Meaker Posted August 13, 2013 Share Posted August 13, 2013 So I have recently put together a 16F3 with 3740qm and 770M (clevo).On the stock vbios I have issues getting the drivers installed and going from the loading screen to a black screen. The device manager also complains about a resource conflict between the 770M and the HD4000.So I flashed the 11E0 MSI Vbios on and the drivers will install.However if I start a 3d application I get a driver crash, sometimes this reboots the machine with a BSOD, sometimes it recovers. If it recovers the 770M is permanently on but 3d works just fine.Anyone had this issue? Quote Link to comment Share on other sites More sharing options...
Meaker Posted August 13, 2013 Author Share Posted August 13, 2013 Ok, looks like the MSI vbios I found on this site is different to the one I found.Find it attached.With the one on here I get similar behaviour to the stock clevo vbios. With the one I have attached I get the behaviour I was describing.NVM.The one on here is a dell.so clevo and dell vbios are similar, the MSI one gives me the crashes :/770MSI.zip Quote Link to comment Share on other sites More sharing options...
Meaker Posted August 13, 2013 Author Share Posted August 13, 2013 Yes at this point I have to say at least the clevo 770M is not completely compatible with the 16F3. Quote Link to comment Share on other sites More sharing options...
Robbo Posted August 13, 2013 Share Posted August 13, 2013 Yes at this point I have to say at least the clevo 770M is not completely compatible with the 16F3. Quote Link to comment Share on other sites More sharing options...
Meaker Posted August 13, 2013 Author Share Posted August 13, 2013 Unlocked bios lets you do that no problem.The problem is all the outputs are hard wired into the intel chip so you wont get much out of it. Quote Link to comment Share on other sites More sharing options...
svl7 Posted August 13, 2013 Share Posted August 13, 2013 Might have an idea, just need to find time for that. I'll let you know, need to mod that 770m vbios anyway. 2 Quote Link to comment Share on other sites More sharing options...
Moderator BAKED Posted August 13, 2013 Moderator Share Posted August 13, 2013 So I have recently put together a 16F3 with 3740qm and 770M (clevo).On the stock vbios I have issues getting the drivers installed and going from the loading screen to a black screen. The device manager also complains about a resource conflict between the 770M and the HD4000.So I flashed the 11E0 MSI Vbios on and the drivers will install.However if I start a 3d application I get a driver crash, sometimes this reboots the machine with a BSOD, sometimes it recovers. If it recovers the 770M is permanently on but 3d works just fine.Anyone had this issue? Quote Link to comment Share on other sites More sharing options...
Meaker Posted August 13, 2013 Author Share Posted August 13, 2013 Yes it does but I get a blank screen after the loading screen when the drivers are installed. Quote Link to comment Share on other sites More sharing options...
omega939 Posted August 14, 2013 Share Posted August 14, 2013 OT.... @Meakerwhat is your "WEI Score" with your 3940XM @4 - 4.3 gigahertz? tnx Quote Link to comment Share on other sites More sharing options...
kiba208 Posted August 14, 2013 Share Posted August 14, 2013 I think you must modify original vbios by changing PCI vendor ID to MSI only. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.