I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
Hey i have an idea to change my old msi gx720 laptop Motherboard to one from a msi gx740 they look to have the same cutouts to screws and both laptops chassis look to be the same with outputs and that so my question is do you guys think it is possible to do it
msi gx720 motherboard – Google Søgning msi gx740 motherboard – Google Søgning
Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
I have a iBuypower CZ-17 laptop, with a 2012 AMI BIOS that has E1762 as the version, which I believe means I have an MSI G70 motherboard. It has a 675MX GPU, but it's not useable in Windows 10 despite being "seen" in the device manager. I believe an updated, unlocked BIOS would fix my issue and have located the thread on this site with the BIOS I need.
First of all, am I right? Will this fresh BIOS make my laptop that originally ran Windows 8 work with this old GPU?
And second, I created this account, will wait 24 hours and made this post. Is that enough to allow me to download the file, or do I need to post elsewhere?
Hello all! I have been researching upgrade paths for my M17x R4 and I have decided on the GTX 1060. Now, I was given this laptop with a dead GPU, and I had an M17x R3 already. So I moved the GTX 560m into the R4 which has worked fine. Now as I understand it a few things are needed for this upgrade including the 120hz panel and the ability to disable the legacy ROM for a pure UEFI boot. I have the 120hz screen, but the 560m uses the GF116 architecture which does not have a vBIOS which supports GOP. So I am thinking the only solution is to buy a cheaper "in-between" card which supports both boot modes, which will allow me to disable the legacy option in setup. Does anyone have any suggestions as to what cheap card to buy as a transitional part? I have been considering a 765m but I am also wondering if there are any other good choices.