Arise

Did you went over every 2 pins and checked for continuity in them? Also, the socket plastic seems melted, not everybody can do it, is not hard I guess but is not something everybody can do it. Last thing... could there be a custom bios required/custom bios options to unlock both banks of memory or maybe some small resistors/capacitors around that are missing as well?

When I shorted the first pins (my laptop was just fine before that) it made it not booting. When I shorted the other pins I was able to boot. From my testing those jumpers will clear the CMOS data (whatever that means) and the time. But it will not clear NVRAM settings (stuff you mess up while in BIOS menus) so it will not help with making your laptop bootable. I consider bricked a laptop that displays nothing on screen. Keyboard could light up or... no.

You only need one file, but assuming your "desperate" situation, I will assume you will try both names anyway, whatever it works. Try maybe with a different USB stick like mentioned above.

Either of them should work, add one to a USB stick and try with Ctrl+Home then Power button. Filesystem of the rescue drive should be FAT32. If not working, then try with another stick. Or a sdcard in a cardreader. Eventually it should work...

You can find PhoenixTool on digital life forum or on the net. When you open the recovery BIOS file in PhoenixTool it will show a popup with the recovery file name that must be used. Shorting JRST2001 for me actually bricks the laptop, to unbrick it I also have to short the JRST2002 pin. Cant say exactly what is doing, didnt investigated much as I discovered it won't help me with the NVRAM persistence.

Try the Ctrl+Home pressed and while keeping them pressed press power button. It should hopefully attempt to boot from USB stick and reflash the bios. The bios must be on a simple USB stick formatted as FAT32. The filename for recovery can be obtained with andytools. If this will work you will see the usb led for activity flashing differently than usual. So if usb is flashing then is only a mater of matching the filename/firmware. Sent from my iPhone using Tapatalk The other option would be the recovery using a SPI chip programmer. Sent from my iPhone using Tapatalk

What bios you have? Sent from my iPhone using Tapatalk

You have to make the eGPU detected. How is you eGPU reacts when is powered on? Does it spins its fans? Leds up? Any sign of activity? Sent from my iPhone using Tapatalk

Most probably yes, thunderbolt is like a cascading of pci devices, and makes it even more complicated to fit every device in the pci space. There could be an option to make it easier or plug and play, but it requires a bios mod (to alter tolud and thunderbolt options). Im working on a bios mod for this but is not a top priority, i will let you know my findings. Sent from my iPhone using Tapatalk

You will need setup 1.3, or at least a way to prevent windows from loading, like pressing F8, and waiting in the menu. After that you can power on PE4L, and see what happens. Sent from my iPhone using Tapatalk

I managed to get my G750JW working over thunderbolt. How are you connecting your egpu? Sent from my iPhone using Tapatalk

You can, but I recommend to override the DSDT first by using setup 1.3. Only if it works then you can think about modding your bios. Sent from my iPhone using Tapatalk

What platform you have? Changing brightness could be possible, but if macos is doing it accessing the ACPI space and overriding the function bodies in dsdt then you will need to do same in windows. You can probably try to edit the dsdt directly in BIOS and boot with it or try to override it like nando describes in egpu tutorials. Sent from my iPhone using Tapatalk

Probably uou need a fitc for your motherboard series. Sent from my iPhone using Tapatalk

Couldnt find a better solution at that time. So I went ahead and made that hole to let the extender non flexible part some space. Sent from my iPhone using Tapatalk

I cut with the dremel in the bottom of my CM120 so I can make room for the extender to go through and return with the cable back. Sent from my iPhone using Tapatalk

After some more testing I can say that shorting JRST2002 and then JRST2001 will reset the system date/time back to 2009. But the settings in BIOS will be preserved, those are not erased.

I did a lot of combinations (without battery, with and without power cable with and without CMOS battery inside of laptop). It seems that if the CMOS battery is installed, with no other power, then shorting the JRST2002 will make the laptop not POST-ing. If I short the JRST001 it will unbrick it. If I remove the CMOS battery, then if there is no power cable or battery it seems I lose the date/time. But all other options are preserved in BIOS. Shorting JRST2002 will do nothing it seems without that 3.3V CMOS battery. Shorting the JRST2001 will make the laptop reboot if the power cable is on, but no BIOS changes will be reset back to default values. So... right now I am stuck, don't know if those jumpers are working as they are supposed on Asus G750.

I can confirm those two jumpers are next to the user replaceable memory sockets on Asus G750. Sent from my iPhone using Tapatalk

G750 bioses worked for me to dump the memory with fpt, but cant remember if i had to unlock something first or it worked out of the box. Sent from my iPhone using Tapatalk

I think is better to file a letter to EU comission for fair concurency, and explain to them that Lenovo is actively blocking various manufacturers products to be used in their laptops. If they get an injuction on selling their all laptops in Europe, maybe they will stop with whitelisting the ports. Sent from my iPhone using Tapatalk

How did you managed to unlock the chipset menu? I tried to do that but is not visible for me I think. All options (all of them, not under category are under a blank menu item, but im asking only for chipset if you did something special. Thanks. Sent from my iPhone using Tapatalk

Not that bad but it is supposed to do at least 4.5GHz with a little bit of cooling help according to Dufus. Did you tried to repaste it already? The voltage you set was with the offset or fixed?

58W is a value that implies that the cpu is in full load, or at least stressed with something. At first you should try only raising the multiplier and validate the frequency. After you do that you can switch back to the tdp rating? What laptop do you have? What is the temperature when you have 58W in load? Sent from my iPhone using Tapatalk

I think 01 or 02 are good candidates. Ive tested with 06 microcode and that only allowed me to go 36x on all 4 cores at the same time. (By default 4700hq/mq can do 36x only on a single core). Still a nice improvement of +200MHz, but if you want more you will have to go with a lower version. Cant remember if those +200MHz can be used from XTU or you still require throttlestop. Sent from my iPhone using Tapatalk