Jump to content
EwinRacing Flash Series Gaming Chairs
Uness

NEED HELP Upgrading alienware M17X R4 GPU and Screen

Recommended Posts

That usually shouldn't cause an 8 beep error, the system should still detect the 980M and allow the system to boot. If you had another MXM laptop to test the card then that would help but my guess would be the card being bad, if you have the BIOS set correctly

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Henrik9979
      Okay here is what's going. I have a alienware m18x r1 running an amd 8970m, I wanted to upgrade it to crossfire but I could see a 8970m was more expensive than a r9 m290x
      So I decided to buy a r9 m290x and see if I could make it work in my alienware and also run crossfire.
      Even though many shops refused to sell me one because the didn't think it would work in an alienware m18x r1 only in the r2.
       
      Here is the whole process.
       
      19/08/17 23:15
      No post bios showing when booting, so impossible to enter bios menu, but can boot into windows 10 with no problems.
       
      19/08/17 23:20
      Because I haven't deleted the old AMD 8970m the r9 m290x shows as a 8970m with no problems.
       
      19/08/17 23:34
      First performance test was a success. The r9 m290x changed p-state normally. The gpu fan start spinning normally. But because of no thermal paste, the test lasted 20 seconds because the temperature raised fast.
       
      20/08/17 00:00
      Created a backup of the vbios version
      015.032.000.004.044450
       
      20/08/17 00:10
      Flashed a new clevo vbios version 015.032.000.003.044465
      Caused the card to be corrupted and resulted the 8 beep code.
       
      20/08/17 00:35
      Finally managed to flash the back and return the graphics card to its original state.

      20/08/17 00:50
      Flashed a new dell vbios version 015.046.000.014.045579
      No change in behavior
       
      20/08/17 01:07
      After trying multiple vbios with no luck I finally found one.
      Dell vbios Version 015.041.000.000.044966
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      Note: This vbios reduce the cards performance from 900 mhz to 850 mhz
       
      20/08/17 01:21
      After more testing I found one that is working with no limits.
      Clevo vbios version
      015.036.000.005.044618
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      This will be the vbios I will keep at the moment.

      20/08/17 01:56
      I completely uninstalled the previous driver and installed the newest driver. The graphics card is recognized as a 8970m but works normal.

      21/08/17 20:15
      I have inserted my old 8970m in the secondary slot and will start testing crossfire.
       
      21/08/17 21:45
      I have found out that the fan for the secondary fan did not spin. The is a cable that have felt out. I will fix it now.

      21/08/17 22:00
      In my try to test crossfire compatibility, I installed the newest AMD driver 17.7.2 but as soon it installed the driver for the secondary card it caused black screen. Only booting the computer in safe mode brings the screen back.

      21/08/17 23:02
      After many frustrating hours I finally managed to get crossfire working with the r9 m290x as the primary card and my old 8970m as the secondary.
      I have flashed the same vbios on both cards so the r9 m290x shows up I device manager as a 8970m.
       
      I first installed AMD driver version 16.2.1
       
      Then installed AMD driver version 16.6.1 in order to play battlefield

      21/08/17 23:20
      First test run in battlefield 1

      21/08/17 23:40
      Battlefield 1 is flickering bad, this can maybe be solved with a new patch or driver.
      Other games I have tried is working perfect with crossfire on.


      Now what I would like to try is somehow force the r9 m290x driver to be installed and see if it will make it possible to run the latest AMD driver without getting a blackscreen.
       
      I have tried to edit the .inf file like you would do with nvidia but no luck.
      I have also tried to figure out how to edit the device id in the vbios, but I find it too complex.
    • By whysigninwall
      Hi everyone i was wondering if it was possible to upgrade the clevo P775DM3-G to P775TM1-G you know if feasible by buying new motherboard and new heatsink, my idea was to upgrade to i9 9900k and rtx 2080/2070.
       
      Motherboard Clevo P775DM3-G
      https://clevo-computer.com/it/spare-parts/clevo/clevo-p-serie/p7xx/p77x/p775dm3-g/2443/6-77-p775dm3a-n03-mainboard-motherboard-clevo-p775dm3-g
       
      Motherboard Clevo P775TM1-G
      https://clevo-computer.com/it/spare-parts/clevo/clevo-p-serie/p7xx/p77x/p775tm1-g/2511/6-77-p775tm1a-n02-mainboard-clevo-p775tmx
       
      Heatsink rtx 20xxx
      https://clevo-computer.com/it/spare-parts/clevo/heatsinks/1162/6-31-p77fn-401-cpu-vga-heatsink-module-for-nvidia-rtx-2060-n18e-g1-rtx-2070-n18e-g2-rtx-2080
      PS: I thank you to all  in advance.
    • By Klem
      Klem's_vbios_DELL_GTX880M_80.04.F5.00.07_UNLOCKED.rar
      For 8Gb card.
      1. Unlocked Nvidia core limit +135 MHz.
      2. Unlocked core voltage adjustments.
      3. Unlocked Power Limit.
      4. Unlocked Power adjustment by software (for example with Nvidia Inspector).
      5. Increased Power Limit and Power Target.
      6. Enabled some additional tweaks.
       
      If you liked my mod, you can buy me some beer:   https://www.buymeacoffee.com/ekushukovZ
    • By Noxco
      Hello to all can you help me change the graphics card?
      Alienware m17x r4
       i7 3610qm
      quadro k4100m
      display 120hz 3d
      bios a15
      trying to install 980m but not getting 5 or 8 beeps removed the battery and reset the bios. disabled legacy and secure boot in settings windows 10 gpt uefi
      help how to be?
    • By OnaStack100
      I have a p150sm which has a seemingly dead 780m due to a perpetual error 43 which came after a big BSOD about 6 months ago. I upgraded the laptop to a 980m and modded the inf files. The upgrade was perfectly fine for a week. One day, i left the laptop and something related to sleep or power may have caused the laptop to shut off. Since then, the laptop with the 980m won't boot. I tried many things like resetting cmos, taking out the hardware and putting it back in, and resetting bios, and buying a 230W adapter. Nothing worked. The laptop works fine with the old dead 780m in there, but now when the 980m is in there, holding the power button generates a green light flash and then the power LED goes back to orange. No sounds, maybe one tick, and that's it. What is left to try?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.