
-
Similar Content
-
By n0br4n
Hello guys,
I've a really weird problem. My laptop has started beeping when use nvidia gpu yesterday. I dissambled my laptop and tried to plug out every single hardware and test them one by one. There's 22 beeps and equal interval beetween them. It goes shutdown after that 22 beeps.
My laptop is Clevo W650SJ and it uses Nvidia 840M gpu. That problem isn't causing because of windows or installed driver cos i tried to reinstall windows but it started to beeping when w10 installer check devices. Also I've bios password on startup , if i don't type password and hit the enter , it starts beeping after 10-15 sec. Also fan speed goes up to maximum and it doesn't slow down untill i shut it down or shutdown itself.
If i use any program or run a game which uses nvidia gpu , it starts beeping but if i close the game on first beeps , beeping is stops. But fan speed still maxiumum until i shutdown to pc.
I am looking a way to fix it. I didn't make any changes on my pc before than this problem.
-
By bigchuk00
Hello everyone. Just got a used sager p157sm for a gpu upgrade project and noticed it beeps for a minute then shuts down by itself when under load. It does well when watching movies but when benchmarking the issue pops up. At first I thought it was the gpu so I unplugged it but still occurs. Now it's running only CPU and still does the same things after repasting. Temps of CPU remain along 80 - 87 degrees centigrade. I've cleaned system components and changed Ram modules and slots still nothing. Any help will be appreciated.
-
By ahumayun22
Hi People reading this post,
I've been having so many problems with the P640RE Def ||
but in the last week or so random shutdowns while idle or gaming, I suspect it is motherboard 'cause when it shutdowns and I try to turn it back on it doesn't and have to wait some seconds also the charger needs to be replugged. On time varies for some reason. Sometimes it's 5 minutes or 8 hours?!!?!
Google Fu is useless here!
Thx,
Abdullah
-
By jonilink
Specs:
Sager branded Clevo P170EM
16gb ddr 3
AMD 7970M
i7-3820QM
BIOS 1.00.04bLS2
I'm working on this laptop for a friend and it will NOT stay on more than a couple minutes before it shuts down. I have tried everything that i can think of and it still shuts down. Im thinking it some kind of thermal or video card problem but I cant quite narrow it down.
here are the things i have tied:
cleaned/re greased both fans.
cleaned all heat sinks fins
lapped and reapplied thermal paste
reapplied thermal tape to the GPU
replaced CMOS battery
reset CMOS
removed/reinstalled all drivers for iGPU an the 7970
tested all ram in a seperate latop top individually
swapped fans to test headers
After all of this it still will beep about 20-22 times and shut down it is in no way getting hot the fans still spin but the computer still shuts down.
What else can i try ? I can't be the only one who has this problem. I've added a file that show the bios version.
-
By TonytotheB
I wondered if anyone else had come across this problem with a laptop other than a NP9377
I have posted there but that's limited to NP9377 owners
Laptop in sig
Flashed v1 Prema BIOS a while to help with throttling. I live in New York. It's crazy hot here
I was getting random BSODs with the std BIOS so that's why I upgraded it
Then started getting them again. Have a Coolermaster U3 so temps were fine
Prema came out with v2 so flashed that. Followed instructions
Now laptop won't stay on for more than 15 seconds
It even shuts down when in the BIOS
It sometimes gets to Windows and takes 5 seconds to shut down again
Shutdown - screen goes off and keyboard lights go and fans stop
Tried:
- Clearing CMOS (overnight disconnection, power drain for 30s using power button, AC only)
- Both sticks of RAM (which doesn't say RAM has not got both dodgy module)
I also cannot get back into flash as it shuts down even when in DOS
Anyone had this before?
I have a support ticket in with Eurocom where I am expecting them to charge me to sort the BIOS flash if that's the problem
Thanks in advance
(Please move if I have posted in the wrong forum)
-