I have tried to update nvidia drivers of my notebook ge72vr6rf apache pro. The only drivers that works are the ones provided by the msi. The problem is that they haven't updated those since 2016 and I can't play newer games.
Some say you need to mod your 1060 drivers, which I have no idea how to some says you need to update the flags in ini files. So please help me
Thanks for your time.
I am an owner of MSI GT70-20C and my GTX770m gpu i now dead.
I have a question and i hope someone will help.
I have ordered GTX 970m 6GB DDR5 and i cannot find the exact vBios for that graphic card.
My current bios version is: E1763IMS.51B
Thanks in advance,
By Malik Fasihullah
Hope you all are doing well. I wished to ask if someone could guide me for flashing a vbios to the GTX 970M 6GB for to be installed on the MSI GT-683 laptop (with modded GTX 560M heatsink). I need to know how to get a display to be able to flash (also, flash with what software?) if the gtx 970m is of clevo (is the IGPU supposed to work? do i need an unlocked laptop bios?) I intend to buy this GTX 970M : https://www.aliexpress.com/item/4000264805962.html?spm=a2g0o.productlist.0.0.62d77e93DGQl5O&algo_pvid=bccc80d9-9944-4dc3-a1e6-ef3d45bda0e3&algo_expid=bccc80d9-9944-4dc3-a1e6-ef3d45bda0e3-5&btsid=12b502b9-dbe1-4c35-be48-930446a31235&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_53
Please help it will be of great service to me.
Regards- a new member.
@Bloetschkopf your expertise please..
I reversed the input polarity on my m15x jack after a botched psu repair. Computer worked fine, but overall power control is messed up. System only boot on both battery and psu, no battery charge, and a very low battery drain (arround 6wh).
I aways had battery issues whith my 8 years old m15x after my original battery died. Bought a new one two years ago, didn't work. Checked on upower, basically no info on manufacturer, power or history. So i refunded and used the system hooked on the psu as usual. In August i bought a new one, worked flawlessly for a day. The next day the battery died from nowere. Checked upower, bus was ok, battery was charging extremely slowly (6wh), history showed subpar disharge before shutting down. I got mad at this point, decided that psu was to blame. Opened it, checked everything, noticed some wear on the male jack. Resoldered it, connected on computer. Nothing happened, so i checked the voltage. That's when i realised that i screwed up big time. I swaped the positive and negative wires. Decided that one mistake was enough, so i sent my m15x to a trusted repair shop (latter found that they just hooked the battery and gave me back as soon as it booted, they didnt even open it). Got my pc a week later, but the battery didn't charge . Worse, it was slowly discharging (same 6wh as before), and it needed both the psu and the battery to turn on. At 65%, it worked as usual for my college semester, but the battery is dead, and so is my computer. I bellieve i burned some voltage controller or something. I'm pretty competent at soldering thing's (evem smd components) when i know what to do, and i can understand simple circuit's, but when i got my hands on the m15x datasheet i got overblown. I cant make heads or tails about it. I aways lurked this forum and i bellieve your guys are the best when it comes to finding creative solutions to technical problems concerning microelectronics. I followed a guide in this forum as a teenager to upgrade this same computer to a gtx680m, overclocked stuff, got custom bios, and had a lot of fun learning. The m15x is a deprecated platform, but it's a part of my history that i dont want to let go.
So please guys, help me.