Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

so my old G75VW is needing some upgrades, i have a bunch of options:

 

  1. Motherboard swap using a G75VX motherboard with thunderbolt to get a thunderbolt port + akitio thunder2
  2. Using some mad casemodding skills to fit a GTX880M + heatsink(from a G750), vbios mod(some help needed)
  3. Exp gdc maybe with a GTX 1070 or 1060
  4. Sell it and buy a clevo or alienware
Edited by RaikoX

Share this post


Link to post
Share on other sites

I'd go with #4, or just pickup another ASUS like I did. The BIOS chip, at the very least, on my G75 died and I upgraded to a GL502VY and it's just heavenly. Lighter, faster, less headaches all around. The G75 definitely isn't worth saving IMO. Keep it around as a backup, if anything. Or, give it to a family member.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By ajdrenter
      Hello all! I have been researching upgrade paths for my M17x R4 and I have decided on the GTX 1060. Now, I was given this laptop with a dead GPU, and I had an M17x R3 already. So I moved the GTX 560m into the R4 which has worked fine. Now as I understand it a few things are needed for this upgrade including the 120hz panel and the ability to disable the legacy ROM for a pure UEFI boot. I have the 120hz screen, but the 560m uses the GF116 architecture which does not have a vBIOS which supports GOP. So I am thinking the only solution is to buy a cheaper "in-between" card which supports both boot modes, which will allow me to disable the legacy option in setup. Does anyone have any suggestions as to what cheap card to buy as a transitional part? I have been considering a 765m but I am also wondering if there are any other good choices.
    • By depmixels
      hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
       
      I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
       
      But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
       
      Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
    • By damianalex
      Hi,
      I want to show you my new project.
      I bought my laptop about 5 years ago.  It was never speed deamon, but for every day use, it was enough to me.
       
      Its specification:
      Intel i7-4700MQ
      Nvidia GeForce GT745M
      16GB RAM
      512 SSD Adata SU800

       
      Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
       
      So I make a decision to buy external grahpic card.
      I choose GTX970 and now I am looking for occasion to buy it.
       
      I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.

       
      I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
       
      My plan:
      1) unlock bios
      2) buy GTX 970
      3) enjoy Witcher 3!
       
      BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
       
      1) laptop on table, playing GTA V 1080p

       
      - first minute (GPU core 1045MHz)

       
      -after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)

       
      2) with thermalpad Glacier NC400 SilentiumPC

      - 30 minute and longer (GPU core drop to about 900MHz)
       
      3) without down case of laptop (like on picture with thermal paste) on thermalpad.
      Here laptop never drops down MHz and max temp are about 72 Celsius degrees.

       
       
      Bacause of that I bought second down case for my laptop and I will cut there additional holes.
       
      Greetings!
       
      I will describe next step when I get all stuff I need!
       
       
    • By popozitos
      Hello everyone
      I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
      Now I created another one for the GPU with an external Xbox 360 203w psu.
      the finish was not good but for my use it is already good.
       
      *both cases album
      *Construction of the second case 
      *adapting xbox psu to 8pin power (taken from 24pin)
       
      all made by hand with the tools I had.

      from Brazil.

    • By Consumerofmulch
      Hello!
       
      I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
       
      thanks.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.