James D

Ampers shoul be bigger due to bigger wattage. Voltage should be the same +-0.5W. You will need to resolder wire from your AC to newer one. I heared about 180W lock too.

My congrats! I have been in the same situation but I had to create proper image for flashing to the chip. What image was used for your laptop? Simple downloaded bios? And did you try blind flash?

So you haven't flashed Prema's BIOS. GPU-z says that your video BIOS is not modded. You need to try again. All commands should be launched in Windows (I assume) from 1 to 3. I assume you already have the latest 514 BIOS. EDIT: I am wrong about GPU-z bios. Perhaps you already flashed right. But anyway try it again to make sure.

Please post a GPU-z screenshot. And NvidiaInspector screenshot too.

GT series do not have gpu ids because MXM cards have its own video bios. Very good if you find gpu with msi vidwobios but i do not know if you will be able to boot with anotuer one.

I used NvidiaInspector and I suggest to use it. AS about temperature... In games it is VERY rare that I7 will be used at 100%. So you should monitor them while playing with GPU-z for example and the checking MAX temp. Just clean the fan and blow the grill, put thermal paste like MX-4 and all should be fine.

Download latest afuwin and save. However you will need hex editor to compile the proper backup. MAYBE you tell why you need backup? Becaude nobody told you how cause nobody did that. For recovery with usb stick you need original bios file while backup is needed only for flashing bios chip by programmator if all fails.

I would send it for warranty service and that's it. And then would NEVER use moded bios. What settings did you set for memory?

We need to know your exct model and current BIOS version.

Here you go. Your ASIC quality is much better than mine so you get better results. When you say bigger cards you mean desktop's? How can you be sure that they use the same memory chips?

It already exists. Made by Prema. http://forum.techinferno.com/msi/3038-prema-mod-bios-gpu-oc-edition-msi-ge-series.html

@Username, do not OC Memory to 3000 especially if your temperature is 90C. 1st thing is that it gives as little as no difference when you OC it above 2500-2600MHz on our 650M-660M. And the 2-nd is that it has higher chance to die... and what profit? Use notebook cooler like Notepal U3. I reach 90 only using 1180/2500 EDIT: WOW!!! You have very good overclock up to 1215Mhz and it is stable after 5 minutes in Furmark? If you have FullHD maybe you try 1080p to test? Could you post your ASIC quality of your GPU? Use GPU-z for this. P.S. I used 2GB SD card in old USB card reader for flashing BIOS. I did it before and doing now. It never felt me. I believe there is no difference in what you are using. Looks like 660M has better chips.

This cute Smile makes me smile:) Thank you for checking. I don't need it very much personally but people with usual CPUs would (especially I5). Weird combo indeed.

f i r s t p o s t ! ! ! ! !

Nope. It is greyed out. I tried couple different versions of XTU (3 latest).

Here is my ME dump. I looked at the settings and it looks like it is already unlocked. DepositFiles

It's been a long time I checked this but didn't write. I dumped my ME and found that according to this guide (TNX khenglish) my ME lets me to change FSB. BUT I still can't. If you want I can upload my dump. Also, If anyone knows why would we need drivers for ME Interface? What doest it give? Here is pure driver for manual update through Device manager. It was in that archive in the first post but I decided to tell if someone don't know. Intel ME 8.1.10.1275 July 2012.zip

Yes. GE series 0NC and 0ND, with 650M and 660M all them have the same bioses. The only 2 differences are Windows version and models 60 or 70 of course.

After some time playing I am now hunger for more:D Like overvolting BIOS and disabling Nvidia Boost technology because of higher and more constant overclocking without it. Any plans on it?

Antiglare!!! Matte is what I like. The only disadvantage is crystalization effect but oh well.

A4Tech G6 PowerSaver. 800dpi. It is very comfortable and was the best for its price. Oftenly I miss higher dpi, at least 1000 because while playing it is hard to do a headshot. However it works on all kinds of surfaces and batteries are working for a long time. Will buy a G10. Was planning it since the middle of the previous year:)

IF I DON'T RESPOND TO A PM OR REPLY IN A THREAD, IT DOESN'T MEAN I'M IGNORING YOU; IT MEANS I'M CURRENTLY BUSY AND WILL RESPOND WHEN I'M NOT. What you don't understand? I am not responsible for any damage you can make flashing this mod. All unhide settings are in the Main menu at the bottom. Chosen settings are sorted out in Advanced Menu and other. DepositFiles Powerdrain and set settings to default before flashing BIOS. After flashing press ctrl+alt+delete and wait when it boots. It will turn off, then turn on for a second, then turn off again (no worries) and then it should turn on again. If not then start worry, so you better have 1 additional FAT flash drive with AMIBOOT.ROM file on it or second laptop just in case. Before flashing post here that you will so nobody would think that you bricked laptop while you just haven't even started by that time. Repeat, no responsibility from me. Do NOT post it elsewhere.

Sure. My deal was to offer. BTW RAM settings are hied in the locked main menu so the only way to unlock them is to unlock the submenu with all those dangerous settings. Good luck in unlocking W8 GPU vbios if you are still working on it and on overvolting if you find time. I will always be grateful for your mod.

While helping myself with OCing unlocked CPU (I7 3720QM ES QBC1) I made super unlocked BIOS for everybody with this laptop (MSI GE70). It is made in smart way of unlocking. Usual users can see additional settings which they may need and they are less dangerous. I am not saying they are safe because some of them look suspicious to me anyway like UEFI Boot enable/disable which is strange to see on a non-Windows 8 BIOS. But I also made available ALL unlocked settings at all in BIOS is 1 separate menu for extreme users who should know what they are doing and many of those settings are both unknown for usual users and dangerous. Considering the fact I was doing it for myself I used Prema's bios as I didn't want to loose ability of dGPU OCing. Therefore I will not post it on other forums (even on NBR) with Prema's vBIOS unlock. I assume it would be better for everybody to put it on T|I Forum, here in this post for example, instead of creating another Unlocked BIOS (for settings) without your vbios mod, am I right?

Crucial M4, Corsair Neutree, Samsung 830, 840 Pro. NOT Kingston. Not TLC SSD.