Jump to content
  • Sign in to follow this  

    Samsung Secures Win For AMD Greenland Production


    Brian

    South Korean site etnews reports that AMD's next generation Greenland GPU, scheduled to be released in Q2 2016, will be produced by both Samsung and Global Foundries using 14 nm FinFET LPP. Since both Samsung and Global Foundries share a common IP for 14 nm LPP, AMD will be in a position to leverage both of them for maximum production capacity. 

     

    TSMC, which traditionally produces GPUs for AMD and it's rival NVIDIA, lost AMD's contract due to it's inability to keep up with yield and supply demands.

     

    Quote

    AMD had been asking TSMC from Taiwan to be in charge of GPU production but it decided to cut contract with TSMC with 28-nano being the last production after issues with yield and instable supplies had continued . -etnews

     

    Greenland is expected to offer 2x the energy efficiency of the current GCN architecture and is AMD's direct competitor to NVIDIA's Pascal. 

    68a9582b379c86adddf985e1fa9ee8a0.png.cd3

    GCN-FinFET.png.bf9914ce975652e348552ce29

    Source: WCCFTech

     

    This is yet another win for Samsung which has managed to steal back Apple from TSMC and will also be producing chips for Qualcomm. It will be interesting to see whether AMD being on 14nm LPP will give it any advantage over NVIDIA who reportedly will be using TSMC's 16nm FinFET+  for Pascal. 

    Edited by Brian

      Report Article
    Sign in to follow this  


    User Feedback


    There are no comments to display.



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Similar Content

    • By Mnky313
      To anyone wondering about eGPUs on M6700s, its not too complicated, there is just a process that must be done on boot every time:
      You need to have the eGPU connected and powered on before booting the laptop, once you get to the Intel RAID screen disconnect the eGPU and wait for windows to load up, once windows is loaded reconnect the eGPU and you *should* be able to use it and be able to hot-swap it (though you should disable it in windows before unplugging it) installing the normal AMD drivers worked fine for me, though the original release of Adrenaline 19.1 blue screened the first time.
      I usually run with 3 1080p monitors attached to the 480, replaced my old i5 desktop with this laptop due to the convenience of storing everything on one machine, the laptop has a 256gb SSD and 2x 750GB hdds in raid 0, there is a 2TB WD black attached to the eSATA on the dock.
      eGPU and external HDD are powered by a 500W evga desktop ATX psu, the EXP GDC's ATX power adapter was clunky and broke while trying to use it, so I just plugged in a CPU 4 pin cable upside down to power it, not worried about it because the bulk of power is coming from the 8 pin on the GPU anyway.
      https://imgur.com/a/L2UUSL2
    • By Buratos
      Привет. Помогите, мне грустно.
      Существует clevo p150em, недавно обновленный с 7970 до 8970 м (от 150 см)
      Bios, R.2.0 / 1.02.17EC v3b / 1.02.11EC.
      Когда он был установлен 7970 м, в BIOS на линии gpu это было 7970 м. После установки 8970m, NVIDIA пишет вместо 8970m.
      Драйверы на 8970m не установлены, либо синий экран, либо ноутбук замерзает. Windows 10 1713.
      Я пробовал разные версии драйверов, все равно. Что вы посоветуете?
      8970m vbios  VER015.041.000.000.044964 BR44964.009 it s DELL? 
       
      ps. when I bought 7970m for a place of 670m. At 7970m there was also a problem with the drivers, but I somehow skipped it.
    • By Logan
      Hello guys,
       
      I've no idea where to post it, so this thread seems to be the most logical one, for me at least. 

      However here is the link with the news about their upcomming GPUs suited for gaming: 

      https://www.pcbuildersclub.com/2018/06/arctic-sound-intel-bestaetigt-dedizierte-gaming-grafikkarte-ab-2020/
    • By ruxik93
      So I'm a recently father of 1 and struggling military personnel. No need for more details. I'm building a "gaming desktop" out of parts I'm collecting out of other people's trash basically. Running on all 2012 standards. currently I'm using a AMD Athlon II x4 clocked at 2.6 GHz on a Pegatron M2N78-LA (Violet6) motherboard with 500Gb of space and a Zotac Nvidia GT 640. I'm really proud of this setup so far because the overall price of the desktop is currently sitting at $10 for the Arctic Silver to replace the old thermal paste. The main thing I'm wanting to know from this community is whether or not the AMD Phenom is a decent processor. On paper it looks fine, but i have never built with it before, therefore I'm uncertain. Also if anyone knows of a cheap cheap MOBO that is still high quality and has 4 DIMM slots and preferably at least AM3+.
    • By xerman
      Hello all! Im posting this here in hope to receive some orientation or help regargind my egpu project.
       
      I have my old and trusted Acer 5750G and I’m still using it everyday for work. I’m a photographer and it has worked quite well with some upgrades:
      -Upgraded i5 to i7 2630qm.
      -Upgraded ram, 8gb to 16 gb.
      -Upgraded HD to SSD.
       
      Some facts:
      – I have the unlocked bios so I was able to set the mpci port as “hot pluggable” and I can also deactivate the dedicated nvidia 630m from the bios itself.
      – I have bough this case [PCIe PCI-E EXP GDC External Laptop Video Card Dock / Laptop Docking Station (Mini PCI-E interface Version) ] that will arrive home in 10-15 days.
      – I have ordered a wifi usb card.
      I was thinking in getting a nvidia 1060 6gb and plug it to my old laptop using the mpci port. I ask for your advice and knoledge regarding this:
      1- Is this a good card choice?
      2- Will I face any problem with my setup or there is something important I should take into consideration?
      3- Will software that uses CUDA (photoshop and premiere, for example) get reinforced with the new card?
      4- How much processing power will get lost for the “small” port I will be using?
      Thanks a lot again, and sorry for my english mistakes!!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.