ecureuilx

Hi, I have a clevo P650RE6, which Bios should I download? My laptop is reffered as P6xxRA/P6xxRG/P6xxRE3/P6xxRE6 series in the clevo.tw website. Does the prema MOD is supported for my laptop? My configuration : Chassis & Display Defiance Series: 15.6" Matte Full HD IPS LED Widescreen (1920x1080) Processor (CPU) Intel® Core™ i7 Quad Core Processor 6700HQ (2.6GHz, 3.5GHz Turbo) Memory (RAM) 4GB HyperX IMPACT 2133MHz SODIMM DDR4 (1 x 4GB) Graphics Card NVIDIA® GeForce® GTX 970M - 6.0GB DDR5 Video RAM - DirectX® 12

HiI wanted to upgrade my config with 4*4gb ram sticks. I ordered 2 kit (2x4gb) of 8gb hyperx impact DDR4. The pc doesn't boot. Fans speen but the laptop don't even go to boot logo. I just got a black screen. So I investigate what was wrong. I tested all the sticks separately 1 by 1. All are working. I tested also diverse configurations : there is 2 slot below keyboard (RAM1 and RAM2) and 2 slot in the other side of the motherboard (RAM3 and RAM4). I found that if i plugged 2 stick in RAM1 and RAM2 the pc boot normally and same with 2 stick in RAM3 and RAM4. But I have a black screen if i plugg the 4 sticks at the same time.I even reseted the bios by unplugging the bios batterry. Don't know what's wrong. Perhaps a newer bios should solve my problem?Ram reference : HX421S13IBK2/8

Hi, I have a Y400 with an ultra-bay (2x 650m). I've a problem with temps. My cpu and first gpu are way too hot. In furmark for example the first gpu hit 93C when the second gpu is under 70C. My first gpu is throttling at stock clock and goes under 700mhz. I decided to repast, replace thermal pads and cleaned the dust but after these steps nothing changed. Have I made a mistake with repast or smthing else? There is an furmark stress test :

Where is the panel number? I tried 144Hz but my screen went black.

My screen is stable at 120Hz on my Y400.

Is it possible to unlock the hd4000 graphics from y400?

It's not in the first page. You can find it there : http://forum.techinferno.com/lenovo-ibm/2874-lenovo-y400-y500-unlocked-bios-wlan-whitelist-mod-12.html#post49733

hi. I try to flash the bios but I do not. I did that : download the modified 2.02 bios made a backup of my bios with "Universal BIOS Backup ToolKit 2.0" fixed the bios with the y500fix tool. I put on the usb stick the fixed bios , the prr tool and the fpt.exe with the text file (was located in "dos version") I restarted on USB and try to flash with this command line : fpt.exe -f filename.bin -bios AND... Have error 28 : the bios is protected from flashing, contact your manufacturer. or something like that An idea? In the tuto the files where in bin extensions. my bios is in rom..

Is it possible to regulate the Fan's speed?

Is it possible to install a 1600*900 screen on the y400? Like the m14x or the g46vw. The screens are compatibel?

Just set Boot mode : legacy support Boot priority : legacy first USB Boot : enabled

I've add a msata ssd too and installed W7 on it. W8 is not adapted for a laptop with no touch screen.