Bios Modder Klem Posted May 8, 2020 Bios Modder Share Posted May 8, 2020 8 hours ago, Ganzuas said: Hi, Klem, I have vBIOS modded and undervolted but temperature is too high yet. Could you help me with a new one? Hi! No, I make vBIOS to increase the possibility of overclocking a graphic card, but not to lower temperature, and not to undervolting. So, I can't help in your case. Sorry. Quote Link to comment Share on other sites More sharing options...
Ganzuas Posted May 8, 2020 Share Posted May 8, 2020 14 hours ago, Klem said: Hi! No, I make vBIOS to increase the possibility of overclocking a graphic card, but not to lower temperature, and not to undervolting. So, I can't help in your case. Sorry. Ok, Thanks anyway. Quote Link to comment Share on other sites More sharing options...
asteroidb Posted May 19, 2020 Share Posted May 19, 2020 (edited) Hi @Klem, Would you help me with this? I have replaced amd8970m to Nvidia gtx970m 6GB.I have bought it from ebay, it was originally on Clevo P370SM-A, and I have laptop Clevo P150SM-A. Bios version 1.03.09, KBC/EC version 1.03.08 Vbios version 84.04.48.00.21, Device ID 10DE 1618- 1558 5281 Laptop bios does not recognises card, and Device ID is not on the inf list. W10 drivers install unsucsesfull, managed to get it on W7, but apps requiring Nvidia card not working. Can this card be reflashed to work on my laptop? Could upload images, but not allowed. Thanks for your help, give a shout if you need more info. Edited May 20, 2020 by asteroidb Quote Link to comment Share on other sites More sharing options...
belkin Posted May 22, 2020 Share Posted May 22, 2020 Hi Clem, I want to remove the limit at +135 and unlock the voltage on my MX 110. What do I need for this? Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 9 hours ago, belkin said: Hi Clem, I want to remove the limit at +135 and unlock the voltage on my MX 110. What do I need for this? Hi! What the laptop model? Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 2 hours ago, Klem said: Привет! Какая модель ноутбука? Asus vivobook x540ubr Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 17 minutes ago, belkin said: Asus vivobook x540ubr Post here your bios backup and your screenshot in Nvidia Inspector utility (full window with overclocking sliders). I'll take a look. For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.https://www.sendspace.com/file/bhbprh or https://files.fm/u/qyf9r9c2 Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 27 minutes ago, Klem said: Post here your bios backup and your screenshot in Nvidia Inspector utility (full window with overclocking sliders). I'll take a look. For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.https://www.sendspace.com/file/bhbprh or https://files.fm/u/qyf9r9c2 I can’t get my BIOS using gpu-z and other programs, it says that my BIOS is unreadable. I can only give bios from the official site https://drive.google.com/open?id=1ytq5AzBx87BRA8l2yJcgx8rybflD5JJE - picture https://drive.google.com/open?id=1vsMvrllJpCT1xutSVx6C9ByZue05POyA bios Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 (edited) 4 minutes ago, belkin said: I can’t get my BIOS using gpu-z and other programs, it says that my BIOS is unreadable. For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.https://www.sendspace.com/file/bhbprh or https://files.fm/u/qyf9r9c2 4 minutes ago, belkin said: I can only give bios from the official site I don't need it. Edited May 23, 2020 by Klem Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 12 minutes ago, Klem said: For creating backup of bios you can use attached backup tool. Extract attached archive directly on the Desktop and run backup tool as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Post here this archive "results" or upload it into any fileserver and post the link.https://www.sendspace.com/file/bhbprh or https://files.fm/u/qyf9r9c2 I don't need it. I do not understand your message, I am not a native speaker of English, I do not know it well. Here is a link to the results https://drive.google.com/open?id=1wt72xqTB3GPTdyOhDUKL5R5NcDJYliXM Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 1 hour ago, belkin said: I do not understand your message, I am not a native speaker of English, I do not know it well. Here is a link to the results https://drive.google.com/open?id=1wt72xqTB3GPTdyOhDUKL5R5NcDJYliXM Well, I checked your bios, it's protected against write any modified/unlocked bios. In this case only two ways: 1. We can try to disable this protection. 2. You will need to flash unlocked bios with hardware SPI programmer (like CH341A). Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 5 minutes ago, Klem said: Ну, я проверил ваш BIOS, он защищен от записи любых модифицированных / разблокированных BIOS. В этом случае только два пути: 1. Мы можем попытаться отключить эту защиту. 2. Вам нужно будет прошить разблокированный BIOS с помощью аппаратного SPI-программатора (например, CH341A). "Try to unlock" and "flash the programmer" are two different things? If so, am I risking anything when trying to unlock? Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 (edited) 5 minutes ago, belkin said: "Try to unlock" and "flash the programmer" are two different things? Please, read my previous post carefully. I wrote: "... In this case only two ways: 1. We can try to disable this protection. 2. You will need to flash unlocked bios with hardware SPI programmer (like CH341A)." 5 minutes ago, belkin said: If so, am I risking anything when trying to unlock? No, but method may be too difficult for you. Edited May 23, 2020 by Klem Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 8 minutes ago, Klem said: Пожалуйста, внимательно прочитайте мой предыдущий пост. Я написал: «... в этом случае только два пути: 1. Мы можем попытаться отключить эту защиту. 2. Вам нужно будет прошить разблокированный BIOS с помощью аппаратного SPI-программатора (например, CH341A). " Нет, но метод может быть слишком сложным для вас. if I really do not risk getting a "dead" laptop, then I agree to try to unlock. I don’t think that it will be very difficult for me. What is needed for this? Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 (edited) 18 hours ago, belkin said: if I really do not risk getting a "dead" laptop, then I agree to try to unlock. I don’t think that it will be very difficult for me. What is needed for this? Ok, download attached archive. Extract it directly on Desktop. Format any USB flash drive into FAT32, then put the folder EFI to the your already formatted USB flash drive. It should create a folder structure like this: F:\EFI\BOOT\BOOTX64.EFI Go in bios setup menu, search and disable "Secure Boot" option. Then plug created USB flash drive into laptop and try to boot laptop from USB flash drive. If you did all things correct, then you should see a message saying something like: Code: Welcome to GRUB! Entering rescue mode... error: file not found grub rescue> Edited May 24, 2020 by Klem Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 (edited) 1 hour ago, Klem said: Ok, download this archive: https://files.fm/u/ffuer35v Extract it directly on Desktop. Format any USB flash drive into FAT32, then put the folder EFI to the your already formatted USB flash drive. It should create a folder structure like this: F:\EFI\BOOT\BOOTX64.EFI Go in bios setup menu, search and disable "Secure Boot" option. Then plug created USB flash drive into laptop and try to boot laptop from USB flash drive. If you did all things correct, then you should see a message saying something like: Code: Welcome to GRUB! Entering rescue mode... error: file not found grub rescue> Am I doing something wrong? Writes to press tab after clicking this happens. What am I doing wrong? here the photo for some reason does not load, here are the links https://drive.google.com/open?id=10QEOcp_3B_ZBMVbMgMys7k9kX0yBgJml https://drive.google.com/open?id=12vNhNHLUSd4l9Kz34qTh7guzqon2BBvj Edited May 23, 2020 by belkin Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 2 minutes ago, belkin said: Am I doing something wrong? Writes to press tab after clicking this happens. What am I doing wrong? Post screenshot. Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 2 minutes ago, Klem said: Post screenshot. photos by links, I can’t upload here, it gives an error ... If it is important, I can try to upload to the forum again Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 2 minutes ago, belkin said: photos by links, I can’t upload here, it gives an error ... If it is important, I can try to upload to the forum again I don't see your link. Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 1 minute ago, Klem said: I don't see your link. https://drive.google.com/open?id=12vNhNHLUSd4l9Kz34qTh7guzqon2BBvj / https://drive.google.com/open?id=10QEOcp_3B_ZBMVbMgMys7k9kX0yBgJml Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 6 minutes ago, belkin said: https://drive.google.com/open?id=12vNhNHLUSd4l9Kz34qTh7guzqon2BBvj / https://drive.google.com/open?id=10QEOcp_3B_ZBMVbMgMys7k9kX0yBgJml On screenshot all looks like ok. Now that you have the GRUB console, you need to enter the following two commands: setup_var 0x963 0x0 setup_var 0xF66 0x0 After each command press Enter button. Please note: Your system may seem to lockup after you enter each of these commands. The first setup_var may never seem to finish. Give it a few minutes and if nothing happens, force-reboot the machine and redo step 4 to get back to the GRUB console. Once there, enter the second setup_var command and allow the same to happen. If nothing happens again, just give it a few minutes then force restart the machine. After you have done both of these commands restart the machine and boot into Windows as normal. Then run backup tool again, and send me new "results". Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 (edited) 18 minutes ago, belkin said: https://drive.google.com/open?id=12vNhNHLUSd4l9Kz34qTh7guzqon2BBvj / https://drive.google.com/open?id=10QEOcp_3B_ZBMVbMgMys7k9kX0yBgJml Новая папка.7zaccidentally sent it 7 minutes ago, Klem said: На скриншоте все выглядит нормально. Теперь, когда у вас есть консоль GRUB, вам нужно ввести следующие две команды: setup_var 0x963 0x0 setup_var 0xF66 0x0 После каждой команды нажмите кнопку Enter. Обратите внимание: может показаться, что ваша система заблокирована после ввода каждой из этих команд. Первый setup_var может никогда не закончиться. Дайте ему несколько минут, и если ничего не произойдет, перезагрузите машину и повторите шаг 4, чтобы вернуться к консоли GRUB. Оказавшись там, введите вторую команду setup_var и позвольте этому произойти. Если ничего не происходит снова, просто подождите несколько минут, затем перезапустите машину. После того, как вы выполнили обе эти команды, перезагрузите компьютер и загрузитесь в Windows как обычно. Затем снова запустите инструмент резервного копирования и пришлите мне новые «результаты». Sorry, because of my English I didn’t really understand, restart after each command? Edited May 23, 2020 by belkin Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 4 minutes ago, belkin said: Sorry, because of my English I didn’t really understand, restart after each command? No! Just press the "Enter" key after each command. Quote Link to comment Share on other sites More sharing options...
belkin Posted May 23, 2020 Share Posted May 23, 2020 8 minutes ago, Klem said: No! Just press the "Enter" key after each command. is this a mistake or is it the way it should be? https://drive.google.com/file/d/1s0MAQMOmqc_MQnI1zau_iavi1wOqNia0/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 23, 2020 Bios Modder Share Posted May 23, 2020 (edited) 9 minutes ago, belkin said: is this a mistake or is it the way it should be? https://drive.google.com/file/d/1s0MAQMOmqc_MQnI1zau_iavi1wOqNia0/view?usp=sharing Now run backup tool again, and send me new "results". I'll take a look, if now protection gone. Edited May 23, 2020 by Klem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.