Klem

Merry Xmas to you too! Your new bios mod done. I sent it to you in PM.

Hi! Yes, it's correctly flashed mod vbios.

Hi! Ok. Your bios mod done. I sent it to you in PM. Hi! Ok. Your bios mod done. I sent it to you in PM.

Ok. Check PM.

You posted just screenshot, but I mean file vbios from your card.

Hi! Yes, you can send me (via PM) your bios dump which was made using any SPI programmer, or upload it to any fileserver ( for example https://www.sendspace.com/ ) and send me the link.

Hello! Ok. Your bios mod done. I sent it to you in PM.

Hi! Ok. Check PM.

Hi! Ok. Check PM.

Hi! No, it's impossible to set the gtx960 graphic adapter as the primary, because Y50-70 use Optimus technology. Unlocked bios can't help in this case.

For your card you need this vbios: https://www.techpowerup.com/vgabios/164186/164186

Because FF it's wrong value, A2 it's correct version. Only two variants: 1. Vbios for some reason corrupted. You need reflash it. 2. Your Nvidia card died.

Hi! You can download vbios 80.04.FA.01.07 from this link: https://www.techpowerup.com/vgabios/179377/179377 But i think that in your case you need just reinstall Nvidia drivers with enabled option "Clean Install". Or use DDU utility, completely uninstall all Nvidia drivers, then install it again.

Just read "User Account Promotion Rules": As part of the move to our new platform, we did away with the 5 post moderation queue (where new members posts were put in an approval queue) and now all new member posts are not prescreened and immediately visible when posted. However, to maintain a steady stream of quality content on these forums, we have added user account promotion requirements which work a little differently than before. Upon registering for this website, your account is categorized as "Pre-Promotion" and you can see that status below your avatars. Once you have participated in the community sufficiently over the course of a week , your account will become flagged for review and at that time the T|I moderation team will review your post history over the course of a week and promote you accordingly--as long as you didn't break any forum rules or make spam posts, you are 99.9% certain to get promoted. At that point, as a Promoted User, your account will have full privileges to download anything you like and have enhanced account features enabled such as increased PM quota, increased per post upload quota etc. If you cannot wait for this promotion period, then we encourage you to subscribe for T|I Elite Membership as it will provide you with an immediate account promotion and you can then download what you wish. Attempting to circumvent these rules set forth are grounds for infraction and/or termination of your account privileges as it is a violation of our terms of service that you agreed to when joining Tech|Inferno forums. In summary: New user account promotion system that views your level of quality activity on these forums over a span of 1 week with a minimum of 5 QUALITY posts. Once you have sufficient activity over this week, your account is flagged for moderator review. At that time you will get promoted as long as you had quality posts and didn't violate forum rules (e.g. spam posts, one liners, file begging, complaining etc.). Apart from a few odd members that break the aforementioned rules, almost everyone is guaranteed a promotion. If you do not wish to wait for this promotion queue, you can simply opt for T|I Elite Membership to skip ahead and get your account promoted as long as the membership lasts. Attempting to circumvent the aforementioned rules may result in an infraction and/or ban. Please review our terms of service. We feel this is the best compromise we could come up with to maintain our standards of quality for this website and to ensure our limited resources are used optimally. Thanks, T|I Team

This thread only for bios unlock requests, not for discuss about laptop! Don't try to change any Voltage Offset in the BIOS, it can break your laptop! To undervolt CPU just use software like Throttle Stop utility or Intel XTU utility. Try read this pages: Be careful with change any settings in bios setup menu! Before you change any settings in bios, you must absolutely exactly know what you want change and how! Don't try to disable Intel graphic card! If you set any settings to wrong value, then laptop break and can't start!

Hi! Tell me, if you see in bios setup menu the setting "IOUT SLOPE"? Try to search it in CPU related settings.

Hi! Unlocked bios for your laptop model already prepared. You can download it from the first page of this thread.

Ok. Thanks for your feedback.

Hi! Ok. Check PM.

Hi! Ok. Check PM.

Hi! Ok. Check PM. Hi! Done. Sent it in your PM.

I think because old version.

I don't know. I think that may be seller reflash M2000M to M2200M with hardware SPI programmer.

Well, try use this Nvflash version: https://www.sendspace.com/file/ojzz04

Try use command without --index=0 Just type nvflash -6 GM206.ROM