Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Hello,

 

I am using on a MacBook Pro (Retina, 15-inch, Mid 2015) 2,2 GHz Intel Core i7 with Intel Iris Pro 1536 MB, Akitio TB2, a water-cooled Nvidia 1080 TI using the driver Nvidia Web Driver 378.05.05.15f01
OS: macOS Sierra v10.12.5 Script: automate-egpu.sh

 

I would like to ask you : is there any chance to overclock it on macOS?


Components:
V-tubler
Thermaltake C 1000 coolant
2x luna 12 red + led band
Radiator EK Water Blocks EK-CoolStream SE 240 (Slim Dual)
Pacific PT40-D5 Reservoir/Pump Combo 250
Akitio Thunder 2 pcie expansion
Plexiglass, acrylic, plastic isolation, screws
Water cooling fittings, pipes, hard tubing, without actually bending the tubing
Lian Li PW-PCI-E38-1 Riser PCIe x16 3.0, 380mm, flexibil, High Speed, EMI Shielding + powered
Openframe case Thermaltake Core P1
RM650 gold PSU+Paperclip

Graphic card:
Zotac water cooled 1080 TI Fe (Zotac 1080 TI FE + Separate mount of Titan X nickel waterblock)

05.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By -GP
      I got a msi ge60 2pf Apache pro & its specs :
       
      Processor-i7 4710MQ
      Ram-16GB 
      VGA- GTX 860M 2GB Maxwell 
       
      Could anyone tell me the best overclock that I could use on this GPU?
      Please keep in mind that the voltage cannot be changed as this is a laptop
       
      Thank you
    • By narbardarse
      ok, so, i have a serious problem atm.
      im trying to mod my bios so that i can go past the normal overclocking limit. however, everytime i try to do it, it always says "file size does not match existing bios size!", and it's really annoying, since i had to find everything myself, as no one else online tried this on my specific model, besides me. (which surprises me, really)
      this is the guide im following:
      So this is my detailed description how I managed to mod and overclock my GTX 960M in my Lenovo Y50-70. Please note: it is very dangerous to play with the BIOS, so you need to be very careful! I take NO RESPONSIBILITY for any damage or misuse of the information below! Use it AT YOUR OWN RISK!
       
      -------
       

      Necessary tools:
      A. Fptw64 from Intel (9.5 or above)
      http://forum.hwbot.org/showthread.php?t=75024
      B. PhoenixTool (2.50 or above)
      C. Maxwell II BIOS Tweaker (1.36)
      https://www.techpowerup.com/downloads/2562/maxwell-ii-bios-tweaker-v1-36/
       
      -------------------------
       
      How to flash Modded BIOS:
      0. Flash the latest (3.03 now) official BIOS
      1. From Windows, start 'cmd' as Administrator and read your your BIOS via Fptw64:
         Fptw64 -d BIOS.ROM -bios
      2. Reboot, enter your BIOS and check "Enable downgrading BIOS" feature (we need to downgrade first in order to flash the modded BIOS)
      3. From Windows, downgrade to 1.13 (this is necessary because the newer BIOSes have protection against mod-ding)
      4. After reboot & reflash, start Windows, then enter standby, wait a bit, then wake up the machine
      5. Create your modded BIOS, see separate list below
      6. Start 'cmd' as Administrator and write your _modded_ BIOS via Fptw64:
         Fptw64 -f BIOS_MODDED.ROM -bios
       
      -------------------------
       
      How to create modded BIOS (point 5 above):
      5.1 Start PhoenixTool.exe from Phoenix Tool 2.50 and open your previously saved original BIOS.ROM from point #1 above
       .2 The tool analyses it and shows some messages, click OK
       .3 Now you can find your vBIOS in the "DUMP" subfolder in the folder containing your BIOS.ROM, with the file name:
          BE13645B-2C2C-44D2-A64F-0EA052C34597_1796.ROM
       .4 Create your modded vBIOS, see separate list below -> let's call it 960M_OC.MOD
       .5 Click on "Structure"
       .6 Open "EFI BIOS" tag
       .7 Open second "File Volume {7A9354D9-...}" tag
       .8 DXE Core -> Compressed Section -> Raw section -> File Volume {7A9354D9-...}
       .9 In the very long list, find the following tag (usually displayed at around 80% of the list):
          Freeform {BE13645B-2C2C-44D2-A64F-0EA052C34597}
          This is the item containing the latest vBIOS
       .10 Open the tag, then "GUID defined section", then click on Raw section. "Internal number" (in the top right corner) should be 1796 for BIOS 3.03.
       .11 Click on "Replace" and select your modded vBIOS (called 960M_OC.MOD above)
       .12 Click exit "Exit" and say Yes to "Save changes?"
       .13 Close the Phoenix Tool; now you should have your BIOS.ROM updated (the original will be saved as BIOS.ROM.OLD for safety)
       
      -------------------------
       
      How to create modded vBIOS (point 5.4 above):
      Use Maxwell II BIOS Tweaker to change BE13645B-2C2C-44D2-A64F-0EA052C34597_1796.ROM;
      5.4.1 Open the ROM
         .2 Change "Boost Clock" on "Common" tab to the new boost-ed maximum value
         .3 On "Boost table" tab, use the slider in the right bottom corner to increase your max boost-ed value to the same number
         .4 On "Boost states" tab, at P00 profile, change the MAX values in the GPC, L2C and XBAR fields to the same max boost-ed value
         .5 Save your modified BIOS and rename it to 960M_OC.MOD
       
      (My boost-ed max value was 1359 MHz. I could then use MSI Afterburner's software tuning -> my 960M could reach 1454 MHz without voltage increase.)
      i know that it's for a different laptop, but its basically the same
      ill provide more info when im home
    • By Aun
      I am trying to find unlocked bios for overclocking but i cannot find it from a few days please someone help in me. its for my alienware 17 r3 with 970m and i7 6700hq.
       
      my dumped gpu bios
       
      i would really appreciate your help!
       
      and btw rn i OCed thru msi after burner core clock +135 and memory clock +250.
       
      cpu gpuz pic
      gpu pic
       
    • By mstfa
      i want an unlocked bios.
      laptop: ASUS ROG G751JL
      GPU: GTX 965M with 2GB GDDR5
      stock bios rom: https://drive.google.com/file/d/1OiB61aGlFyfDYpN5e61Fo31x7OdyQg5H/view?usp=sharingGM204.rom
      i want it to be able to overclock it even more for gaming.
    • By juquinha
      Hi!

      So, i got a strange situation here. I have an old Asus ROG G751JM laptop connected to an old Samsung monitor (Model S20C301L) through a VGA connection.
      This monitor supports both DVI-D and VGA inputs, while my laptop can output through VGA, HDMI or Thunderbolt/Mini DIsplayport. I wanted to upgrade to digital signal, so i bought an Thunderbolt/Mini DIsplayport to DVI cable.
      At first, it was a nightmare. There was absolutely nothing i could do to get it to work. I spent hours troubleshooting, but the monitor just could not detect any signal, only VGA one. But then this happens.
      I was testing with only one connection at once and i got tired of plugging and unplugging the cables every time. So i had the idea to keep both cables plugged in and change the source detection in monitor's menu when i wanted to. So, with the TB/MiniDP cable already connected, i've then connected the VGA cable (while DVI was selected as input source). The display started flashing. After 2 seconds, voilà, it was working. And i was like, "what the f***???" I've then unplugged the VGA cable, signal lost. Plugged it again, got digital signal.
      Well, i'm happy that it's working now, but i simply don't understand what's happening here. Why is that i need both connections simultaneously to make it work? WIll that still happen if i use a HDMI to DVI cable?
      Fun fact: the image displays only after windows startup. So, if i want to enter BIOS setup for example, i need to switch back to VGA as input source.
      Sorry for my english.
       
      Update: Can't run games with It, i get bsod.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.