Leaderboard

This is continuation of this thread (http://forum.techinferno.com/lenovo-ibm/2690-lenovo-y500-unlocked-bios.html) with all the necessary information in the first post in order to make it easier to find all the stuff. Lenovo Y400 / Y500 - 'unlocked' BIOS / wwan-wlan whitelist removal + modified VBIOS for higher overclocking The Lenovo Y500 comes with a pretty locked down BIOS, and in addition to this with a whitelist which prevents the user from getting 3rd-party wwan/wlan cards to work properly. The modified BIOS versions here will take care of this. Keep in mind that not necessarily all options available in the modified bios will work. Some might not do anything at all, others could possibly leave your system in a state which will prevent it from booting. Use care when changing stuff in the modified bios, don't touch things you're not familiar with. Use all the mods and software posted here on your own risk. Read the instructions carefully. NOTE: This will only flash the bios region. It won't reset the nvars set in the bios. *************** ONLY FLASH A MOD OF THE SAME VERSION AS YOUR CURRENT BIOS VERSION!!! If you're on 2.02 or 2.03 you can safely use the 2.04 update, *************** Attached you'll find modified versions of the Y400 / Y500 BIOS v1.03 and v1.05. Removed as they're outdated. Better updated to v2.02. The bios contains your Windows 8 license, therefore you can't just flash any file, else you'll have issue with your Windows activation. Furthermore the serial numbers, service tags etc. are stored there as well. You don't want to loose them. I wrote a little program that will take care of this issue and personalize the modified bios for you, so that you won't end up with an invalid Windows or no service tags. *************** Preparation to get to BIOS v2.02 (coming from any earlier version): Generally it's a good idea to keep the BIOS up to date. We're luck to have an official BIOS update to v2.02 apparently thanks to a leak on the net. (Lenovo is really bad when it comes to providing firmware updates and fixing issues). The leaked version must be genuine, else it wouldn't flash by using the regular method. If you want to update your system to v2.02 then grab the update here, extract it and flash the bios by executing the included InsydeFlash utility. Once the update is completed you can continue with the instructions below to get a modified version on your system. *************** Instructions for flashing a modified version: As a reminder - the modified BIOS needs to be the same version as you have on your system (2.02 to 2.04 is ok). Prepare an USB stick which can boot DOS. If you don't know how to do this, follow this short guide: Download the flash tool, for flashing you'll need the DOS version, but for creating the backup of your current BIOS the Win64 version will do as well, and it is faster. Get the prr tool as well. Grab the modified BIOS you want to flash, it comes as a tool which will patch the bios for you. Make sure you grab the version that corresponds with your BIOS version. Create a backup of your current BIOS using the flash tool you downloaded (first step) by runing the included backup.bat, or by using the Win or Dos version flash tool with this command: If the .bat doesn't work then open an administrator command prompt in your working directory and run the .bat per command line or type the command written above. In case you get an 'error 104' replace the parts file with the one that can be found in the 'error 104 fix' attachment at the end of the post. And if you still have issues after doing all of the steps above then please leave a reply in the thread and describe your problem. Open the downloaded tool and execute it. Drag and drop your BIOS backup file on it, it will create the mod for you. It will look like this: Put the modified BIOS, the prr.exe tool and the fpt.exe (along with the fparts.txt file) on the root of your prepared DOS bootable USB drive, restart your system and boot from that drive. Execute the prr.exe, if you don't get an error message continue by pressing enter. Then flash the bios by using this command (filename.bin obviously needs to be replaced with the name of the file you want to flash). If you can't remember the name of your file, use the command dir to display all the files on your drive. Flash with this: fpt.exe -f filename.bin -bios NOTE: The name of the BIOS file mustn't exceed eight characters (not counting the extension)! That's a DOS limit, so make sure the name of your file isn't too long. Wait until the process is done. After flashing it will verify the data, in case there's something wrong with the flashed data it will tell you. In that case don't reboot, just flash again. *************** Flashing the ultra bay 650m - only for SLI users with BIOS v2.02: The modified BIOS v2.02 also contains a vbios which will allow you to overclock your 650m past the 135MHz limit. As the ultra bay GPU has it's own vbios module you need to flash it separately. You'll need an USB drive which can boot DOS (just as the one you used for flashing the BIOS). *************** It might look a bit complicated at first, but that's the easiest way I could think of. Let me know if anything is unclear. >> Here's the 'buy me a beer' link in case you like this << Use at your own risk, you are responsible for your system and the changes you make on it. My programs come with absolutely no warranty to the extent permitted by applicable law. Grab file archive here:

Probably the error 43 is not due to a driver error in your case, but due to some other fault in the initialization of the card. See this thread:

Let's clarify some things, shall we? If you're using mPCIe with no Hotplug capability (or not sure): use Nvidia driver version 372.70 or earlier. If you're using ExpressCard or mPCIe with Hotplug capability: use Nvidia driver version 375.76 or earlier. If you're using Thunderbolt: Use either the Nvidia driver version 372.70 or earlier OR 375.86 or newer. Unfortunately, for those who are using the GTX 1050 Ti with no mPCIe hotplug capability or ExpressCard slot, you will not be able to use it correctly, the main reason is that the drivers for the GTX 1050 Ti are missing in the driver version 372.70 or earlier. We've concluded that this concerns only the Nvidia Pascal Architecture GPUs, so I personally recommend skipping this one or move to the Red team if eGPU matters to you. At the time of writing this, the latest available driver from nvidia is 375.95 which has completely broken mPCIe/ExpressCard eGPU capability.

You can have pci SSD with 2014, faster ram and faster Thunderbolt. But not upgradable ram. Anyway i would suggest 2014

I'd go with 2012 Model with upgradable since TB1 and TB2 are not much different in eGPU (Compare with my MBP2012+GTX960 and MBP2014)

INFO: First pics of a AKiTIO Thunder3 DIY eGPU @benjaminlsr presents the first eGPU build with a AKiTiO Thunder3 at https://www.techinferno.com/index.php?/forums/topic/10280-intel-nuc6i7kyk-gtx106032gbps-tb3-akitio-thunder3/&do=findComment&comment=149495 quoted below. Thank you Looks to have the same chassis as the AKiTiO Thunder2 with some slight cosmetic differences and of course a TB3 internal board. I would expect the same AKiTiO Thunder2 power and chassis mods can be applied here.

Hi, for windows 10 x64 you need download the last version of nvflash and create a new ''nvflash'' folder in C, put inside this folde all nvflash files and bios, open cmd as administrator and type: cd C:\nvflash Nvflash64 --protectoff nvflash64 -6 yourname.rom I hope will work for you : )