danyell3 Posted April 2, 2013 Share Posted April 2, 2013 I upgraded my bios to 223 and now I can't get windows to boot at all and I need a way of downgrading the bios firmware without booting into windows because easyflash wont let me downgrade. What a useless feature >_> Quote Link to comment Share on other sites More sharing options...
svl7 Posted April 2, 2013 Share Posted April 2, 2013 Did you upgrade to stock 223? Quote Link to comment Share on other sites More sharing options...
danyell3 Posted April 2, 2013 Author Share Posted April 2, 2013 Yes also I forgot to mention that this is on an asus g75 and I'm wanting to downgrade to the 207 firmware- - - Updated - - -Also I can't get into windows because I was attempting a restore via the backup disks when this happened Quote Link to comment Share on other sites More sharing options...
tgzander Posted April 14, 2013 Share Posted April 14, 2013 i had this same issue when i updated my bios still looking for a solution Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted April 15, 2013 Bios Modder Share Posted April 15, 2013 What is happening now with the laptop? When you restart the BIOS menu opens? Quote Link to comment Share on other sites More sharing options...
icemans2k02 Posted May 10, 2013 Share Posted May 10, 2013 I had the same issue. I had to send mine off for rma as it basically disabled the sata contollers on board and I couldnt install windows or boot from it Quote Link to comment Share on other sites More sharing options...
seagren Posted May 30, 2013 Share Posted May 30, 2013 any updates guys on this one? the same happened to me yesterday Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted May 30, 2013 Bios Modder Share Posted May 30, 2013 You are cruel people. You must go to your BOOT Tab in BIOS menu and DISABLE Fast Boot, Enable Launch CSM, DIsable PXE Rom, then go to your SECURITY Tab and DISABLE Secure Boot. Save changes in BIOS and restart. Quote Link to comment Share on other sites More sharing options...
al7zeen Posted July 2, 2013 Share Posted July 2, 2013 It occurred to me a black screen after the update has been changed for motherboard Quote Link to comment Share on other sites More sharing options...
R1GG5 Posted July 2, 2013 Share Posted July 2, 2013 disable secure boot,then you will have the option to enable csm and the option pxe rom, you will have to setup your boot order again after you reboot. Quote Link to comment Share on other sites More sharing options...
al7zeen Posted July 4, 2013 Share Posted July 4, 2013 Enter bios, rapidly spam your F2 key when the computer turns on. - Switch to "Boot" and set “Launch CSM” to Enabled. - Switch to "Security" and set "Secure Boot Control" to Disabled. - Press F10 to save and exit. Quote Link to comment Share on other sites More sharing options...
zac_drake Posted September 6, 2013 Share Posted September 6, 2013 Did you manage to work it out? I'm wondering if I should flash my Asus k55vm so I can disable some options to run OS X with no problems... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.