Binarious

I have a dead 1060m with a good core if that would help.

Still no replies? I eventually got it working, but now I need to update my driver and I'm having difficulties modding the new driver. If someone can help me out I will appreciate it very much.

Have you tried installing it yet? I am pretty sure this will work, but you will likely have to use a modified .inf at the very least.

Did you ever get this to work? I have a Clevo P750DM-G that I installed a Quadro p4200 in, and now I am trying to run an external monitor with it, but none of the ports will output a signal.

I bought an eeprom that was advertised as being programmed to work with a P4200 in a Clevo computer. I soldered it on and installed the card in my P750DM-g. The screen came on, and it seemed to be recognized by my system, and HWinfo even saw it as a P4200. When I installed the driver, the screen went black for 5-7 minutes then came back on all scrambled. I did a system restore then went for it again with a different template using NVCleanstall 1.7 and using my hardware info from device manager, but the same thing happened again. I would appreciate some help with this. If someone has a known good vBIOS, that might be helpful here, I'm not sure what to try next.

With a little help I got this to work. I can verify that the quadro P4000 works quite well in a Clevo P750DM-G and it is faster than the GTX1060. It handles 3D programs noticeably better in real-world use.

I installed an NVIDIA Quadro P4000 Max-Q in a Clevo P750DM-G. Device manager hardware ID shows: PCI\VEN_10DE&DEV_1BB7&SUBSYS_75021558&REV_A1 I have done the standard inf file mod, then disabled driver enforcement as I have done successfully in the past, but it's not working this time. The install starts, then fails less than half way through. I have tried the DCH version, standard version, and studio versions and none of them will work. I am probably missing something. Could it be the result of the vBIOS? Below are screenshots starting with GPUz

What is version 3.0 supposed to have that's different? Also, is this any different than the Prema BIOS?

I just bought a Quadro P4200 mxm with the intention of putting it in my Clevo P750DM-G. It hasn't arrived yet, but I'm trying to plan this out a little in advance. Has anyone else put a quadro in any version of the Clevo P75x? If so, which vBIOS did you use and did you encounter any problems? Thank you

I'm curious if you ever did this upgrade with the BIOS mod. If so, how did it go?

It worked, you're awesome! I would love to know exactly what you did to get it to work right. My 3DMk11 graphic score went up 13% from: 12335 with an overclocked 980m to 14558 with this stock 1060. The only thing that's weird is that 3DMark11 shows "generic VGA" for the graphics card. As long as it's working properly, it's not a huge deal, but it's a curiosity. Any idea why it's like this? Thank you again!

I got the NVIDIA driver to install, but it only installs the HD Audio portion and not the graphics card part of it. I need this for work and I'm about to put the 980m back in at this point. I'm running Windows 10 I have not yet received help from this. If anyone else knows what I can do to resolve this I will appreciate it greatly. I wasn't expecting these problems and need to get it ready for work asap.

I believe I modded it correctly, and also disabled driver signature enforcement, but it's saying something about not having permissions. Then when I enabled permissions and got it to run, it said installation failed. It's driving me nuts. I know others have gotten this card to run in this machine, so I know it's possible, but this is driving me nuts. Thank you again for the help!

I appreciate this very much, thank you! Hardware ID: PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1 Device instance path: PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558&REV_A1\4&62B0C4E&0&0008

I just installed a 1060 mxm card in my Clevo P750DM-G and the laptop recognizes it and installed the The NVIDIA driver says it cannot find compatible hardware and won't install. So far I have used the Display Driver Uninstaller, and also tried to mod the .inf file with: %NVIDIA_DEV.1C20.7502.1558% = Section002, PCI\VEN_10DE&DEV_1C20&SUBSYS_75021558 with the corresponding subsequent string at the bottom of the driver file as well. When I tried to run it with driver signature enforcement disabled it failed. What am I doing wrong? A little help will be appreciated. Thanks

I'm curious if it's as simple as adding more ram chips, or if there are other necessary mods that need to be done. I'm sure someone here will have an answer for this. I'm attaching a pic of the card in question. Thank you in advance

I hope to eventually get results in this thread, however, I have since found a good deal on a used 6700k that I am very happy with. However, now my GPU seems to be having slow issues... Always something.

I just upgraded to the 6700k from the 6500 and though it's faster and benching higher, it's still having the same instability issues. The frequency and temps fluctuate greatly in the 3D programs I use and it's driving me nuts. I'm going to do a fresh install of windows and hopefully it resolves this.

Which vBIOS is best for the gsync 980m 8GB for the Clevo P750DM-G with 330w power supply and Prema's system BIOS? Thank you,

Anyone? Baked, if you are reading this, I will appreciate it very much if you will please let me know if your BIOS will support Kaby Lake processors. Thank you in advance

Does the Baked v2 BIOS for the p750DM-G offers Kaby Lake support? I want to run a 7700k in this machine. If anyone can confirm this it will be greatly appreciated!

I'm partial to Prema's mods, but there isn't one available and it might be a while yet, so I am hoping there is an alternative at this point. I've seen the Baked V2 BIOS mod for this model. Does anyone know if it has Kaby Lake support? Can anyone vouch for the stability of this BIOS in general? Thank you in advance!

Considering the 870dm-g has the same z170 chipset as the P750DM-G, and knowing it is definitely possible to run the 7700k with the right BIOS, I'm a little surprised it hasn't been done yet. This generation of Clevos got the shaft in a big way and it's irritating. At the same time, the 7700k isn't that much faster than the 6700k, however, I have found better deals on the 7700k. If someone can find the time to cook up a stable BIOS, I'm sure there will be plenty of followers who will support his or her endeavors with a donation, as I know I will.

I would like to know the same if you found the answer to this. After doing a fair amount of research, I came to realize that I need a Quadro rather than a Geforce card for the 3D design work I do. I don't really game anymore, so no need for GTX. Also, do you, or anyone else know if the m5000m or Tesla m6 will work in a clevo p750dm-g? Thank you in adance

Anyone know if it's possible to get this 1060 to work in this model? It fits, and this laptop is without optimus and has eDP. I believe it only needs to be accepted by the BIOS. Thoughts? http://i.ebayimg.com/images/g/toEAAOSwB09YEtnA/s-l1600.jpg