Jump to content
EwinRacing Flash Series Gaming Chairs
BAKED

BAKED unlocked and stock BIOS for CLEVO TM, KM, DM and P6/P4 series

Recommended Posts

 

Quote

 

BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES WITH MOST MENUS AND OPTIONS UNLOCKED PLUS OTHER MODIFICATIONS

 5895ceb8cba9841eabab6072.png

NEW:

I HAVEN'T BEEN ACTIVE IN A WHILE BUT I MIGHT FIND SOME TIME SOON TO WORK ON AND RELEASE NEW MODS.

I STARTED WORKING ON V3.0 A WHILE BACK WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE, BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 

ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT

WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 

FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 

USE AT YOUR OWN RISK!

TM, KM AND DM SERIES

Spoiler

P75XTM/1/G and P775TM/1/G NEW! 

P870TM/1/G NEW!

P870KM/1/G New version! 

P75XDM3/G P77XDM3/G P775DM3/G New version! 

P75XDM2/G P77XDM2/G New version!  

P870DM2/G P870DM3/G New version!

P75XDM/G P77XDM/G New version!

P775DM/G New version! 

P870DM/G New version!

Spoiler

(DOS NOT NEEDED FOR TM, KM OR DM) FIRST MAKE A BOOTABLE USB-DRIVE WITH DOS WHICH CAN BE DONE WITH RUFUS, COPY THE FILES FROM THE FOLDER BIOS TO YOUR USB-DRIVE AND RESTART AND ENTER BIOS BY PRESSING F2 IMMEDIATELY AT THE BOOT LOGO, IN THE BIOS MENU GO TO BOOT - UEFI SETTINGS AND DISABLE UEFI BOOT.

SAVE AND RESTART BY PRESSING F4 AND THEN PRESS F7 TO ENTER BOOT OPTIONS AND CHOOSE THE USB-DRIVE.

WHILE IN DOS FIRST TYPE BACKUPDOS.EXE TO MAKE A BACKUP OF YOUR CURRENT BIOS THEN TYPE BAKE.BAT AND WAIT UNTIL THE WHOLE PROCESS IS DONE.

RESTART THE SYSTEM AFTER FLASHING (IT MIGHT TAKE A WHILE FOR IT TO START UP) PRESS ENTER WHEN THE CMOS MESSAGES APPEAR AND THE SYSTEM WILL REBOOT, IF IT STARTS TO BEEP WITH THE FAN RUNNING AT HIGH SPEED REMOVE THE POWER AND RESTART.  

RE-ENTER BIOS AND LOAD SETUP DEFAULTS BY PRESSING F3, SAVE AND EXIT WITH F4. DONE!

 
  • Thumbs Up 15

Share this post


Link to post
Share on other sites

Thanks for your hard work! We look forward to seeing more creations from you. 

  • Thumbs Up 2

Share this post


Link to post
Share on other sites

First of all thx for the great work and for sharing these bioses with the comunity but can u be more precise of what actualy this bios contains and what is actualy unlocked? 

And what are the diference between your bios and Prema's for example.

Can u elaborate the cangelogs and the modifications a little bit, I am sure the comunity will apreciate it.

Tahnk you again for the hard work. 

Share this post


Link to post
Share on other sites
4 hours ago, runix18 said:

First of all thx for the great work and for sharing these bioses with the comunity but can u be more precise of what actualy this bios contains and what is actualy unlocked? 

And what are the diference between your bios and Prema's for example.

Can u elaborate the cangelogs and the modifications a little bit, I am sure the comunity will apreciate it.

Tahnk you again for the hard work. 

Hi! Alot of new menus and options are available and I've added the chipset menu and more to come in the updated versions later on. Because no one have made and released unlocked BIOSes for these models I decided to do it.

Edited by BAKED

Share this post


Link to post
Share on other sites
27 minutes ago, BAKED said:

Hi! Alot of new menus and options are available and I've added the chipset menu and more to come in the updated versions later on. Because no one have made and released unlocked BIOSes for these models I decided to do it.

That's briliant, yet again thank you again and I think it's a big thx in the name of the comunity aswel, you deserve a big thx from all the Clevo DM/KM users who did not had the posibility to buy from a Prema partner resseler.

One thing puzzless me, most of the bios upgrades on this models ive seen comes with a EC/BLK also, does your bios dont need one, or it works on the stock EC/BLK? Sorry for so many questions but I am just cautios to not brick my machine.

THX

Edited by runix18

Share this post


Link to post
Share on other sites
2 minutes ago, runix18 said:

That's briliant, yet again thank you again and I think it's a big thx in the name of the comunity aswel, you deserve a big thx from all the Clevo DM/KM users who did not had the posibility to buy from a Prema partner resseler.

One thing puzzless me, most of the bios upgrades on this models ive seen comes with a EC/BLK also, does your bios dont need one, or it works on the stock EC/BLK? Sorry for so many questions but I am just cautios to not brick my machine.

THX

 

It will work just fine without flashing the EC, but you can upgrade it if you want to, I might include it in the flash later on for people who want it.

Share this post


Link to post
Share on other sites

I have a Clevo P870DM-G with bios version 1.05.07TCPS and EC 1.05.03. Will it be ok to flash your bios like this? Or do I need and updated EC?

Edited by runix18

Share this post


Link to post
Share on other sites
1 hour ago, runix18 said:

I have a Clevo P870DM-G with bios version 1.05.07TCPS and EC 1.05.03. Will it be ok to flash your bios like this? Or do I need and updated EC?

It will be just fine :)

Share this post


Link to post
Share on other sites

Just flashed your bios and I can confirm it works, no errors, no boot fails, no heart atack:hyper:(thx for that), the one ting I couldn't work out it is that it does not keep the fast boot option to enable, it always goes disable after restart (booting on pure Uefi from samsung nvme drive formated as GPT)

Edited by runix18

Share this post


Link to post
Share on other sites
35 minutes ago, runix18 said:

Just flashed your bios and I can confirm it works, no errors, no boot fails, no heart atack:hyper:(thx for that), the one ting I couldn't work out it is that it does not keep the fast boot option to enable, it always goes disable after restart (booting on pure Uefi from samsung nvme drive formated as GPT)

If you want to keep the Fast Boot option to enable always after restart, just flash this:

 

BIOS.rar

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

It works, thx and please keep us updated when you add more features to this bioses, or any other tweaks or fixes.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hi...

Any chances for a bios mod for P670 RS-G?

I've been waiting and trying to reach Prema for ages now...to no avail...

Share this post


Link to post
Share on other sites
4 minutes ago, Trooph said:

Hi...

Any chances for a bios mod for P670 RS-G?

I've been waiting and trying to reach Prema for ages now...to no avail...

I'll upload it in the morning, pm me if I forget! :)

Edited by BAKED

Share this post


Link to post
Share on other sites

Aw man...i for some reason i cant download it... download link throws an error at me that something went wrong

Share this post


Link to post
Share on other sites

Hey guys i have Clevo P670RP-6G (sticker under)

and CPU-Z in mobo tab showing me P65_67RSRP which bios i could eventually download/Flash?

I have i7 6600HQ and 1060 6gb. 

Share this post


Link to post
Share on other sites
On 2017-06-16 at 11:53 PM, Magru said:

Hey guys i have Clevo P670RP-6G (sticker under)

and CPU-Z in mobo tab showing me P65_67RSRP which bios i could eventually download/Flash?

I have i7 6600HQ and 1060 6gb. 

:)

https://www.techinferno.com/index.php?/files/file/110-bios-for-p6xxrsg/&do=download&csrfKey=8de190a2993d130fd93daea0be124a46

Edited by BAKED

Share this post


Link to post
Share on other sites

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Share this post


Link to post
Share on other sites
42 minutes ago, jamesrh305n said:

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

I've added the chipset menu and unlocked most of the other menus. That's about it at the time but I'm working on some stuff to come. :) 

Edited by BAKED
  • Thumbs Up 1

Share this post


Link to post
Share on other sites
4 minutes ago, BAKED said:

I've added the chipset menu and unlocked most of the other menus. That's about it at the time but I'm working on some stuff to come. :) 

Thanks. I have P870dm-g (XMG u726) can I flash this bios? with my current EC?

Share this post


Link to post
Share on other sites
3 hours ago, jamesrh305n said:

In this modded bios? can the integrated gpu can be activated in p870dm-g?

No it can not!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By AlanP
      Hi All
       
      I've been searching all over the internet and these forums in particular and I just can't seem to get any answers regarding GPU upgrades for the Clevo P150HM. Neither can I get any real info on the difference between the HM and the EM model - the EM seems to be the much more talked about model.
       
      Anyway, my current GTX 580M is causing a black screen very occasionally and I decided to purchase a used GTX 980M (N16E-GX-A1) from aliexpress as a replacement.
      The seller isn't giving me much information and I am unsure if they've flashed the vbios on this card themselves, regardless of that I cannot seem to find a custom BIOS for this laptop either, the closest I found is P150EM_17_11_PM_v2 which is obviously for a EM not a HM model, again I don't know much about these two models and if attempting a flash with that BIOS will brick my laptop.
       
      The 980M is the correct form factor, it fits in perfectly and even warms up when I turn the laptop on, I can see the POST screen display but then it simply maxes the fans and beeps out until it shuts down. It would seem to be a pretty clear indication of incompatibility.
       
      Model: Clevo P150HM
      MB Series: P150HMx
      BIOS Revision: 1.01.14
      KBC/EC Firmware Revision: 1.00.12
      Another version number listed (not sure for what): 2.10.1208
       
      I understand this is both an old subject and an even older laptop, but I would be extremely thankful for any help available and I am willing to drill down to create my own custom BIOS if necessary but I just need a point in the right direction.
       
      Failing all that, its not the end of the world as they've already agreed to a return and refund if I can't figure this out.
       
      Thank you.
    • By DoenerBoy123
      Hello guys 
       
      I've got a pretty weird problem with my M18x R2. I already searched the web but couldn't find an answer. A few days ago I changed some settings in the bios, if I remember correctly DMVT Pre-Allocated.
      After saving this setting the notebook refuses to even POST. I get no beep errors or anything. If I press the power button the system turns on, the leds turn on and then the system shuts itself off. I already reset the cmos, the IME, tested different configurations and so on. If I remove all the memory sticks I actually get the memory error code. At this point I'm pretty sure that the bios got corrupted for some reason when saving these mentioned settings. Did anyone had a similar problem and got a solution for this? I repaired lot's of notebook but never had an error like this...
      The Bios installed is the a15 unlocked.
    • By Malenford
      Is it possible to unlock bios on that model? Please help me with it if somebody can.
    • By kael2404
      Hello. Bios in my Thunderobot GTR is very poor. I want to unlock all hidden options like undervolt (and battery control calibration?). Can someone unlock my bios?
    • By iamconstant
      Hello, I have bought an empty case and assembled parts of Clevo P775DM1. Basically the laptop had no display or MXM Gpu or CPU. For test case I had a CPU lying around G3900 and put it in. I also have mxm gtx 965m Clevo card. I also have installed screen from alienware laptop 2k resolution 120hz. Now the problems.
      1) The laptop boots without a hastle. But as the nvidia drivers load the screen goes black and stays like that. At first I thought the GPU was dead but the external screen worked. Then I though maybe there is a problem with GPU not being recognized or something. Downloaded GPU-Z and every sensor is working fine. I tried saving vbios file and suddenly screen turned on. It probably disconnected the GPU and reconnected it again and as long as the laptop is on, GPU works without a problem. But if I restart it, the laptop screen turns black after boot and external works fine. That's the first problem.
      2) The second one is with Ram and I don't exactly understand the problem. I have 2x8GB rams 2133. single channel works without a problem, but when I try to use both of them the laptop does not boot at all. Won't start fans just blue led keyboard lights up. in single channel both rams work with no problem. And I've tried both slots, since the laptop has 4 slots. Still not working. If you can help with any of the problems, it will be much appreciated.
       
      p.s. I have recently bought the laptop and haven't really figured out anything around it. if you have any extra pointers/bios mods I'd really appreciate it as well.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.