Hello! My name is Arman! I from Armenia, and sorry for my English!
I have iMac Late 2013 with Intel core i5, 8Gb, NVIDIA GeForce GT 750M 1024 Mb. I have Boot Camp installation on my iMac (now i have 7 Windows, but i can update it to 10 or 8 Windows)
I discover that there is an Akitio 2, wich can use with iMac 2013 for productivity increase. I want to use akitio 2 with GTX 1050 ti 4Gb, but i dont know how it is intalling on iMac?
Who can write for me the process of installation ALL equipment (akitio 2 + GTX 1050 ti + imac)? What i must to do? I talking about from the very beginning to the very end.
PLEASE everyone, help me. You are my last chance !!!!
So now that we've had ample time to digest all the new AMD Vega 56/64 reviews and information, lets start a discussion about them. Performance wise, the Vega 56 more or less equals a GTX 1070 while the Vega 64 lines up with a GTX 1080. However, to many people's dismay, the Vega 64 is far too overpriced with the cheapest one currently available on Newegg being an XFX one for $689 which is nearly the same price as a GTX 1080 Ti but about 35-40% slower.
In addition, both the Vega 56 and 64 use more power than their counterparts and this especially applies to the Vega 64 with it nearly consuming twice as much power as the GTX 1080. Some of the reasons I've read over the internet from Vega buyers for their purchases are the ability to utilize their FreeSync monitors as well as some Linux uses.
I know our community here also utilizes desktop GPUs for eGPU uses and AMD does support eGPU now so with that in mind, do you plan to purchase a Vega 56 or 64 and if so, why?
Having pondered over a eGPU build I instead decided to put my GPU inside my 15.6 laptop by extending the laptop base. I have a Dell optiplex 390 where my GTX 750ti LP once lived but as I now spend more time with my laptop on the sofa the Dell optiplex is now a donor for my gaming laptop build. I'm using the Dell motherboard for this build. It has a i5-2400 CPU - 8GB DDR3 RAM - MSI GTX 750ti LP GPU. The Dell PSU is too big for this build so I will be using a Seasonic SS-250SU 250W PSU. The laptop used for this build is a Fujitsu LifeBook AH530 that has a 1366x768 LED screen, this screen will be replaced with a higher resolution 1600x900 screen. The extended base of the laptop is now 6.5 cm.
Parts needed to complete the build:
Seasonic SS-250SU 250W PSU
PCI Express 16x Flexible Extension cable
LP156WD1 (TL)(B1) 15.6" LED 1600x900 screen
LCD Controller Board
Ultra slim keyboard with touchpad
Work so far in pictures:
Continue reading the full thread here:
setup i have:asus x54c,Nvida geforce gtx660,psu corsair cx600, dock i use: exp gdc v8.4d note:(originally the notebook had intel celeron b815 processor, i replaced it with pentium b970,and added 2gb of ram other than that no other hardware changes were made) first time i connected it all and powered on,gpu fans started spinnig very fast and screen was on but all black and nothing happened so i tried the delay switch but with the same result, then i connected external monitor to the gpu, finally i was able to see manufacturer logo,but then it hanged on windows loading screen(back then i had windows 7 so you could clearly see the windows logo animation stopped) so i tried to hotplug the egpu by booting with original wifi card in (mpcie) sleeping then plugging the egpu in and resuming,but always i did so i was greeted with instant crash so i went searching for answers on the internet and i learned that i should isolate pin 22 so i did, finally i was able to boot into windows (with delay set on maximum) but the card wasnt detected, i purchased setup 1.35,installed windows 10 bios (i had windows 7 uefi) but i couldn´t get it recognized even in there. im sure all the componnents are fine, i got it sucesfully runing on my older laptop (lenovo u350) thanks for all the help in advance