Giagbyte

If you're using a mechanical HDD too so you'll be limited not by the SATA 2 interface but the HDD itself SSD's will be limited by SATA 2 though but then when you use a SATA 3 to USB 3.0 enclosure you will then be limited by USB 3.0

Had some experience with them, I've got a couple. One of them died after about 3.5 years so not Great but not too bad either, as long as you don't throw them around too much they'll last for ages and being able to have 2TB in your back pocket is great!

Not sure if you've fixed/RMA'd it yet but did you check if the drive was spinning? Could you feel any vibration coming from the drive? Then in the BIOS do you have SATA configured as AHCI or IDE? If it shows up in the BIOS then go to Control Panel>System>Device Manager and hit scan for plug and play devices. Then you can go into Disk management and it should ask you to configure the HDD as either MBR or GPD, I suggest GPD if you're not going to use it with an OS prior to Win Vista

Hi, I have an EVGA GTX 780 SC with B1 stepping and 80.80.21.00.80 BIOS. Which modded BIOS can I use? I tried to Dl the attachment on page 68 of this thread but I can't Thanks!