ironer1 Posted July 3, 2015 Share Posted July 3, 2015 After prema's vbios mod is failed at my card, i tried to restore with stock rom, but it is also failing.Really need help.Microsoft Windows [Version 6.1.7601]Copyright © 2009 Microsoft Corporation. All rights reserved.C:\Users\JN>cd C:\Users\JN\Desktop\Bios\CLEVO_6GB_GTX970M_OC_PM_v1.1C:\Users\JN\Desktop\Bios\CLEVO_6GB_GTX970M_OC_PM_v1.1>C:\Users\JN\Desktop\Bios\CLEVO_6GB_GTX970M_OC_PM_v1.1\ModMe.batC:\Users\JN\Desktop\Bios\CLEVO_6GB_GTX970M_OC_PM_v1.1>nvflash -i 0 -6 970MPMOC.romNVIDIA Firmware Update Utility (Version 5.206)Modified Version for Prema Mod!Checking for matches between display adapter(s) and image(s)…Warning: Please make sure the NVIDIA Display Driver is not loaded by disablingusing Device Manager before continuing. Else update may fail, andsystem may crash!Press ‘y’ to continue (any other key to abort):Adapter: GeForce GTX 970M (10DE,13D8,1558,7102) H:–:NRM S:00,B:01,PCI,D:00,F:00NOTE: EEPROM does not contain board ID, skipping board ID check.WARNING: Firmware image PCI Subsystem ID (10DE.1558)does not match adapter PCI Subsystem ID (1558.7102).Current – Version:Unavailable (Invalid) ID:0000:0000:0000:0000Replace with – Version:84.04.22.00.F1 ID:10DE:13D8:10DE:1558GM204 Board (Normal Board)Update display adapter firmware?Press ‘y’ to confirm (any other key to abort):The display may go *BLANK* on and off for up to 10 seconds or more during the update process depending on your display adapter and output device.Identifying EEPROM…EEPROM ID (C8,4012) : GD GD25Q20 2.7-3.6V 2048Kx1S, pageWARNING: Adapter does not have a preservation table,unable to preserve board settings.Clearing original firmware image…Storing updated firmware image……….Verifying update…ERROR: Mismatch at offset 0x00000000 – Expected value: 0x4E – Read back: 0x06- - - Updated - - -+Exacelly same error pops up at safe mode. also i removed nvidia driver with DDU.What should i do? Quote Link to comment Share on other sites More sharing options...
AziraphaleUK Posted July 3, 2015 Share Posted July 3, 2015 Looks like you are flashing in windows try creating a bootable DOS USB Flash drive and flash that way.You can use Rufus to create a MS-DOS bootable usb drive. Just make sure the option (Create a bootable disk using " is set to MS-DOS.Extract your flash files to the newly created DOS usb drive, then boot your machine. Press F7 at machine startup and select the USB device. Then follow the instructions included in the Vbios.Hopefully you'll be able to flash a working Vbios.Rufus https://rufus.akeo.ie/ Quote Link to comment Share on other sites More sharing options...
Guest Posted July 3, 2015 Share Posted July 3, 2015 There is no DOS NVFLASH for GTX9 cards...use this one in safe mode with uninstalled driver:https://mega.co.nz/#!KZNx3b4D!1HY49YY5Rl1VoN3F-joCbTb2wNRnFGWIL2lpmm5AAQQPW: premamod.com Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 3, 2015 Author Share Posted July 3, 2015 There is no DOS NVFLASH for GTX9 cards...use this one in safe mode with uninstalled driver:https://mega.co.nz/#!KZNx3b4D!1HY49YY5Rl1VoN3F-joCbTb2wNRnFGWIL2lpmm5AAQQ PW: premamod.com Still same error is happening Quote Link to comment Share on other sites More sharing options...
Guest Posted July 3, 2015 Share Posted July 3, 2015 The vBIOS chip on your card just seems a bit flacky…Try the normal Mod version NVFLASH a couple more times all it needs is a single successful write... Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 3, 2015 Author Share Posted July 3, 2015 I tried with nvflash 5.218 15 times but still no luck Quote Link to comment Share on other sites More sharing options...
Guest Posted July 3, 2015 Share Posted July 3, 2015 No no, the other NVLASH that comes with the Mod... Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 3, 2015 Author Share Posted July 3, 2015 I tried 50 times from now.Yup. Same error again and again.Any other ways to solve this sh*t? Quote Link to comment Share on other sites More sharing options...
Guest Posted July 3, 2015 Share Posted July 3, 2015 Check your GPU for physical damage of one of the tiny resistor. [Not the vBIOS generates the board HWID (which is apparently missing) but the resistor setup on the MXM board...]EDIT: Do you always get this exact value?:Mismatch at offset 0x00000000 – Expected value: 0x4E – Read back: 0x06The first 476 bytes of your flash chip may be locked or not working correctly. We could make a vBIOS that only begins after that...Try this version which will force the entire chip to be re-written:https://mega.nz/#!mQ83GABB!DZ4HWn5pzwcbLJzQCfyhNn06wNi_5GVs2vrOB6RXbtU Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 4, 2015 Author Share Posted July 4, 2015 Microsoft Windows [Version 6.1.7601]Copyright © 2009 Microsoft Corporation. All rights reserved.C:\Users\JN>cd C:\Users\JN\Downloads\CLEVO_6GB_GTX970M_OC_PM_v1.1C:\Users\JN\Downloads\CLEVO_6GB_GTX970M_OC_PM_v1.1>modmeC:\Users\JN\Downloads\CLEVO_6GB_GTX970M_OC_PM_v1.1>nvflash -i 0 -6 970MPMOC.romNVIDIA Firmware Update Utility (Version 5.206)Modified Version for Prema Mod!Checking for matches between display adapter(s) and image(s)...Warning: Please make sure the NVIDIA Display Driver is not loaded by disabling using Device Manager before continuing. Else update may fail, and system may crash!Press 'y' to continue (any other key to abort):Adapter: GeForce GTX 970M (10DE,13D8,1558,7102) H:--:NRM S:00,B:01,PCI,D:00,F:00NOTE: EEPROM does not contain board ID, skipping board ID check.WARNING: Firmware image PCI Subsystem ID (10DE.1558) does not match adapter PCI Subsystem ID (1558.7102).Current - Version:Unavailable (Invalid) ID:0000:0000:0000:0000Replace with - Version:84.04.22.00.F1 ID:10DE:13D8:10DE:1558 GM204 Board (Normal Board)Update display adapter firmware?Press 'y' to confirm (any other key to abort):The display may go *BLANK* on and off for up to 10 seconds or more during the update process depending on your display adapter and output device.Identifying EEPROM...EEPROM ID (C8,4012) : GD GD25Q20 2.7-3.6V 2048Kx1S, pageWARNING: Adapter does not have a preservation table,unable to preserve board settings.Clearing original firmware image...Storing updated firmware image.............Verifying update...ERROR: Mismatch at offset 0x00000000 - Expected value: 0x4E - Read back: 0x06- - - Updated - - -So let me explain more:First- i failed with your mod and restored with your stock rom << this was successfulafter i used svl0's vbios mod(with mnvflash) and it was successful. but after rebooting it gives error from bios, which beep 22 times with full-fan and force shutdown.i gave another try with your moded vbios, and failed. after this failing, i cant restore to stock rom also.what should i do from now?- - - Updated - - -http://pastebin.com/5T6fZ74hMnvflash log.- - - Updated - - -http://pastebin.com/NQDzgacBPrema's nvflash log. Quote Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 If the svl7 version caused this then try to use that nvflash to restore it with any of the stock or Mod versions.From what I can see from the logs your vBIOS chip is unable to read the first 476 bytes of the chip. One possible scenario would be to make a special Mod which skips these broken sectors... Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 4, 2015 Author Share Posted July 4, 2015 If the svl7 version caused this then try to use that nvflash to restore it with any of the stock or Mod versions.From what I can see from the logs your vBIOS chip is unable to read the first 476 bytes of the chip. One possible scenario would be make a special Mod which skips these broken sectors...The funny thing is i was succeeded at rom flashing with your program 3hrs ago.after that success, Tried to overclock - BAM - bluescreen!And... yeah. rom is broken again as i firstly wrote.What the f*ck? How can this happen?!?!?! Quote Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 Your card may have shipped with an unreliable vBIOS chip.Does it work on stock clocks? Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 4, 2015 Author Share Posted July 4, 2015 Your card may have shipped with an unreliable vBIOS chip.Does it work on stock clocks?IIRC yes. it worked.but it also have throtteling. Quote Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 The crash may simply have been caused by an unstable overclockIt can not throttle on Clevo systems with my vBIOS Mod unless the card reached 92, just make sure to also use the latest IntelGPU driver. Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 4, 2015 Author Share Posted July 4, 2015 But how it can also break rom of the card?And how to fix this problem? Quote Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 Your card probably shipped with a unreliable vBIOS Chip...once you get the Mod properly flashed don't touch it anymore. Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 4, 2015 Author Share Posted July 4, 2015 Kay. thanks wow its so hard to flash a once Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 5, 2015 Author Share Posted July 5, 2015 Prema. should i install inf modded driver or not? Quote Link to comment Share on other sites More sharing options...
Guest Posted July 5, 2015 Share Posted July 5, 2015 You need to mod the .inf until v3 gets released to public... Quote Link to comment Share on other sites More sharing options...
Lee James Wood Posted July 8, 2015 Share Posted July 8, 2015 I tried 50 times from now.Yup. Same error again and again.Any other ways to solve this sh*t?there is, we can always just send you the vbios chip to solder on, its actually very easy to do, if your a steady hand or especially easy if you learnt to solder professionally.I am certain there are places you can ship it to, to have it done for you, rather cheap too. Anyways, you might not even need to, some places can flash the card without removing the chip even haha.- - - Updated - - -(Love Prema, he is so clever...)Anyways, Iron, where did you buy the Videocard ?Does it use the Hynix NAND or Samsung ? Is it Blue or Green PCB ?Are the Capacitors smooth and glossy or rough and edgy with almost a see through circle(the caps underneath the insulation)?I have heard very few complaints about 970M or 980M from any vendor anywhere really. I have yet to return a single one of either, out of thousands sold. Unbelievably reliable, so that's why I ask. I am curious if only the north American ones are good or if the ones from China are good too. Quote Link to comment Share on other sites More sharing options...
ironer1 Posted July 8, 2015 Author Share Posted July 8, 2015 ImgurBlue and samsung NAND. Quote Link to comment Share on other sites More sharing options...
Lee James Wood Posted July 19, 2015 Share Posted July 19, 2015 Well, that sounds like the same kind Sold by the better vendors in North America. Rare to hear of such an issue with these. Make me paranoid now, to quadruple check them all now, but I was looking at like 5 of them the otherday, and they all seemed so damn identical, and flawless. I would return it to where ever you bought it from, and ask them for a new one. If the vbios chip is faulty, its still probably their fault, and they wouldn't be able to prove much, with the chip being faulty, they're have to hook up to it, or cut it off (or desolder it, lol) and check it on another card.Most likely, you would be more then safe getting the exact same card replaced by the same vendor too. I'd put money on it being okay, unless you bought it from China, or one of those vendors that sell refurbished stuff. (there are people out there that only sell things they fixed, and sell them for really high margins of profit. They're the only cards like your describing, that I have heard of to date having issues, they get these cards because some vendors test them, before selling, and if they are no good they sell them as scrap or return them to where they came from. Somehow, these scavengers get them. Same thing with those Engineering Sample CPU's, though, those are also considered stolen tech, by INTEL.) Quote Link to comment Share on other sites More sharing options...
Lee James Wood Posted July 22, 2015 Share Posted July 22, 2015 ImgurBlue and samsung NAND.So, any luck ? Where did you buy the chip/Card ? Quote Link to comment Share on other sites More sharing options...
ironer1 Posted August 1, 2015 Author Share Posted August 1, 2015 So, any luck ? Where did you buy the chip/Card ?Yes! i sucessfully replace the chip which i found at Ebay.thanks for detailed info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.