I recently purchased a replacement 980M (Clevo model) for my P770DM-G after the original died, however, after installing the card the laptop doesn't boot. I only get a black screen, and after a couple minutes the fans spin to max before shutting down, which is the same thing that happens when I try to boot it without any gpu at all. I've tried the reset procedure, unplugging, removing battery, and removing CMOS, to no avail. It does beep before shutting down (I counted 22 times exactly). Anyone have any insight as to what the problem is?
i have m18x R1 model with A05 unlocked bios and i try to connect ati mobility 4870 card/s.
I read ton of posts but people that seem to have similar problem with different card didn't post any solution. Case is when i connect 4870 i get black screen and 8 beeps.
When i use only integrated graphics (no cards installed) laptop is starting normally.
When i use integrated graphics (nvidia card installed as master) laptop is starting normally.
When i use nvidia card installed as master laptop is starting normally.
When i use nvidia card installed as master and ati 4870 installed as slave laptop is starting normally but in devices manager i see there is error 10 with ati card.
When i use ati 4870 card installed as master i get 8 beeps and black screen.
I tried to google for answers but unfortunatelly didn't find any. Do you know if that old card can work in m18x ? Maybe it's not supported at all? Do you have any ideas what else can i try?
Help me Tech Inferno, you're my only hope.
Ok so firstly, apologies for yet another 8 beeps thread. I must have read 100 of them over the last week. I feel like I'm missing something obvious, but I'm totally burned out after days of working on this so would appreciate some outside perspective.
I live in the UK, so I've avoided buying a 980m to upgrade my 660 for years to due the price/import tax etc. I finally found a good priced 980m on Ebay a few weeks ago so I thought why not give my trusty 18x r2 a few extra years of life.
I ordered the 100w heatsink, x bracket etc from Eurocom at the same time and everything arrived on the same day.
Here's what I've done so far in the last 7 days:
-Flashed unlocked A11 BIOS (I rolled back to Dell A11 first)
-Removed 660m and installed 980m
-With BIOS in Legacy, Installed Windows 7 on a new SSD with BIOS set to IGFX
-Tried to switch to PEG but got 8 beeps so reset CMOS battery
-Switched to SG and booted to Windows. 980m detected as default hardware. Installed 980m Driver from Eurocom and restarted. Device manager shows 980m working normally along with HD Graphics 4000. Tried PEG again but still got 8 beeps
-Reset battery, booted to Windows and disabled the 980m in Device Manager
-Flashed VBIOS from here (I read that the dell VBIOS doesn't work well so tried Clevo one first, but I've since tried both and a few others)
-Re enabled 980m and restarted Laptop still in Legacy SG.
-Tried to test a game but they only want to use HD Graphics 4000. When I try to open NVIDIA Control Panel and change some settings I get a blue screen and have to restart.
-Tried PEG again, still 8 beeps
I've tried many combinations of drivers, VBIOS and BIOS settings over the last week but the result is mostly the same. I get 8 beeps in PEG. I thought perhaps the seller had sent me a G-sync version as I have read these don't play well with PEG, but I checked the hardware ID (PCI\VEN_10DE&DEV_13D7&SUBSYS_05501028&REV_A1) and what I've read seems to indicate this is the Non G-Sync card.
I got the 980m rather than the 1060 after reading the forums as I saw so many success stories I figured it would be the safer option.
I understand this laptop is basically dead to most of you now, but if any techsperts are around and could give me some other things to try I'd greatly appreciate it.
I have a g750js with gtx 870m, I upgrade it to gtx 880m when the laptop boot it's not recognize the gpu and the fan turn at the high speed.
The laptop turn with windows 8.1.
Can someone help me please ?
Sorry for m'y poor english.
I have installed my 980M on myR2, Got the 8 Beeps, I thought with the A12 BIOS and Windows 10 it should have worked. Oh well, going to tear it back down and put the 675M's back in. Ijust got promoted and am downloading the A11 unlocked BIOS . So, Next teardown I am going to be completely ready. I just want to get this in and see if I can get it working before my return window passes. I have posted a few places here, and on Notebook Review on several threads about this stuff, and have received one response. Is this site still active? Do I need a modified driver still, all that stuff looks really old, 2013-2016 type stuff. I need to know about 2018. I have read that Nvidia added support for the maxwell in m18x r2. Am I wrong? Can someone offer advice? I have read that this thing should have been plug and play with windows 10 on Eurocom, Do I just need their driver? PLEASE HELP!!! Thank You!!!