Jump to content
WaY977

2014 15" rMBP + MSI GTX1070 OC@16Gbps-TB2 (AKiTiO Thunder2) + Win10 [wayne]

Recommended Posts

First and foremost: this is a HASSLE-FREE BUILD.

You will not find creative schematics, acrobatic soldering, custom BIOSes or anything like that: this is pure "just works eGPU" with Win10 bootcamp and an external display (so, no OSX support and no internal monitor either)

 

Let's begin!

Hardware:

 

 - Macbook Pro Retina Mid 2014 with nVidia GT750M

 - Akitio Thunder2

 - MSI GTX 1070 Armor 8G OC

 - Dell DA-2 12V  (ended up not using it)

- Old Corsair 540W Modular PSU

 

Setup:

 

None. Absolutely no software setup. I had my previously working Win10 bootcamp machine installed, and it was a regular, apple-certified, Win10 installation done via bootcamp assistant, so no UEFI workaround or custom BIOS.

 

The works

 

oxu2tJV.jpg

 

Got my Akitio, unbox and open. Just 2 screws and voila.

 

fxMtnep.jpg

 

Removed the back plate (4 little screws)

 

IEwIgv4.jpg

 

I unplugged both the fan and the led cable and removed the glued support for the cable, you can still see the glue

Removing the fan was just a matter of removing 4 screws, the LED light took just a bit of force and it popped out of the socket.
Here's all the things from the Akitio you will not use.

 

zcayO04.jpg

 

As you can see from the hardware list, I decided to go with a full sized GTX card, and not just a full-sized one, a pretty big one at that.

The MSI GTX1070 Armor OC does not have any LEDs or fancy things, just 2 big (and quiet) fans and that's that.

 

O6X4O8z.jpg

 

So, of course, I had to bend the Akitio to make room for the card.

I went with the "jeweller's screwdriver" technique. Fast and easy: just put a little flat screwdriver near the soldering at the bottom of the enclosure and work your way in lightly with a hammer.

Took me 1 minute and the little solderings popped open.

 

5cqSkPL.jpg

 

Now it was just a matter of applying a bit of brute force and bend the enclosure open.
Not pretty, I know... but I'm not looking for pretty. Besides, the card is so long it covers the bent enclosure and then some! :)

 

3M9OaJA.jpg

sIU1CSl.jpg

 

I gotta say, I was getting pretty impatient at this point.

I put the card in, adjusted the two screws to set it in place and checked the spacing between the card and the bent enclosure. 
Everything was in order. Not pretty, again, but in order.

 

mPF2xKw.jpg

95wjFNj.jpg

 

At this point, I encountered a little snafu in my plan.
I had bought the famous Dell DA-2 to power my GPU.. turns out this monster of a card has an 8 pin power slot, not a 6 pin one.

Huh. Now what? 
Remember, this was supposed to be a hassle-free installation, no soldering or complicated workarounds.

 

I remembered I had an oldish PSU from my desktop era sitting in a closed, took it out, plugged it in and got a nice 8-pin cable to power my GPU.

(of course I had to use the paperclip-trick to power the PSU, but it's so basic, I'm not counting that as a hassle).

 

WD4EJqU.jpg

jyppa5z.jpg

 

To power the Akitio, since this a... let's say it again, everyone... hassle free build, I didn't want to use any custom made barrels or anything, so I used the original PSU, plugged it in and that's it.

It was time to power it all up and see what the future brings.

Thunderbolt cable connected, external monitor plugged in with a displayport cable, everything powered up... turn on MBP: nothing. Black screen.

 

Huh.

Powered down, tried to plug the thunderbold cable in AFTER the boot.

Got a "hey I found something" sound from Windows, but nothing else.

Reboot.

Now the MBP started in Bootcamp, and Device Manager said there was a "Microsoft Basic Display Adapter".

Bingo!
Downloaded latest nVidia drivers, gave it a go: oh, damn! I have 2 video cards!

 

Rebooted again

The external monitor came to life, so I closed the lid on my MacBook (I'm using it in clamshell mode, I have no need for another screen) and there it was.

With this solution, you don't even need to go and disable the "internal" 750M,

 

Didn't have the time to make a 3D Mark benchmark, yet... but these were the settings of my WoW client yesterday

 

lYE9nIy.jpg

 

and @2560x1440 with all ultra settings I had 67fps. Not too shabby :)

 

Future implementations:

 

- power the Akitio via the barrel to remove an external PSU

- organize cables and spaces

- switch PSU: this one has a terrible case of "coil whining", it looks like I'm skinning a cat...

- IF I ever have any spare time, try and put everything inside a box: I'm thinking of one of those ikea metal boxes... 

 

Thank you all for your help and... comments appreciated! (everything but: "it's ugly!". That one I know :D )

Edited by WaY977

Share this post


Link to post
Share on other sites

13/01 Update

Switched PSU: old Corsair had a terrible case of coil whining. Got a cheap Seasonic (60€ from Amazon): perfect.

Share this post


Link to post
Share on other sites

Hi,

how did you attach the barrel to the PSU? I would also get rid of the Dell DA 2 12V coming with the Akitio.

Thanks

 

My setup:

MAC pro retina 2015 15"

Akitio Thunderbolt 2

500W EVGA psu 80+

EVGA 1060 Super Clocked 6GB

Share this post


Link to post
Share on other sites

Hi,

 

I have a Macbook Pro 15 (Mid 2014) with integrated graphics only.

I am using a Zotac 1060 and able to boot into windows 10 on external display and installed the graphic driver successfully.

However, I realise after about 5 mins, the screen will turn black or sometimes white and hang there. When this occurs i cannot do anything but to force shutdown the machine.

Did you have this issue?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By duffman_777
      Managed to find a relatively cheap MSI 1070 on ebay, and after reading a few success stories that 1070's are compatible I decided to pull the trigger. 
       
      Modified the bottom case as per the photo on this FAQ page http://www.eurocom.com/ec/faqs(272)ClevoP150EM_SagerNP9150_XMG_P502_PRO. Things were going well until I went to screw the card down and felt some resistance.
       
      Oops. Looks like that capacitor(?) with the blue on it *just* clashes with the card. Now what's weird is not all P150em motherboards seem to have this component on it - looking at replacements this component is not there. Also looking at the photos from this 1080m P150em mod (https://premamod.wordpress.com/2017/10/10/clevo-pascal-mxm-standard/), this component isn't there either. Does anyone know what this is, and if it can be removed? Or, if this could be taken off and shifted out of the way somehow, or replaced with a smaller equivalent...?
       
      In my disbelief/annoyance/problem solving when trying to push it down, I did notice that the card has a surprising amount of flex in it and it *can* be screwed down almost completely to a level where I feel somewhat comfortable in doing... Though I'd rather not put this strain on the card if there is a way to avoid it.
       
       
       
       
       



    • By BAKED
      Hey y'all! I'm planning on releasing BIOS mods for the newer MSI laptops.
      So I'm looking for some testers to evaluate my mods and give input.
      If you're interested just PM me and we'll take it from there 
    • By BAKED
      There are several threads on requesting BIOS modifications here on T | I but I thought another one wouldn't hurt.
       
            Your request should look like:
      Brand Model Type of modification(For example: Unlocked, added support, Logo, microcode, ME firmware etc  
      I'll respond as soon as I have time as I'm also currently working on other projects(Requests by PM is also ok)
      If anyone else have the knowledge and time feel free to respond to requests 
       
    • By aBug
      Hello Everyone!
       
      I have problem with VBIOS/EEPROM(?) after installing of a GTX1060 N17E-G1-A1 GPU NVIDIA Graphics Chipset (old one has temp. damages). 
       
      I  modified new 416  and old 391 nvmii.inf file and try to install drivers, but every combination gave me no success. There is only yellow triangle in  Windows Device Manager :|
      Is there a way to bring my card to life?
       
    • By Psycha
      Hello, I'm on an alienware m17 r4 and am trying mod my vbios for a 970m 3GB msi. I've managed to get the max boost with an increase in voltage, however I believe my voltage settings maybe unstable. When attempting to load programs capable of high gpu usage capabilities, the gpu begins to become pretty unstable. would anyone be able to provide assistance? I have both my edited and original roms as well.
       
      *update
       
      I'm not sure how to delete this thread but disregard this please. I've figured out the issue.
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.