inbuilt bios flasher (lauched from the bios itself), it tells me the current system bios is from aug 27 2011, and the one that I am trying to apply has the same time & day timestamp and thus it will not update it. can you try to change the time stamp on the file and re-upload?thank you Quote Link to comment Share on other sites More sharing options...
svl7 Posted March 31, 2012 Author Share Posted March 31, 2012 Well, as I said, it's based on the latest BIOS and apparently the flash utility doesn't allow you to reflash the same version.. that's why I said I needed to take a look at the flash software. There must be a command or a possibility to force the flash... I don't have an Asus system to test it, but I'd say use the DOS flash utility and check all the possible commands, I'm pretty sure it allows to force the flash when used with the proper parameters.I could easily change the timestamp in the BIOS, if only I knew where exactly to look for it... Quote Link to comment Share on other sites More sharing options...
romperstomper Posted April 3, 2012 Share Posted April 3, 2012 i'm attaching the possible options that are available when using the dos based flash utility. I have tried them all, and there is no force option Quote Link to comment Share on other sites More sharing options...
svl7 Posted April 3, 2012 Author Share Posted April 3, 2012 Try AFLASH 2 /auto:romfile.rom /force But I'm not sure whether it'll work, force might really not be included with the tool provided by Asus. Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 8, 2012 Share Posted April 8, 2012 Try But I'm not sure whether it'll work, force might really not be included with the tool provided by Asus.Dear sir,I finally flashed my bios with your mod using an older version of aflash2 and a usb DOS bootstick. Now how do I actually increase the voltage?//Silvan Quote Link to comment Share on other sites More sharing options...
romperstomper Posted April 8, 2012 Share Posted April 8, 2012 Try But I'm not sure whether it'll work, force might really not be included with the tool provided by Asus.sorry it doesn't work, there is no force option (tried it 50 ways)any ideas on how to proceed? is it a case of waiting for asus to release a bios update?cheers, RS Quote Link to comment Share on other sites More sharing options...
svl7 Posted April 8, 2012 Author Share Posted April 8, 2012 I finally flashed my bios with your mod using an older version of aflash2 and a usb DOS bootstick. Now how do I actually increase the voltage?Cool. Can you tell me which version and commands you used? Or maybe upload the aflash2 version you used here? Some users seem to have issues flashing the BIOS and I couldn't really solve it so far since I don't have a similar system to test it myself.Regarding the voltage increase - there's nothing you need to do. The change is only in the VBIOS (which is part of the BIOS, thus you had to flash the BIOS) and it only affects the 3d voltage. If you check the 3d voltage during a game you'll notice that it is higher than before and should allow you to overclock your card a bit more than prsorry it doesn't work, there is no force option (tried it 50 ways)any ideas on how to proceed? is it a case of waiting for asus to release a bios update?Maybe Silvan's method works for you, I hope he can post how exactly he did it.Else I have another option here. Download the attached flash utility, put it on a DOS bootable USB drive, boot from it and use this command: AFUDOS /iXXXX.ROM /pbnc /nnotice the "i" before the filename (XXXX.ROM).If it doesn't work I'll search the BIOS for the timestap, in case I find some time for this.AFUDOS236es.zip Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 9, 2012 Share Posted April 9, 2012 Hi,ofcourse I can upload the flash tool.I created a DOS bootable USB drive used this older version of aflash2 (the newest version gave me an error). AFUDOS just crashed my machine everytime i tried to flash.This finally worked:AFLASH2.zip 2 Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 9, 2012 Share Posted April 9, 2012 One thing I don't understand: Before I flashed my bios I already had a GPU voltage of 0,925 when playing games and now it is the same after the bios mod. Is there any way to go beyond 0,925 for more stability? I can run 775mhz gpu clock, 1550mhz shader clock and 1080 mhz ram clock stable 70-80 degrees GPU temperature. Everything above that creates crashes or creates artifacts. Can I go higher in any way? Would it help to overclock ram or CPU? I have asus n55sf-S1194V with I7-2670QM and 16gb RAM. (It says 8gb ram is max but 16gb also works, just upgraded it last week.) Actually 16gb ram didnt help my gaming performance at all. But now I can do video editing and a lot of multi tasking. Is there anyway to upgrade the graphics card on asus n55sf? 2 gpus or a faster graphics card? Is there anyway to overclock my harddrive? WD-WD750BPKT-80PK4T0 750GB, 7500rpm Or basically - how do I improve performance on my laptop? I know those are a lot of questions - thank you very much for your help in advance! Sincerely yours, //Silvan Quote Link to comment Share on other sites More sharing options...
svl7 Posted April 9, 2012 Author Share Posted April 9, 2012 It read 0.925V before flashing the BIOS? That's weird. But it's only a reported VID label, not an actual voltage value. With the modified BIOS you should be able to overclock slightly higher than before. There's no way to increase the voltage even more, it is already at the maximum value which can be set in the VBIOS.The mobile Sandybridge CPUs are bad overclockers, and I doubt you have a BIOS option for overclocking it anyway. Your GPU is soldered to the motherboard, you can't upgrade it. All you can do to increase the gaming performance is to overclock the GPU, as you already do. A faster hard drive simply decreases load times and makes the system feel snappier. 1 Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 9, 2012 Share Posted April 9, 2012 Yes - it read 0.925 before the modified bios. I used nvidia inspector to overclock.Does the n55sf have a slot for an additional graphics card? Quote Link to comment Share on other sites More sharing options...
svl7 Posted April 9, 2012 Author Share Posted April 9, 2012 No, there isn't. Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 10, 2012 Share Posted April 10, 2012 OK, no worries. Thank you sir. But!! I want to increase my voltage further! Why doesnt MSI afterburner or EVGA precision allow me this even if i enable the settings? I even changed the cfg of MSI afterburner but still no result. Is this because of Nvidia Optimus technology? Or is 0.925 simple THE max? Cause my temps are still below 80 degrees. Vielen Dank Quote Link to comment Share on other sites More sharing options...
Silvan Posted April 11, 2012 Share Posted April 11, 2012 Wow! Now i can run 800mhz gpu, 1600mhz shader and 1100mhz ram and play Skyrim at absolute max! Amazing 70degrees Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.