T6nn_k

What max temps 980M SLI gives on max load? I upgraded my P370EM3 heatsinks to SM-A and 680M SLI temps were similar or even cooler on slave GPU. After upgrade to 980M SLI I see up to 13*C higher on slave GPU (73*C and 86*C). Idle temps are cooler on slave tho (33*C and 34*C). I tried different mods (lapping, added extra heatpipe with fins) and even got a new fan but no improvement. I just mention that my CPU cooling is not shared with slave GPU as original EM heatsinks were designed.

So what was wrong and how exactly you solved it?

He did try but it was too difficult.

Just asked my friend about it and he ended up taking it into repairs and had to get a new display.

My friend had similar issue when he used Afterburner to overclock. Turned out that it had messed up EDID. Look into that.

Copy .inf from here https://forums.laptopvideo2go.com/topic/31809-geforce-37866-mobile-oem/

Where did you use 1,5mm and where 0,5mm?

EM and SM should both be same heatsinks (2 piece) and SM-A is one piece. In my experience all have same cooling performance on master GPU. Contact surface should be exactly the same.

Stacking thermal pads is not ideal. I'm going to use 1,5mm ARCTIC thermal pad, because it's not that brittle and I can repaste without braking the pad. I'll be installing 3mm+ on other side to cool the memory. Got the last tip from forum member. Picture with original pads will explain your R22 question.

1,5mm on memory and 2mm on R22 should be correct. Original pads are strong and can be easily reused so you can measure it but make sure you put new thermal paste. This is what I measured on 680m in P370EM3

It's most likely a bad thermal compound. Start from there mate. GC-Extreme is what I use.

That 1,5mm on top can't be right. It's more like 3,5mm if using 2mm on both sides.

External dac/amp will help you to forget it.

I dont use my P370EM clickpad that offten, but when I do I like it. I specially like the looks and huge tracking field. Overall I don't see what the fuzz is about it when you have a decent mouse to use.

It happened to me with 680m's with high OC. Should there be a modded driver or the OC is just too much?